Camioane articulate Cat® 740 EJ

Modelul Cat® 740 EJ este echipat cu o cabina cu design de talie mondiala, reproiectata pe baza informatiilor primite de la operatori din toata lumea pentru a spori confortul si usurinta de exploatare. Imbunatatirile includ comenzi noi, functii de protectie a transmisiei, sistemul de asistare cu troliu, sistemul avansat de control automat al tractiunii, sistemul de avertizare a rasturnarii cu asistenta de stabilitate si modul Eco, pentru optimizarea consumului de carburant.

Utilaj nou, second-hand sau de inchiriat, dumneavoastra alegeti!

Specificatii tehnice

SPECIFICATII TEHNICE

Engine
Engine Model Cat® C18
Bore 145 mm
Stroke 183 mm
Displacement 18.1 l
Net Power - SAE J1349 370 kW
Engine Model - U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), Korea Tier 4 Final Cat C18
Net Power - ISO 14396 376 kW
Gross Power - SAE J1995 381 kW
Weights
Rated Payload 38 t
Body Capacities
Heaped (SAE 2:1) 23 m³
Struck 18 m³
Transmission
Forward - 1 6.1 km/h
Forward - 2 8.1 km/h
Forward - 3 11.2 km/h
Forward - 4 14.1 km/h
Forward - 5 18.7 km/h
Forward - 6 22.9 km/h
Forward - 7 31.5 km/h
Reverse - 1 6.4 km/h
Reverse - 2 14.6 km/h
Sound Levels
Interior Cab 72 dB(A)
Operating Weights
Front Axle - Empty 20343 kg
Front Axle - Loaded 22021 kg
Center Axle - Loaded 25952 kg
Center Axle - Empty 7754 kg
Total - Empty 35663 kg
Rear Axle - Rated Load 18198 kg
Rear Axle - Empty 7491 kg
Front Axle - Rated Load 1603 kg
Center Axle - Rated Load 18198 kg
Total - Loaded 73663 kg
Total - Rated Load 38000 kg
Rear Axle - Loaded 25690 kg
Body Plate
Type High Strength Brinell HB450 Wear Resistant Steel
Service Refill Capacities
Fuel Tank 550 l
Cooling System 90 l
Engine Crankcase 52 l
Steering/Hoist Hydraulic System 140 l
Transmission - OTG 75 l
DEF Tank 25 l
Brake Cooling Tank 67 l
Steering
Lock to Lock 4.8 seconds @ 60 rpm
Standards
Brakes ISO 3450 – 2011
Cab - FOPS ISO 3449 Level II – 2005
Cab - ROPS ISO 3471 – 2008
Steering ISO 5010 – 2007
Turning Circle
Note Dimensions are for machines equipped with 29.5R25 tires.
Turning Dimensions - Aisle Width 5925 mm
Turning Dimensions - Inside Radius 4413 mm
Turning Dimensions - Clearance Radius 9045 mm
Turning Dimensions - SAE Turning Radius 8624 mm
Turning Dimensions - Steer Angle - Left/Right 45 deg
Transmission
Forward - 8 37.9 km/h
Engine
Peak Engine Torque Net (SAE J1349) 2558 N·m
Blade Eject/Retract
Retract (manual) 21 s
Engine
No Engine De-rating Required Below 3050 m
Service Refill Capacities
Axles - Each 60 l
Transmission
Forward - 9 54.8 km/h
Body Plate
Chute 14 mm
Engine
Note (4) DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API...
Peak Engine Torque Gross (SAE J1995) 2618 N·m
Service Refill Capacities
Final Drive - Each 5 l
Optimal Loader/Truck Pass Matching
Note An optimum system match gives you a major productivity advantage. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.
Sound Levels
Note (1) The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested...
Optimal Loader/Truck Pass Matching
Wheel Loader: 972 - Passes 4–5
Body Plate
Front 7 mm
Engine
Note (1) The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard.
Body Plate
Side 11 mm
Blade Eject/Retract
Eject (manual) 17 s
Engine
Peak Engine Torque Speed 1200 r/min
Sound Levels
Note (2) Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Blade Eject/Retract
Eject (automatic) 16 s
Retract (automatic) 21 s
Optimal Loader/Truck Pass Matching
Wheel Loader: 982 - Passes 4
Engine
Note (2) The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Note (3) Net power when the fan is at maximum speed is 348 kW (467 hp) per the SAE reference conditions.
Optimal Loader/Truck Pass Matching
Hydraulic Excavator: 374 - Passes 5
Hydraulic Excavator: 390 - Passes 4
Wheel Loader: 980 - Passes 4–5
Body Plate
Base 14 mm
Engine
Emissions The 740 EJ meets Tier 4 Final and Stage V emission standards.
Doriti un sfat sau o recomandare?

Contactati-ne acum!

Sunati-ne
+40747185657
CONTACTATI-NE

STIRI SI NOUTATI