Buldozere de talie mare Cat® D8T

The Cat D8T dozer has a long history of outstanding versatility, productivity and resale value. Because this bulldozer excels across a wide range of tasks, customers choose the D8T for everything from dozing, ripping, scraper work and land clearing to finish grading. And with features designed for even greater comfort, productivity and fuel efficiency, today's D8T does even more to help you meet your business objectives.

Utilaj nou, second-hand sau de inchiriat, dumneavoastra alegeti!

Cat Connect Technologies

Cat Connect makes smart use of technology and services to improve your job site efficiency. Using the data from technology equipped machines, you'll get more information and insight into your equipment and operations than ever before.

Cat Connect services are also available from your dealership including:

Equipment Management – increase uptime and reduce operating costs.

Productivity – monitor production and manage job site efficiency.

Safety – enhance job site awareness to keep your people and equipment safe.

GRADE for Dozers

Cat Connect GRADE technologies help you hit target grade faster and more accurately. Finish jobs in fewer passes, and with less operator effort, saving you time and helping you increase profit.

Cat Slope Indicate (Standard) – displays machine cross-slope and fore/aft orientation, helping operators work more accurately on slopes.

Cat Grade with 3D (Optional) – factory-integrated grade control system that enables operators to improve grading efficiency, accuracy and productivity. The system automates blade movements in both fine grading and production dozing applications, reducing manual operator inputs by as much as 80 percent.

Integrated design moves the antennas to the top of the cab, eliminating masts and cables traditionally on the blade. 3D mapping of blade and tracks reduces the need for grade checkers and staking, enhances safety and reduces labor costs.

Cat AccuGrade (Optional) – dealer-installed aftermarket grade control system provides higher accuracy capabilities by adding laser, GPS and UTS technology when required. Factory AccuGrade Ready Option provides optimal mounting locations, brackets, and hardware and simplifies installation.

Auto Blade Assist (Optional) – increases efficiency while reducing operator workload. ABA makes use of preset blade pitch positions for the load, carry, and spread portions of the cycle.

AutoCarry (Optional) – automates blade lift to maintain desired blade load, improve load consistency, and reduce track slip. Works seamlessly with GRADE with 3D.

Automatic Ripper Control (Optional) – automatically controls ripper height to limit track slip in hard ripping applications.

COMMAND for Dozing

When dozers work in hazardous mining and earthmoving applications, remote control dozing helps improve safety and efficiency by taking operators off of their machines and letting them work from either nearby or remote locations. Optional COMMAND for Dozing is deeply integrated with Cat machine systems to enable smooth, precise control for maximum efficiency and productivity.

  • Over-the-shoulder operator console provides line-of-sight remote control operation from up to 400 meters (437 yd) away.
  • Comfortable remote operator station offers both line-of-sight and non-line-of-sight remote control.

LINK Technologies

LINK technologies provide wireless capability to machines enabling two-way transfer of information collected by on-board sensors, control modules, and other Cat Connect technologies using off-board apps, such as our VisionLink® software.

Product Link™/VisionLink

Product Link takes the guesswork out of equipment management. Track location, hours, fuel usage, productivity, idle time, and diagnostic codes through the online VisionLink interface. Manage your fleet in real time so you can maximize efficiency, improve productivity, and lower operating costs.

Power and Performance

A Cat C15 ACERT engine gives you the power and reliability you need to get the job done. Fuel economy, plus efficient use of Diesel Exhaust Fluid (DEF) gives you excellent overall fluid efficiency.

Differential Steering

Differential Steering maintains full power to both tracks for best-in-class turning, even with a full blade load. When one track speeds up, the other slows down an equal amount, so you have better maneuverability and faster cycle times. You also get better load capacity, power and speed control in soft conditions because both tracks are powered during turns.

Load Sensing Hydraulics

Field-proven load-sensing hydraulics continuously adjust hydraulic power based on load to maximize your work tool. Independent hydraulic pumps ensure no sacrifice in performance when steering and controlling blade simultaneously.

Torque Divider

A single stage torque divider sends 70 percent of engine torque through a converter and the other 30 percent through a direct drive shaft so you get more power to the ground, more efficiently.

Cooling System

The radiator, Air To Air Aftercooler (ATAAC) and hydraulic oil cooler are packaged in a single plane, making cleanout easier. Durable, aluminum bar plate construction gives you superior heat transfer and corrosion resistance. Six fins per inch on the standard core allow debris to pass through and help reduce plugging.

In cooler conditions, the hydraulic demand fan reduces speed to conserve power, save fuel and decrease sound levels. An optional reversing fan is available for high debris conditions.

Advanced Productivity Electronic Control System (APECS)

The Planetary Power Shift Transmission uses integrated electronic controls to automatically modify shift points based on load and operating conditions. The result is smoother shifting overall, as well as greater benefits from Enhanced Auto Shift.

Enhanced Auto Shift

Enhanced Auto Shift is a standard feature that allows your operator to select the optimum ground speed for the job. It also helps you save fuel by automatically choosing the most efficient gear based on load.

Selectable Electro-Hydraulic Maps

Customizable E-H maps allow you to set the implement response/speed levels to match operator preferences and tailor the machine to individual applications.

Special Arrangements

D8T WH Waste Handler

Whether building or closing cells, pushing trash or spreading cover, the D8T WH is designed and built from the frame up to take on the unique challenges of landfill work.

        
  • Specialized guarding, striker bars and seals help protect the machine from impact and airborne debris.
  •     
  • Insulated Clean Emissions Module and thermal shields provide a high level of thermal protection.
  •     
  • Bottom and Final Drive guarding help prevent debris from wrapping around or damaging vital components.
  •     
  • Faster cleanout and enhanced safety with new optional Powered Bottom Guards.
  •     
  • The cooling system is designed for high debris environments, with easy access for cleanout.
  •     
  • Lights are mounted up and away from main debris area for protection, while still shining plenty of light on the work area.
  •     
  • Specialized air handling features help deliver cleaner air to the machine and to the cab.
  •     
  • Landfill blades and center-hole track shoes help you optimize your waste handler for the job.

D8T Stockpile Machine

  • Specialized guarding and seals help protect the machine from damage and debris build-up.
  • Faster cleanout and enhanced safety with new optional Powered Bottom Guards.
  • Insulated Clean Emissions Module and thermal shields provide a high level of thermal protection.
  • The cooling system is designed for high debris environments, with easy access for cleanout.
  • Additional features like a screened precleaner and roof-mounted filter help protect both the machine and the operator in high debris conditions.
  • Special woodchip and coal blades, along with specialized track shoes, let you outfit the machine for the job.

Operator Environment

The latest D8T offers operators added comforts like a quieter cab, adjustable armrests and a heated/ventilated seat option. A seat belt indicator light helps remind you to work more safely.

A color touch-screen display puts the machine's programmable control features right at your fingertips. Control exterior lighting, activate the reversing fan and set productivity features like Autocarry™, Auto Rip and Enhanced Auto Shift. You can also access machine performance settings, diagnostics and much more. For complete information about functions and programming, please see the D8T Operation and Maintenance Manual.

Implement and Steering Controls

  • A single ergonomic handle with a thumb roller controls direction, turning, forward/reverse shifting and gear selection. Tiller style control helps you work more precisely in tight spaces.
  • Low-effort dozer lever with electro-hydraulic controls helps you work more comfortably and get precise work tool control. When equipped, single-handle convenience also controls functions like AccuGrade and Dual Tilt.
  • A ripper control with rigidly mounted hand grip provides firm support for the operator even when ripping in the roughest terrain.
  • Implement Lock-Out prevents inadvertent operation of hydraulic attachments when activated by the operator or automatically when the operator is not present.

Equipped for the Job

Bulldozers

High tensile strength steel, with a strong box-section design, stands up to the most severe applications. Heavy moldboard construction and hardened bolt-on cutting edges and end bits add strength and durability. Optional rock guards and standard deflector shields help protect cylinders.

The Tag-Link brings the blade closer to the machine for precision, lateral stability and constant breakout force, regardless of the blade height.

Optional Dual Tilt improves load control and allows the operator to optimize the blade pitch angle for better balance and productivity. Tilt the blade forward for better penetration, then tilt back to increase carrying capacity. Auto Blade Assist is standard with Dual Tilt to increase efficiency and reduce operator workload.

Blades and Performance Cutting Edges

High-Capacity Universal, Semi-Universal (SU) and Angle Blades are available, as well as special blades for coal and woodchip stockpile applications. A new, larger SU blade option offers 19 percent more capacity (10.3 m3/13.4 yd3) to help you move more material per pass.

The new blade features patented Performance Cutting Edges designed to help you work faster in hard/frozen ground or in moderately rocky applications. The cutting action increases blade load mass to move more material per pass. Blade control, load retention and traction are improved. The dozer digs deeper and ripping may be reduced in some situations.

Performance Cutting Edges are interchangeable with traditional cutting edges, and offer the same wear life/life cycle cost without the need to flip. For added versatility, the plane of the end bits enables finish grading.

Undercarriage

The D8T is built on a tough mainframe designed to absorb high impact shock loads and twisting forces. A fully suspended undercarriage provides more ground contact, especially in hard, uneven terrain. Greater traction means less slippage, better balance and a smoother ride. The elevated sprocket design helps protect major components from harsh impacts and provides a modular design that is convenient to service.

Heavy Duty undercarriage is standard and is well suited to aggressive applications like land clearing, side-slopes, or working in rocky or uneven terrain.

New, optional Cat Heavy Duty Extended Life Undercarriage is designed to help reduce your costs with heavier bushings for up to 30 percent more wear life. Patented crowned Dura Link is hardened for longer life and reduced scalloping, which improves ride after 50 percent link wear. The Extended Life Undercarriage is best suited to high abrasion conditions and features matching component wear life for easier maintenance.*

Rear Implements

To help match your dozer to the task at hand, you can outfit your D8T with a single-shank ripper, multi-shank ripper, winch, drawbar or rear counterweights. Ask your Cat dealer for available options to help you optimize your machine for the work you do.

*Comparisons to Positive Pin Retention undercarriage.

Serviceability and Customer Support

Ease of Service

The D8T is designed to help you get routine service done quickly and efficiently so you can get to work. The D8T offers full left-side engine serviceability, including fill tube, dipstick, air cleaner, fuel filters, oil filter and coolant level check. Easy cooling system access helps with faster inspection and cleaning. An optional high speed oil change attachment can make servicing even faster.

New optional Powered Bottom Guards help reduce downtime for maintenance and enhance safety. Doors are hydraulically actuated from a remote switch. Simply remove bolts and doors can be opened from the center for quick clean-out, or from one side for full access.

Major components like the engine, transmission and final drives are modular so they can be more quickly removed for service, saving you cost and downtime. The Ground Level Service Center gives you quick, easy access to the hour meter, battery disconnect, secondary engine shutdown, DEF purge indicator and light switch.

Cat EMSolutions (Equipment Management Solutions)

EMSolutions lets you take control of your fleet with a solution specific to your equipment management needs.

Comprehensive, technology-enabled equipment management – combined with the knowledge and expertise of your Cat dealer – can provide ways to help you achieve gains that go straight to your bottom line.

  • Improve availability
  • Reduce owning and operating costs
  • Streamline maintenance practices
  • Maximize equipment life
  • Increase resale value

Consisting of five levels of support, from remote access to equipment data to complete, proactive management of your fleet, EMSolutions allows you to choose the amount of support that's right for you.

Renowned Cat Dealer Support

Knowledgeable Cat dealers have a global reputation for providing outstanding sales and service. Maximize your equipment investment with a Customer Support Agreement tailored to meet your business needs. Take advantage of preventive maintenance programs like Custom Track Service, Scheduled Oil Sampling (S·O·SSM) analysis, and guaranteed maintenance contracts. Cat dealers can even help you with operator training to help boost your profits.

When you need repairs, Cat dealers and our unmatched Caterpillar distribution network excel at getting you the right parts you need quickly.

Your Cat dealer can also help you maximize your equipment investment with services like Cat Reman parts and Cat Certified Rebuilds. Remanufactured parts offer you the same warranty and reliability as new parts at a fraction of the cost. A Certified Rebuild gives a “second life” for your machine, incorporating the latest engineering updates so you end up with a like-new track loader and a new machine warranty. Caterpillar strives to provide customers the lowest owning and operating costs over the life of their machine.

Performance Features

Equip your D8T with optional features to help you get more work done in less time and at a lower cost.

Larger Semi-Universal (SU) Blade

  • Move more material per pass for up to 13 percent more productivity.
  • 13.4 yd3 (10.3 m3) – 19 percent more capacity.*

Performance Cutting Edges for SU Blades

  • Patented design moves more material per pass – cutting action loads blade faster, increases blade load mass by up to 25 percent.**
  • Easier blade penetration in hard/frozen ground, moderate rock – reduce ripping in some situations
  • Digs deeper – aids blade control, load retention, traction – reduces track slip, improves undercarriage life.
  • Equal wear life/life cycle cost** – no mid-life edge flip or end bit replacement required.
  • Built-in wear indicators, drilled and tapped holes for easier installation, interchangeable with traditional edges.
  • Versatility – on-plane cutting system allows finish grading.

Powered Bottom Guards

  • Reduce downtime, enhance safety.
  • Hydraulically actuated from remote switch.
  • Center opening for easy clean-out or side opening for full access.

Cat Heavy Duty Extended Life Undercarriage

  • 30 percent more bushing wear life.***
  • Reduced link scalloping – patented crowned Dura Link improves ride after 50 percent link wear.***
  • Matching component life for easier maintenance.
  • Best suited to high abrasion conditions.

COMMAND for Dozing

  • Remote control operation for enhanced safety and greater productivity.
  • Over-the-shoulder operator console provides line-of-sight remote control up to 400 m (437 yd) away.
  • Comfortable remote operator station offers both line-of-sight and non-line-of-sight remote control.

*Compared to Standard SU blade.

**Compared to standard cutting edges.

***Compared to Positive Pin Retention undercarriage.

Emissions Technology

Emissions reduction technology on the D8T is designed to be transparent, with no action required from the operator. Regeneration runs automatically in the background while you work.

Diesel Exhaust Fluid

Selective Catalytic Reduction utilizes Diesel Exhaust Fluid (DEF), which can be conveniently refilled when you refuel. A gauge on the dash shows your fluid level. The D8T offers excellent fluid efficiency. Across a variety of applications, the D8T typically has used DEF at a rate of 2-3 percent of fuel consumption.

When the machine is turned off, a pump will automatically purge the DEF lines to help prevent the fluid from freezing in the lines and pump. A symbol on the dash and a light/symbol on the Ground Level Service Center indicate when the purge is complete and that it is safe to turn off the electrical disconnect. If the engine/aftertreatment temperatures are high, a delayed engine shutdown will activate automatically to cool the machine and then purge the lines. For complete aftertreatment information, please refer to your machine's Operation and Maintenance Manual.

Specificatii tehnice

SPECIFICATII TEHNICE

Engine
Engine Model Cat C15 ACERT™
Flywheel Power 264 kW
Emissions U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4
Displacement 15.2 l
Bore 137 mm
Stroke 172 mm
Engine Power - Maximum - ISO 14396 (DIN) 268 kW
Engine Power - Maximum - SAE J1995 271 kW
Net Power - Rated - ISO 9249/SAE J1349 233 kW
Engine Power - Maximum - ISO 14396 268 kW
Net Power - Rated - ISO 9249/SAE J1349 (DIN) 233 kW
Weights
Operating Weight 39420 kg
Operating Weight - Standard 39750 kg
Shipping Weight - Standard SU Blade 30070 kg
Shipping Weight - LGP 31160 kg
Operating Weight - LGP 37420 kg
Operating Weights
Standard 39750 kg
LGP 37750 kg
Transmission
1 Forward 3.4 km/h
2 Forward 6.1 km/h
3 Forward 10.6 km/h
1 Reverse 4.5 km/h
2 Reverse 8 km/h
3 Reverse 14.2 km/h
Drawbar Pull - 3 Forward 197.5 kN
Drawbar Pull - 1 Forward 661.1 kN
Drawbar Pull - 2 Forward 363.1 kN
Hydraulic Controls
Pump Type Piston-type, Variable Displacement
Pump Output - Steering 284 l/min
Pump Output - Implement 244 l/min
Tilt Cylinder Flow - Rod End Flow 132 l/min
Tilt Cylinder Flow - Head End Flow 170 l/min
Bulldozer Relief Valve Setting 24000 kPa
Tilt Cylinder Relief Valve Setting 24000 kPa
Ripper - Lift - Relief Valve Setting 24000 kPa
Ripper - Pitch - Relief Valve Setting 24000 kPa
Steering 39200 kPa
Undercarriage - Standard
Length - Track on Ground 3206 mm
Track Gauge 2083 mm
Ground Clearance 613 mm
Width - Shoe 610 mm
Ground Pressure (ISO 16754) 89.6 kPa
Shoes/Side 44
Ground Contact Area 3.91 m²
Pitch 216 mm
Grouser Height 78 mm
Track Rollers - Each Side 8
Shoe Type Moderate Service
Undercarriage - LGP
Length - Track on Ground 3206 mm
Grouser Height 78 mm
Ground Pressure (ISO 16754) 53.3 kPa
Track Gauge 2337 mm
Track Rollers - Each Side 8
Ground Clearance 613 mm
Width - Shoe 965 mm
Ground Contact Area 6.19 m²
Shoes/Side 44
Shoe Type Moderate Service
Pitch 216 mm
Service Refill Capacities
Fuel Tank 627 l
DEF Tank 24 l
Cooling System 86 l
Engine Crankcase* 38 l
Power Train 155 l
Roller Frames - Each 65 l
Final Drive - Each 12.5 l
Pivot Shaft Compartment 40 l
Hydraulic Tank 75 l
Note *With oil filter
Blades - 8U
Ground Clearance 1239 mm
Height 1741 mm
Blades - 8SU - Version 1
Width - Over End Bits 3931 mm
Blades - 8U
Maximum Tilt 996 mm
Blades - 8SU - Version 2
Note (1) *Includes blade tilt cylinder.
Note (2) **Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.
Blades - 8SU - Version 1
Digging Depth 574 mm
Blades - 8U
Width - Over End Bits 4251 mm
Blades - 8SU - Version 1
Total Operating Weight** - With Blade and Single-Shank Ripper 39420 mm
Height 1690 mm
Blades - 8A
Capacity - SAE J1265 5.2 m³
Blades - 8SU - Version 2
Height 1750 mm
Blades - 8U
Total Operating Weight** - With Blade and Single-Shank Ripper 40055 kg
Blades - 8SU - Version 2
Total Operating Weight** - With Blade and Single-Shank Ripper 39420 kg
Blades - 8SU - Version 1
Note (1) *Includes blade tilt cylinder.
Blades - 8SU - Version 2
Digging Depth 578 mm
Width - Over End Bits 4041 mm
Blades - 8U
Capacity - SAE J1265 11.8 m³
Blades - 8SU - Version 2
Weight* - Without Hydraulic Controls 4789 kg
Blades - 8SU - Version 1
Note (2) **Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.
Maximum Tilt 892 kg
Weight* - Without Hydraulic Controls 4260 kg
Blades - 8U
Note (1) *Includes blade tilt cylinder.
Blades - 8SU - Version 2
Capacity - SAE J1265 10.3 m³
Blades - 8SU - Version 1
Ground Clearance 1288 mm
Blades - 8A
Width - Over End Bits 5045 mm
Blades - 8U
Weight* - Without Hydraulic Controls 4895 kg
Note (2) **Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.
Blades - 8SU - Version 1
Capacity - SAE J1265 8.6 m³
Blades - 8SU - Version 2
Maximum Tilt 915 mm
Blades - 8U
Digging Depth 567 mm
Blades - 8SU - Version 2
Ground Clearance 1236 mm
Winches
Winch Model PA 140OVS
Weight* 1790 kg
Oil Capacity 15 l
Increased Tractor Length 563 mm
Winch Case - Width 1160 mm
Drum Width 320 mm
Flange Diameter 457 mm
Recommended Cable Size 29 mm
Drum Capacity - Optional Cable 59 m
Note (1) *Weight: Includes pump and operator controls.
Cable Ferrule Size - Length 70 mm
Cable Ferrule Size - Outside Diameter 60 mm
Winch Length 1430 mm
Optimal Cable Size 32 mm
Drum Capacity - Recommended Cable Size 84 m
Ripper - Multi-Shank, Adjustable Parallelogram
Number of Pockets 3
Weight - With One Shank 3946 kg
Ripper - Single-Shank, Adjustable Parallelogram
Note *Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel. ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.
Ripper - Multi-Shank, Adjustable Parallelogram
Pry-Out Force - Multi-Shank Ripper with One Tooth 222.9 kN
Ripper - Single-Shank, Adjustable Parallelogram
Weight* - Without Hydraulic Controls 3957 kN
Pry-Out Force 222.7 mm
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole 636 mm
Ripper - Multi-Shank, Adjustable Parallelogram
Overall Beam Width 2464 mm
Ripper - Single-Shank, Adjustable Parallelogram
Number of Pockets 1
Total Operating Weight* - With SU-Blade and Ripper 39420 kg
Maximum Penetration - Standard Tip 1130 kN
Ripper - Multi-Shank, Adjustable Parallelogram
Maximum Penetration Force - Shank Vertical 124.2 kN
Weight - Each Additional Shank 332 kg
Maximum Penetration - Standard Tip 780 mm
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole 593 mm
Ripper - Single-Shank, Adjustable Parallelogram
Maximum Penetration Force - Shank Vertical 127.3 kN
Standards
FOPS Falling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 Level II.
ROPS Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008.
Brakes Crawler Machine Brake Requirements meets the following criteria: ISO 10265:2008.
Engine
Net Power - 1,900 rpm - ISO 9249/SAE J1349 264 kW
Note (3) All nonroad Tier 4 Final, Stage IV and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) with 15 ppm (mg/kg) of sulfur or less, or up to B20 biodiesel blended with ULSD. B20 should meet ASTM D7467...
Note (4) Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Air Conditioning System
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.5 kg of refrigerant which has a CO2 equivalent of 3.575 metric tonnes.
Weights - Waste Handler
Operating Weight - Standard 39650 kg
Operating Weight - LGP 41850 kg
Winches
Note (2) Variable speed, hydraulically driven, dual braking system, three roller fairlead.
Blades - 8 SU LGP Landfill
Digging Depth 513 mm
Blades - 8A
Digging Depth 625 mm
Blades - 8 SU LGP Landfill
Width - Over End Bits 4531 mm
Blades - 8A
Note (2) **Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.
Blades - 8U Landfill
Maximum Tilt 996 mm
Blades - 8 SU Landfill
Total Operating Weight** - With Blade and Single-Shank Ripper 40282 kg
Engine
Note (2) No derating required up to 3566 m (11,700 ft) altitude, beyond 3566 m (11,700 ft) automatic derating occurs.
Hydraulic Controls
Note (3) Electro-hydraulic pilot valve assists operations of ripper and dozer controls. A standard hydraulic system includes four valves.
Blades - 8A
Height 1177 mm
Blades - 8 SU LGP Landfill
Height 2421 mm
Weights - Waste Handler
Shipping Weight - Standard 33324 kg
Blades - 8 SU Landfill
Digging Depth 574 mm
Height 2467 mm
Blades - 8SU LGP
Note (1) *Includes blade tilt cylinder.
Blades - 8A
Total Operating Weight** - With Blade and Single-Shank Ripper 40281 kg
Ground Clearance 1323 mm
Blades - 8SU LGP
Digging Depth 513 mm
Standards
Note (1) The declared dynamic operator sound pressure level is 76 dB(A) when “ISO 6396:2008” is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at...
Hydraulic Controls
Note (4) Complete system consists of pump, tank, filter, oil cooler, valves, lines, and control levers.
Blades - 8 SU Landfill
Width - Over End Bits 3931 mm
Maximum Tilt 892 mm
Blades - 8 SU LGP Landfill
Ground Clearance 1308 mm
Blades - 8SU LGP
Weight* - Without Hydraulic Controls 4703 kg
Blades - 8 SU LGP Landfill
Total Operating Weight** - With Blade and Single-Shank Ripper 37467 kg
Blades - 8U Landfill
Capacity - SAE J1265 21.2 m³
Standards
Note (5) The declared exterior sound power level is 113 dB(A) when the value is measured according to the dynamic test procedures and the conditions that are specified in “ISO 6395:2008.” The measurement was conducted at 70% of the maximum engine cooling...
Blades - 8 SU LGP Landfill
Capacity - SAE J1265 22.1 m³
Blades - 8SU LGP
Capacity - SAE J1265 9.9 m³
Blades - 8A
Weight* - Without Hydraulic Controls 5121 kg
Blades - 8SU LGP
Ground Clearance 1308 mm
Blades - 8 SU Landfill
Weight* - Without Hydraulic Controls 3569 kg
Weights
Note (1) Operating Weight – Standard: Includes hydraulic controls, blade, tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, SU-Blade, Single-Shank Ripper, 610 mm (24 in) MS shoes, and operator.
Blades - 8 SU Landfill
Capacity - SAE J1265 19.6 m³
Engine
Engine Power - 1,700 rpm - ISO 14396 268 kW
Blades - 8U Landfill
Digging Depth 567 mm
Weights
Note (3) Shipping Weight – Standard: Includes coolant, lubricants, 20% fuel, ROPS, FOPS cab, and 610 mm (24 in) MS shoes.
Blades - 8A
Note (1) *Includes blade tilt cylinder.
Weights - Waste Handler
Note (3) Shipping Weight – Standard: Includes coolant, lubricants, 20% fuel, ROPS, FOPS cab, striker box, and 610 mm (24 in) MS shoes.
Blades - 8U Landfill
Total Operating Weight** - With Blade and Single-Shank Ripper 41000 kg
Standards
Note (3) Sound Level Information for Machines in European Union Countries and in Countries that Adopt the “European Union Directives” – The information below applies to only the machine configurations that have the “CE” mark on the Product Identification...
Hydraulic Controls
Note (2) Implement Pump output measured at 1,900 rpm and 6895 kPa (1,000 psi).
Blades - 8U Landfill
Ground Clearance 1239 mm
Blades - 8 SU Landfill
Note (2) **Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.
Ground Clearance 1288 mm
Weights - Waste Handler
Shipping Weight - LGP 35367 kg
Blades - 8U Landfill
Weight* - Without Hydraulic Controls 4287 kg
Blades - 8 SU LGP Landfill
Maximum Tilt 908 mm
Engine
Engine Power - 1,700 rpm - SAE J1995 271 kW
Ripper - Multi-Shank, Adjustable Parallelogram
Note *Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel. ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.
Blades - 8U Landfill
Height 2530 mm
Blades - 8SU LGP
Height 1622 mm
Blades - 8 SU Landfill
Note (1) *Includes blade tilt cylinder.
Weights - Waste Handler
Note (1) Operating Weight – Standard: Includes hydraulic controls, blade, tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, Waste SU-Blade, striker box, 610 mm (24 in) MS shoes, and operator.
Blades - 8A
Maximum Tilt 733 mm
Weights - Waste Handler
Note (2) Operating Weight – LGP: Includes hydraulic controls, blade, tilt cylinder, drawbar, coolant, lubricants, 100% fuel, ROPS, FOPS cab, Waste SU-Blade, 965 mm (38 in) MS shoes, striker box, and operator.
Standards
Note (4) The declared dynamic operator sound pressure level is 75 dB(A) when “ISO 6396:2008” is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at...
Blades - 8 SU LGP Landfill
Weight* - Without Hydraulic Controls 3508 kg
Blades - 8U Landfill
Width - Over End Bits 4251 mm
Blades - 8SU LGP
Note (2) **Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.
Width - Over End Bits 4531 mm
Weights - Waste Handler
Note (4) Shipping Weight – LGP: Includes coolant, lubricants, 20% fuel, ROPS, FOPS cab, striker box, and 965 mm (38 in) MS shoes.
Engine
Net Power - 1,900 rpm - ISO 9249/SAE J1349 (DIN) 359 kW
Blades - 8SU LGP
Maximum Tilt 908 mm
Ripper - Multi-Shank, Adjustable Parallelogram
Total Operating Weight* - With SU-Blade and Ripper 39409 kg
Engine
Engine Power - 1,700 rpm - ISO 14396 (DIN) 268 kW
Note (1) Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler, and alternator.
Weights
Note (4) Shipping Weight – LGP: Includes coolant, lubricants, 20% fuel, ROPS, FOPS cab, and 965 mm (38 in) MS shoes.
Note (2) Operating Weight – LGP: Includes hydraulic controls, blade, tilt cylinder, drawbar, coolant, lubricants, 100% fuel, ROPS, FOPS cab, SU-Blade, 965 mm (38 in) MS shoes, and operator.
Blades - 8SU LGP
Total Operating Weight** - With Blade and Single-Shank Ripper 36950 kg
Standards
Note (2) Hearing protection may be needed when the machine is operated with an open operator station for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or...
Blades - 8U Landfill
Note (1) *Includes blade tilt cylinder.
Blades - 8 SU LGP Landfill
Note (2) **Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.
Hydraulic Controls
Note (1) Steering Pump output measured at 2,364 rpm (pump speed) and 30 000 kPa (4,351 psi).
Blades - 8 SU LGP Landfill
Note (1) *Includes blade tilt cylinder.
Blades - 8U Landfill
Note (2) **Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.
Engine
Engine Power - 1,600 rpm - ISO 14396 294 kW
Blades
8SU - Capacity - SAE J1265 10.3 m³
8SU - Width - Over End Bits 4042 mm
8U - Capacity - SAE J1265 11.8 m³
8U - Width - Over End Bits 4265 mm
8A - Capacity - SAE J1265 5.2 m³
8A - Width - Over End Bits 5043 mm
8SU LGP - Capacity - SAE J1265 9.9 m³
8SU LGP - Width - Over End Bits 4543 mm
Transmission
1.0 Forward 3.5 km/h
2.0 Forward 6.6 km/h
3.0 Forward 11.3 km/h
2.0 Reverse 6.4 km/h
3.0 Reverse 11.8 km/h
1 Forward - Drawbar Pull 659.2 kN
2 Forward - Drawbar Pull 366.1 kN
3 Forward - Drawbar Pull 205.8 kN
Dimensions - Standard
Width - Tractor - Without Trunnions - Standard Shoes 2693 mm
Machine Height - ROPS/FOPS Cab 3566 mm
Length - Track on Ground 3206 mm
Overall Length - Basic Tractor 4647 mm
Ground Pressure (ISO 16754) 89.6 kPa
Ground Clearance 613 mm
Dimensions - Non-Suspended
Width - Tractor - Without Trunnions - Standard Shoes 2693 mm
Machine Height - ROPS/FOPS Cab 3575 mm
Length - Track on Ground 3258 mm
Overall Length - Basic Tractor 4647 mm
Ground Pressure (ISO 16754) 89.6 kPa
Ground Clearance 606 mm
Dimensions - LGP
Width - Tractor - Without Trunnions - Standard Shoes 3302 mm
Machine Height - ROPS/FOPS Cab 3566 mm
Length - Track on Ground 3206 mm
Overall Length - Basic Tractor 4647 mm
Ground Pressure (ISO 16754) 53.3 kPa
Ground Clearance 613 mm
Dimensions
Note (1) Add the following measurements for attachments: Ripper (single shank) 1519 mm/59.8 in; Ripper (multi-shank) 1613 mm/63.5 in; Drawbar 406 mm/16.0 in; SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; A Blade (not angled) 2027 mm/79.8 in; A Blade ...
Note (2) When Cat Grade Control 3D antennas are installed, overall machine height increases by approximately 82 mm/3.2 in.
Doriti un sfat sau o recomandare?

Contactati-ne acum!

Sunati-ne
+40747185657
CONTACTATI-NE

STIRI SI NOUTATI