Camioane articulate Cat® 735

Modelul Cat® 735 este echipat cu o cabina cu design de top, reproiectata pe baza informatiilor primite de la operatori din toata lumea pentru a spori confortul si usurinta de exploatare. Imbunatatirile includ comenzi noi, functii de protectie a transmisiei, sistemul de asistare cu troliu, sistemul avansat de control automat al tractiunii, sistemul de avertizare a rasturnarii cu asistenta de stabilitate si modul Eco, pentru optimizarea consumului de carburant.

Utilaj nou, second-hand sau de inchiriat, dumneavoastra alegeti!

Specificatii tehnice


Engine Model Cat® C13
Bore 130 mm
Stroke 157 mm
Displacement 12.5 l
Peak Engine Torque Net (SAE J1349) 2165 N·m
Peak Engine Torque Speed 1200 r/min
Net Power - SAE J1349 316 kW
Emissions The 735 meets Tier 4 Final and Stage V emission standards.
Peak Engine Torque Gross (SAE J1995) 2188 N·m
Note (3) The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
No Engine De-rating Below 3810 m
Note (2) The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
Net Power - ISO 14396 320 kW
Gross Power - SAE J1995 324 kW
Note (5) DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API...
Note (4) Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions.
Note (1) The references to Tier 4 Final/Stage V include U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards.
Engine Model - U.S. EPA Tier 4 Final/EU Stage V Cat C13
Rated Payload 32 t
Body Capacities
Heaped (SAE 2:1) 20 m³
Struck 15.5 m³
Tailgate Heaped SAE 2:1 21.3 m³
Tailgate Struck 16.3 m³
Forward - 1 8 km/h
Forward - 2 15 km/h
Forward - 3 23 km/h
Forward - 4 35 km/h
Forward - 5 48 km/h
Forward - 6 57 km/h
Reverse - 1 9 km/h
Sound Levels
Interior Cab 72 dB(A)
Operating Weights
Total - Loaded 57240 kg
Front Axle - Empty 15480 kg
Total - Rated Load 32000 kg
Rear Axle - Loaded 18720 kg
Rear Axle - Empty 4770 kg
Center Axle - Empty 4990 kg
Center Axle - Rated Load 13950 kg
Front Axle - Loaded 19580 kg
Total - Empty 25240 kg
Front Axle - Rated Load 4100 kg
Rear Axle - Rated Load 13950 kg
Center Axle - Loaded 18940 kg
Service Refill Capacities
Fuel Tank 412 l
Cooling System 83 l
Hydraulic System 110 l
Engine Crankcase 38 l
Transmission 56 l
Final Drives/Differential 125 l
Output Transfer Gear Box 25 l
DEF Tank 20 l
Body Hoist
Raise Time 12 s
Lower Time 11 s
Lock to Lock 4.75 seconds @ 60 rpm
Brakes ISO 3450 – 2011
Cab - FOPS ISO 3449 Level II – 2005
Cab - ROPS ISO 3471 – 2008
Steering ISO 5010 – 2007
Body Plate
Type High strength Brinell HB450 wear resistant steel
Turning Circle
Turning Dimensions - SAE Turning Radius 7470 mm
Turning Dimensions - Inside Radius 3793 mm
Turning Dimensions - Clearance Radius 8075 mm
Note Dimensions are for machines equipped with 750/65 R25 tires.
Turning Dimensions - Steer Angle - Left/Right 45°
Turning Dimensions - Aisle Width 5393 mm
Sound Levels
Note (2) Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Note (1) The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested...
Optimal Loader/Truck Pass Matching
Hydraulic Excavators: 336F/336F XE - Passes 5–6
Note An optimum system match gives you a major productivity advantage. The 735 is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in...
Body Plate Thickness
Base Plate 13 mm
Optimal Loader/Truck Pass Matching
Hydraulic Excavators: 349F/349F XE - Passes 4–5
Wheel Loaders: 972M/972M XE - Passes 3–4
Body Plate Thickness
Front Plate 7 mm
Optimal Loader/Truck Pass Matching
Wheel Loader: 962M - Passes 4–5
Wheel Loader: 950M - Passes 5
Body Plate Thickness
Side Plates 11 mm
Optimal Loader/Truck Pass Matching
Wheel Loaders: 966M/966M XE - Passes 4
Doriti un sfat sau o recomandare?

Contactati-ne acum!