Algeria 
Belgium 
France 
Luxembourg 
Poland 
Buldozere de talie mica Cat D3
Noul buldozer Cat® D3 vine cu performante de top si cea mai larga oferta de tehnologii, pentru a va permite sa obtineti maximum de la utilajul dvs. Foarte agil si receptiv, se remarca prin puterea cu care impinge, dar si prin finetea cu care executa lucrarile de nivelare. Transmisia hidrostatica ii asigura o accelerare fina, pentru a putea finaliza lucrarile mai rapid. Sistemul cu senzor de sarcina optimizeaza automat viteza la sol in functie de sarcina lamei, pentru o productivitate optima si cel mai bun consum de combustibil.
Utilaj nou, second-hand sau de inchiriat, dumneavoastra alegeti!
TREN DE RULARE REZISTENT
- Trenul de rulare de pe noul buldozer de clasa mica D3 este disponibil in versiunea SALT (Sealed and Lubricated Track), cu componente etansate si lubrifiate, sau Abrasion (cu rezisteta mare la abraziune), pentru o adaptare mai buna in functie de tipul de aplicatie. De asemenea, are o durata de exploatare mai lunga, pentru timpi de nefunctionare redusi. Constructia dintr-o singura bucata a cadrului principal/cadrului rolelor de sustinere a senilei si transmisia planetara cu reductie dubla ajuta utilajul sa faca fata sarcinilor grele.
O ECONOMIE DE COMBUSTIBIL DE PANA LA 10%
- Noul buldozer D3 vine cu cel mai mic consum de combustibil din aceasta clasa de dimensiuni, pastrandu-si insa performantele ridicate pe care operatorii le asteapta de la el. O imbunatatire de pana la 20% a consumului este posibila in modul de operare ECO, fara insa a afecta in vreun fel performantele utilajului.
TEHNOLOGII CAT GRADE
- Sistemele Cat Grade Control - 2D si 3D permit utilizarea tehnologiilor Slope Assist, Stable Blade si Slope Indicate pentru o operare mai usoara si mai eficienta, oferind flexibilitate in adaptarea diferitelor tehnologii la cerintele de santier.
DISPLAY MAI MARE, CU CAMERA VIDEO
- Noul display color de 254 mm, cu functii tactile, este usor de utilizat, permite o navigare excelenta prin meniul de setari al utilajului si afiseaza imaginile camerei retrovizoare si parametrii functiilor Slope Indicate / Slope Assist. Camera retrovizoare cu unghi mare de deschidere ii ofera operatorului o vedere mai buna pe santier.
CONFORT PENTRU OPERATOR
- Cabina spatioasa include caracteristici de confort precum scaun incalzit si ventilat optional si joystick de comanda incalzit, care sa ii asigure operatorului cele mai bune conditii de lucru, indiferent de mediul exterior. Inaltimea scaunului si cotierele pot fi usor reglate in functie de preferintele operatorului.
VIZIBILITATE IMBUNATATITA
- Liniile noii capote a motorului asigura o vizibilitate mai buna in fata lamei si imprejurul utilajului, in general. Asta pentru ca o vizibilitate mai buna inseamna un grad mai mic de oboseala pentru operator si o incredere mai mare in actiunile si deciziile pe care ia pe santier.
Specificatii tehnice
SPECIFICATII TEHNICE
| Engine | |
|---|---|
| Engine Model | Cat® C3.6 |
| Power - Net | 77.6 kW |
| Displacement | 3.6 l |
| Net Power - 2,200 rpm - SAE J1349 | 77.6 kW |
| Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 | 77.6 kW |
| Note (1) | Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator. |
| Engine | |
| Power Train | Hydrostatic |
| Engine | |
| Note (2) | All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. |
| Weights | |
| Operating Weight | 9362 kg |
| Weights | |
| Operating Weight - LGP | 9693 kg |
| Operating Weight - LGP, 762 mm/30 in | 9893 kg |
| Note (2) | For machine with ripper, add 554 kg (1,222 lb). |
| Note (1) | Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank. |
| Cab | |
| ROPS | ISO 3471:2008 |
| FOPS | ISO 3449:2005 Level II |
| Transmission | |
| Drive Pumps | 1 |
| Maximum Travel Speed - Forward | 9 km/h |
| Maximum Travel Speed - Reverse | 10 km/h |
| Track Motors | 2 |
| Relief Valve Settings | 48500 kPa |
| Undercarriage | |
| Shoe Width - Standard | 510 mm |
| Ground Pressure - LGP | 31.2 kPa |
| Track Gauge - LGP | 1750 mm |
| Length - Track on Ground - LGP | 2310 mm |
| Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage | 40 |
| Ground Pressure - LGP, 762 mm (30 in) | 27.2 kPa |
| Length - Track on Ground - LGP, 762 mm (30 in) | 2310 mm |
| Shoe Width - LGP | 660 mm |
| Shoe Width - LGP, 762 mm (30 in) | 762 mm |
| Track Gauge | 1600 mm |
| Number of Rollers - Each Side | 7 |
| Track Gauge - LGP, 762 mm (30 in) | 1860 mm |
| Undercarriage | |
| Ground Pressure | 38.9 kPa |
| Length of Track on Ground | 2310 mm |
| Number of Shoes - Each Side - Abrasion Undercarriage | 36 |
| Service Refill Capacities | |
| Cooling System | 19 l |
| Final Drive - Each - LGP | 10 l |
| Crankcase - With Filter | 10.5 l |
| Diesel Exhaust Fluid (DEF) Tank | 19 l |
| Transmission - Hydraulic Tank | 90 l |
| Fuel Tank | 195 l |
| Service Refill Capacities | |
| Final Drives - Each Side | 10 l |
| Hydraulic Controls | |
| Pump Output | 65 l/min |
| Relief Valve Settings | 20600 kPa |
| Ripper | |
| Type | Parallelogram |
| Number of Shanks | 3 |
| Height | 165 mm |
| Weight | 554 kg |
| Maximum Digging Depth | 337.5 mm |
| Maximum Reach - Ground Line | 766 mm |
| Overall Width | 1710 mm |
| Maximum Ground Clearance Under Tip | 448 mm |
| Winch | |
| Weight | 610 kg |
| Winch Drive | Hydrostatic |
| Control | Hydraulic |
| Speed | Variable |
| Maximum Line Pull - Full Drum | 11340 kg |
| Throat Clearance | 171.5 mm |
| Rope Diameter - Recommended | 16 mm |
| Overall Width | 741 mm |
| Maximum Line Speed - Full Drum | 63 m/min |
| Rope Diameter - Optional | 19 mm |
| Maximum Line Pull - Bare Drum | 18144 kg |
| Drum Capacity - Optional Cable | 78 m |
| Winch Length | 705 mm |
| Drum Width | 274 mm |
| Maximum Line Speed - Bare Drum | 40 m/min |
| Drum Capacity - Recommended Cable | 113 m |
| Drum Diameter | 254 mm |
| Air Conditioning System | |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
| Dimensions | |
| Width - Tractor - Standard Shoes - No Blade - LGP | 2360 mm |
| BLADE: Blade Width - LGP | 3220 mm |
| BLADE: Maximum Tilt - Intermediate | 448 mm |
| Track Gauge - LGP, 762 mm (30 in) | 1860 mm |
| BLADE: Digging Depth - LGP | 572 mm |
| Track Gauge - LGP | 1750 mm |
| BLADE: Blade Capacity (SAE) - LGP | 2.34 m³ |
| BLADE: Blade Width - Intermediate | 2921 mm |
| Width - Tractor - Standard Shoes - No Blade - LGP (762 mm/30 in) | 2630 mm |
| BLADE: Blade Lift Height - Intermediate | 767 mm |
| Length - Basic Tractor - Without Blade - LGP | 3270 mm |
| BLADE: Blade Width at Maximum Angle - LGP | 2940 mm |
| Tractor Height - LGP | 2769 mm |
| BLADE: Blade Cutting Edge Angle, Adjustable - LGP | 52° to 58° |
| Ground Clearance - LGP, 762 mm (30 in) | 332 mm |
| BLADE: Digging Depth - Intermediate | 572 mm |
| BLADE: Blade Height - LGP | 1010 mm |
| Length - Basic Tractor - Without Blade - LGP, 762 mm (30 in) | 3270 mm |
| BLADE: Blade Lift Height - LGP | 767 mm |
| BLADE: Blade Cutting Edge Angle, Adjustable - Intermediate | 52° to 58° |
| Ground Clearance - LGP | 332 mm |
| Overall Length - With Blade - LGP, 762 mm (30 in) | 4309 mm |
| BLADE: Blade Height - Intermediate | 1010 mm |
| BLADE: Blade Width at Maximum Angle - Intermediate | 2669 mm |
| BLADE: Blade Capacity (SAE) - Intermediate | 2.09 m³ |
| Overall Length - With Blade - LGP | 4309 mm |
| BLADE: Maximum Angle (either side) - Intermediate | 25° |
| BLADE: Maximum Tilt - LGP | 448 mm |
| Tractor Height - LGP, 762 mm (30 in) | 2769 mm |
| BLADE: Maximum Angle (either side) - LGP | 25° |
| Dimensions | |
| Length - Basic Tractor - Without Blade - Standard | 3270 mm |
| BLADE: Blade Capacity (SAE) - Standard | 2.19 m³ |
| Track Gauge - Standard | 1600 mm |
| Width - Tractor - Standard Shoes - No Blade - Standard | 2110 mm |
| BLADE: Digging Depth - Standard | 586 mm |
| BLADE: Blade Lift Height - Standard | 767 mm |
| Tractor Height - Standard | 2769 mm |
| Ground Clearance - Standard | 332 mm |
| Overall Length - With Blade - Standard | 4337 mm |
| BLADE: Blade Cutting Edge Angle, Adjustable - Standard | 52° to 58° |
| BLADE: Blade Height - Standard | 1073 mm |
| BLADE: Maximum Tilt - Standard | 402 mm |
| Note | Abrasion Undercarriage |
| BLADE: Blade Width - Standard | 2782 mm |
| BLADE: Blade Width at Maximum Angle - Standard | 2636 mm |
| BLADE: Maximum Angle (either side) - Standard | 25° |
Doriti un sfat sau o recomandare?
Contactati-ne acum!
Sunati-ne
+40747185657
