Buldozere de talie mica Cat D5K2 Tier 4 Final/Stage IV

Controlul tractiunii, inclinarea longitudinala si controlul optimizat al lamei imbunatatesc productivitatea, precizia si eficienta utilajelor K2. Cabina spatioasa ofera o zona de lucru confortabila. Comenzile intuitive montate pe scaun sunt usor de utilizat pentru o mai mare precizie si eficienta. Toate cele trei modele respecta normele de emisii EPATier 4 Final pentru SUA/Nivel IV pentru UE. De la prima taietura pana la finisarea de precizie, Familia de buldozere K2 impune ritmul.

Utilaj nou, second-hand sau de inchiriat, dumneavoastra alegeti!

Optiuni pentru orice aplicatie

Familia de buldozere de talie mica ofera o varietate de senile si trenuri de rulare.

Trenurile de rulare sunt disponibile in doua configuratii:

• Senile XL - flotatia si stabilitatea laterala nu reprezinta cerinte esentiale
• Senile LGP - in conditii de sol moale, pentru care este necesar un nivel superior de flotatie.

Caterpillar ofera doua senile:

• Senila etansa si lubrifiata (SALT)
– Senila nu este limitata de bucse
– Necesita rotirea bucselor si a bolturilor

• Senila SystemOne™
– Senila este limitata de bucse
– Bucsa se roteste continuu
– Nu necesita rotirea bucselor
– Proiectate pentru o durata de viata sporita a tuturor componentelor senilei

Nivelati cu usurinta si precizie

Buldozerul D5K2 are numeroase functii de control al pantei care permit operatorilor sa niveleze cu o precizie crescuta. Functii precum Cat® GRADE cu 3D, Cat GRADE cu SlopeAssist, AccuGrade si Slope Indicate permit o nivelare uniforma de fiecare data, indiferent de nivelul de experienta al operatorilor.

Service si intretinere usoare

Intervalele lungi de service si intretinerea usoara mentin utilajul in functiune pentru a reduce costurile de detinere si exploatare.
• Usa mare, cu balamale, pe partea stanga a compartimentului motorului, pentru acces facil la toate punctele de intretinere ale motorului
• Guri de evacuare grupate pentru testarea si diagnosticarea rapida a sistemului hidraulic
• Acces facil de la nivelul solului la filtrele hidraulice situate in compartimentul de service din spate stanga

Confort pentru intreaga zi

Cabina spatioasa si confortabila va ajuta sa fiti relaxat si productiv pe tot parcursul zilei.
• Mediu linistit
• Deschideri largi ale usilor pentru acces usor
• Orificii de ventilatie pe plansa de bord pentru o mai buna circulatie a aerului
• Scaun cu suspensie pneumatica pentru mai mult confort
• Aer conditionat pentru confort sporit, indiferent de anotimp
• Scaun, ventilat (optional)
• Scaun incalzit si manere incalzite (optional)

Specificatii tehnice

SPECIFICATII TEHNICE

Engine
Engine Model Cat C4.4
Power - Net 77.6 kW
Displacement 4.4 l
Bore 105 mm
Stroke 127 mm
Rated Net Power - 2,200 rpm - SAE J1349 77.6 kW
Note Engine meets U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final) emission standards.
Rated Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 77.6 kW
Transmission
Drive Pumps 1
Maximum Travel Speed - Forward 9 km/h
Relief Valve Settings 48500 kPa
Maximum Travel Speed - Reverse 10 km/h
Track Motors 2
Weights
Operating Weight - XL 9214 kg
Operating Weight - LGP 9522 kg
Service Refill Capacities
Fuel Tank 195 l
Crankcase - With Filter 11 l
Final Drive - Each - XL 10 l
Cooling System 22.4 l
Final Drive - Each - LGP 10 l
Transmission - Hydraulic Tank 59.5 l
Hydraulic Controls
Pump Output 68 l/min
Relief Valve Settings 20600 kPa
Undercarriage
Track Gauge - LGP, 762 mm (30 in) 1860 mm
Length - Track on Ground - XL 2310 mm
Length - Track on Ground - LGP 2310 mm
Shoe Width - LGP 660 mm
Ground Pressure - XL 38.6 kPa
Shoe Width - LGP, 762 mm (30 in) 762 mm
Ground Contact Area - LGP 30492 cm²
Shoe Width - XL 510 mm
Ground Contact Area - XL 23562 cm²
Ground Pressure - LGP 31.1 kPa
Track Gauge - LGP 1750 mm
Ground Contact Area - LGP, 762 mm (30 in) 35574 cm²
Ground Pressure - LGP, 762 mm (30 in) 27.1 kPa
Track Gauge - XL 1600 mm
Ripper
Type Parallelogram
Number of Shanks 3
Height 165 mm
Weight 554 kg
Overall Width 1710 mm
Maximum Reach - Ground Line 555 mm
Maximum Digging Depth 337.5 mm
Maximum Ground Clearance Under Tip 448 mm
Winch
Weight 610 kg
Winch Drive Hydrostatic
Control Hydraulic
Speed Variable
Drum Capacity - Optional Cable 78 m
Winch Length 705 mm
Maximum Line Pull - Bare Drum 18144 kg
Throat Clearance 171.5 mm
Maximum Line Speed - Bare Drum 40 m/min
Rope Diameter - Recommended 16 mm
Drum Diameter 254 mm
Overall Width 741 mm
Rope Diameter - Optional 19 mm
Maximum Line Speed - Full Drum 63 m/min
Maximum Line Pull - Full Drum 11340 kg
Drum Capacity - Recommended Cable 113 m
Drum Width 274 mm
Weights
Note Specs are for machine equipped with dozer blade, canopy ROPS, back-up alarm, operator, coolant, lubricants and full fuel tank.
Cab
FOPS ISO 3449:2005 Level II
Dimensions
Ground Clearance - XL 332 mm
BLADE: Blade Width at Maximum Angle - Intermediate 2669 mm
Undercarriage
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage 40
Dimensions
Width - Tractor - Standard Shoes - No Blade - LGP (770 mm/30 in) 2630 mm
BLADE: Blade Capacity (SAE) - Intermediate 2.09 m³
BLADE: Blade Width at Maximum Angle - LGP 2940 mm
Width - Tractor - Standard Shoes - No Blade - XL 2110 mm
BLADE: Blade Height - Intermediate 1010 mm
Tractor Height - LGP 2769 mm
Undercarriage
Length - Track on Ground - LGP, 762 mm (30 in) 2310 mm
Dimensions
Ground Clearance - LGP, 770 mm (30 in) Shoes 332 mm
BLADE: Blade Capacity (SAE) - LGP 2.34 m³
BLADE: Blade Lift Height - XL 767 mm
Overall Length - With Blade - LGP 4309 mm
Track Gauge - LGP 1750 mm
BLADE: Blade Capacity (SAE) - XL 2.19 m³
BLADE: Digging Depth - XL 586 mm
Track Gauge - LGP, 770 mm (30 in) 1860 mm
Cab
Sound Levels - SAE J1166 FEB2008 79 dB(A)
Undercarriage
Number of Shoes - Each Side - SystemOne Undercarriage 36
Dimensions
BLADE: Blade Width at Maximum Angle - XL 2636 mm
BLADE: Digging Depth - Intermediate 572 mm
Width - Tractor - Standard Shoes - No Blade - LGP 2410 mm
Service Refill Capacities
Diesel Exhaust Fluid (DEF) Tank 19 l
Dimensions
BLADE: Blade Width - XL 2782 mm
Overall Length - With Blade - LGP, 770 mm (30 in) Shoes 4309 mm
BLADE: Blade Lift Height - Intermediate 767 mm
Cab
Sound Levels - ISO 6396:2008 79 dB(A)
Dimensions
Tractor Height - LGP, 770 mm (30 in) 2769 mm
BLADE: Maximum Tilt - XL 402 mm
BLADE: Digging Depth - LGP 572 mm
Length - Basic Tractor - Without Blade - LGP 3265 mm
Cab
ROPS ISO 6396:2008
Dimensions
BLADE: Blade Height - LGP 1010 mm
Tractor Height - XL 2769 mm
BLADE: Maximum Tilt - LGP 448 mm
BLADE: Blade Cutting Edge Angle, Adjustable - XL 52° to 58°
Track Gauge - XL 1600 mm
Undercarriage
Number of Rollers - Each Side 7
Dimensions
Length - Basic Tractor - Without Blade - LGP, 770 mm (30 in) Shoes 3265 mm
Ground Clearance - LGP 332 mm
BLADE: Blade Lift Height - LGP 767 mm
BLADE: Blade Width - Intermediate 2921 mm
Length - Basic Tractor - Without Blade - XL 3265 mm
BLADE: Blade Height - XL 1073 mm
BLADE: Maximum Angle (either side) - LGP 25°
Overall Length - With Blade - XL 4309 mm
Weights
Operating Weight - LGP, 762 mm/30 in 9726 kg
Dimensions
BLADE: Blade Cutting Edge Angle, Adjustable - LGP 52° to 58°
BLADE: Maximum Tilt - Intermediate 448 mm
BLADE: Maximum Angle (either side) - Intermediate 25°
BLADE: Maximum Angle (either side) - XL 25°
BLADE: Blade Width - LGP 3220 mm
BLADE: Blade Cutting Edge Angle, Adjustable - Intermediate 52° to 58°
Doriti un sfat sau o recomandare?

Contactati-ne acum!

Sunati-ne
+40747185657
CONTACTATI-NE

STIRI SI NOUTATI