Camioane articulate Cat® 730 EJ

Modelul Cat® 730 EJ este echipat cu o cabina cu design de talie mondiala, reproiectata pe baza informatiilor primite de la operatori din toata lumea pentru a spori confortul si usurinta de exploatare. Imbunatatirile includ comenzi noi, functii de protectie a transmisiei, sistemul de asistare cu troliu, sistemul avansat de control automat al tractiunii, sistemul de avertizare a rasturnarii cu asistenta de stabilitate si modul Eco, pentru optimizarea consumului de carburant.

Utilaj nou, second-hand sau de inchiriat, dumneavoastra alegeti!

Specificatii tehnice

SPECIFICATII TEHNICE

Engine
Engine Model Cat® C13
Bore 130 mm
Stroke 157 mm
Displacement 12.5 l
No Engine De-rating Below 3810 m
Engine Model - U.S. EPA Tier 4 Final/EU Stage V Cat C13
Peak Engine Torque Speed 1200 r/min
Net Power - SAE J1349 274 kW
Gross Power - SAE J1995 280 kW
Peak Engine Torque Gross (SAE J1995) 2141 N·m
Net Power - ISO 14396 276 kW
Weights
Rated Payload 27.1 t
Body Capacities
Heaped (SAE 2:1) 16.9 m³
Struck 13.5 m³
Transmission
Forward - 1 8 km/h
Forward - 2 15 km/h
Forward - 3 22 km/h
Forward - 4 34 km/h
Forward - 5 47 km/h
Forward - 6 55 km/h
Reverse - 1 9 km/h
Sound Levels
Interior Cab 72 dB(A)
Operating Weights
Front Axle - Rated Load 650 kg
Total - Loaded 53310 kg
Center Axle - Loaded 18825 kg
Rear Axle - Empty 5310 kg
Rear Axle - Rated Load 13225 kg
Front Axle - Loaded 15880 kg
Center Axle - Empty 5540 kg
Total - Rated Load 27100 kg
Front Axle - Empty 15750 kg
Total - Empty 26600 kg
Rear Axle - Loaded 18605 kg
Center Axle - Rated Load 13225 kg
Service Refill Capacities
Fuel Tank 412 l
Cooling System 83 l
Hydraulic System 110 l
Engine Crankcase 38 l
Transmission 47 l
Final Drives/Differential 125 l
Output Transfer Gear Box 24 l
DEF Tank 20 l
Steering
Lock to Lock 4.75 seconds @ 60 rpm
Standards
Brakes ISO 3450 – 2011
Cab - FOPS ISO 3449 Level II – 2005
Cab - ROPS ISO 3471 – 2008
Steering ISO 5010 – 2007
Body Plate
Type High strength Brinell HB450 wear resistant steel
Turning Circle
Turning Dimensions - Clearance Radius 8075 mm
Turning Dimensions - SAE Turning Radius 7470 mm
Turning Dimensions - Steer Angle - Left/Right 45°
Turning Dimensions - Inside Radius 3849 mm
Turning Dimensions - Aisle Width 5424 mm
Note Dimensions are for machines equipped with 750/65 R25 tires.
Engine
Emissions The 730 EJ meets Tier 4 Final and Stage V emission standards.
Note (4) Net power when the fan is at maximum speed is 274 kW (367 hp) per the SAE reference conditions.
Note (3) The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Note (2) The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
Sound Levels
Note (2) Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Note (1) The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested...
Engine
Note (1) The references to Tier 4 Final/Stage V include U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards.
Note (5) DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API...
Optimal Loader/Truck Pass Matching
Hydraulic Excavators: 336F/336F XE - Passes 5–6
Engine
Peak Engine Torque Net (ISO 14396) 2120 N·m
Eject/Retract Times
Retract Time 15 s
Eject Time 12 s
Optimal Loader/Truck Pass Matching
Note An optimum system match gives you a major productivity advantage. The 730 EJ is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in...
Hydraulic Excavators: 349F/349F XE - Passes 4–5
Wheel Loaders: 966M/966M XE - Passes 4
Wheel Loaders: 972M/972M XE - Passes 3–4
Wheel Loader: 962M - Passes 4–5
Wheel Loader: 950M - Passes 5
Doriti un sfat sau o recomandare?

Contactati-ne acum!

Sunati-ne
+40747185657
CONTACTATI-NE