Camioane articulate Cat® 725

Modelul Cat® 725 este echipat cu o cabina cu design de talie mondiala, reproiectata pe baza informatiilor primite de la operatori din toata lumea pentru a spori confortul si usurinta de exploatare. Imbunatatirile includ comenzi noi, functii de protectie a transmisiei, sistemul de asistare cu troliu, sistemul avansat de control automat al tractiunii, controlul automat al retarderului, sistemul de avertizare a rasturnarii cu asistenta de stabilitate si modul Eco, pentru optimizarea consumului de carburant.

Utilaj nou, second-hand sau de inchiriat, dumneavoastra alegeti!

Specificatii tehnice


Engine Model Cat C9.3
Bore 115 mm
Stroke 1149 mm
Displacement 9.3 l
Peak Engine Torque Gross (SAE J1995) 1729 N·m
Gross Power - SAE J1995 255 kW
Net Power - ISO 14396 252 kW
Engine Model - U.S. EPA Tier 4 Final/EU Stage IV Cat® C9.3
No Engine De-rating Below 914 m
Peak Engine Torque Net (SAE J1349) 1712 N·m
Net Power - SAE J1349 249 kW
Peak Engine Torque Speed 1200 r/min
Rated Payload 24 ton (US)
Body Capacities
Heaped (SAE 2:1) 15 m³
Struck 11 m³
Tailgate Heaped SAE 2:1 15.6 m³
Tailgate Struck 11.1 m³
Forward - 1 8.1 km/h
Forward - 2 15.2 km/h
Forward - 3 23.2 km/h
Forward - 4 35.5 km/h
Forward - 5 49.4 km/h
Forward - 6 58.4 km/h
Reverse - 1 8.9 km/h
Operating Weights
Total - Loaded 47122 kg
Rear Axle - Rated Load 10750 kg
Total - Empty 23122 kg
Total - Rated Load 24000 kg
Center Axle - Loaded 15397 kg
Front Axle - Rated Load 2500 kg
Center Axle - Rated Load 10750 kg
Center Axle - Empty 4646 kg
Rear Axle - Loaded 15176 kg
Front Axle - Loaded 16549 kg
Rear Axle - Empty 4426 kg
Front Axle - Empty 14050 kg
Body Plate Thickness
Side Plates 11 mm
Front Plate 7 mm
Service Refill Capacities
Fuel Tank 412 l
Cooling System 83 l
Hydraulic System 110 l
Engine Crankcase 38 l
Transmission 47 l
Final Drives/Differential 125 l
Output Transfer Gear Box 24 l
DEF Tank 20 l
Body Hoist
Raise Time 10 s
Lower Time 8 s
Lock to Lock 4.75 seconds @ 60 rpm
Brakes ISO 3450 – 2011
Cab - FOPS ISO 3449 Level II – 2008
Cab - ROPS ISO 3471 – 2008
Steering ISO 5010 – 2007
Body Plate
Type High strength Brinell HB450 wear resistant steel
Turning Circle
Turning Dimensions - Inside Radius 3879 mm
Turning Dimensions - Aisle Width 5332 mm
Turning Dimensions - SAE Turning Radius 7470 mm
Turning Dimensions - Clearance Radius 8075 mm
Turning Dimensions - Steer Angle - Left/Right 45°
Note Dimensions are for machines equipped with 23.5R25 tires.
Optimal Loader/Truck Pass Matching
Wheel Loader: 950M - Passes 5
Wheel Loader: 962M - Passes 4-5
Wheel Loaders: 966M/966M XE - Passes 4
Hydraulic Excavators: 336F/336F XE - Passes 5-6
Wheel Loaders: 972M/972M XE - Passes 3-4
Hydraulic Excavators: 349F/349F XE - Passes 4-5
Note (1) The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard.
Emissions The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards.
Note (3) Net power when the fan is at maximum speed is 249 kW (334 hp) per the SAE reference conditions.
Note (2) The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Sound Levels
Note (1) The declared dynamic operator sound pressure level is 69±2 dB(A) when "ISO 6396:2008" is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum cooling fans speed. The sound level may vary at different...
Note (2) Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Note (4) DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API...
Service Refill Capacities
Final Drive - Each 7.5 l
Doriti un sfat sau o recomandare?

Contactati-ne acum!