Camioane articulate Cat® 740 GC

Modelul Cat® 740 GC este echipat cu o cabina cu design de talie mondiala, reproiectata pe baza informatiilor primite de la operatori din toata lumea pentru a spori confortul si usurinta de exploatare. Imbunatatirile includ comenzi noi, functii de protectie a transmisiei, sistemul de asistare cu troliu, sistemul avansat de control automat al tractiunii, sistemul de avertizare a rasturnarii cu asistenta de stabilitate si modul Eco, pentru optimizarea consumului de carburant.

Utilaj nou, second-hand sau de inchiriat, dumneavoastra alegeti!

Specificatii tehnice

SPECIFICATII TEHNICE

Engine
Engine Model Cat® C15
Bore 137 mm
Stroke 171.5 mm
Displacement 15.2 l
No Engine De-rating Below 3050 m
Peak Engine Torque Speed 1200 r/min
Peak Engine Torque Net (SAE J1349) 2264 N·m
Net Power - SAE J1349 327 kW
Engine Model - U.S. EPA Tier 4 Final/EU Stage V Cat C15
Gross Power - SAE J1995 337 kW
Net Power - ISO 14396 333 kW
Peak Engine Torque Gross (SAE J1995) 2320 N·m
Emissions The C15 engine meets Tier 4 Final and Stage V emission standards.
Weights
Rated Payload 36.3 t
Body Capacities
Heaped (SAE 2:1) 22.7 m³
Struck 17 m³
Tailgate Heaped SAE 2:1 24.4 m³
Tailgate Struck 17.9 m³
Transmission
Forward - 1 6.4 km/h
Forward - 2 8.5 km/h
Forward - 3 11.5 km/h
Forward - 4 14.8 km/h
Forward - 5 19.7 km/h
Forward - 6 24 km/h
Reverse - 1 6.8 km/h
Reverse - 2 15.7 km/h
Forward - 8 39.8 km/h
Forward - 7 33.1 km/h
Forward - 9 57.5 km/h
Sound Levels
Interior Cab 72 dB(A)
Operating Weights
Center Axle - Empty 6639 kg
Rear Axle - Empty 6416 kg
Center Axle - Rated Load 17087 kg
Front Axle - Empty 19321 kg
Total - Empty 32376 kg
Center Axle - Loaded 23173 kg
Front Axle - Loaded 22554 kg
Total - Rated Load 36300 kg
Rear Axle - Rated Load 17087 kg
Rear Axle - Loaded 22949 kg
Front Axle - Rated Load 2126 kg
Total - Loaded 68676 kg
Service Refill Capacities
Fuel Tank 550 l
Cooling System 90 l
Engine Crankcase 52 l
Axles - Each 60 l
Brake Cooling Tank 67 l
Transmission - OTG 75 l
DEF Tank 25 l
Steering/Hoist Hydraulic System 140 l
Final Drive - Each 5 l
Body Hoist
Raise Time 12 s
Lower Time 12 s
Steering
Lock to Lock 4.75 seconds @ 60 rpm
Standards
Brakes ISO 3450 – 2011
Cab - FOPS ISO 3449 Level II – 2005
Cab - ROPS ISO 3471 – 2008
Steering ISO 5010 – 2007
Body Plate
Type High strength Brinell HB450 wear resistant steel
Turning Circle
Turning Dimensions - SAE Turning Radius 7698 mm
Turning Dimensions - Clearance Radius 8395 mm
Turning Dimensions - Aisle Width 5595 mm
Note Dimensions are for machines equipped with 29.5 R25 tires.
Turning Dimensions - Steer Angle - Left/Right 45°
Turning Dimensions - Inside Radius 3960 mm
Body Plate Thickness
Side Plates 11 mm
Sound Levels
Note (2) Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Optimal Loader/Truck Pass Matching
Note An optimum system match gives you a major productivity advantage. The 740 GC is an excellent match for the Cat 374F and 352F Hydraulic Excavators; and Cat 972M, 966M, and 962M Wheel Loaders. Having matched loading and hauling tools results in...
Body Plate Thickness
Base Plate 13 mm
Optimal Loader/Truck Pass Matching
Wheel Loader: 972M - Passes 3
Wheel Loader: 962M - Passes 5
Body Plate Thickness
Front Plate 7 mm
Engine
Note (4) Net power when the fan is at maximum speed is 327 kW (439 hp) per the SAE reference conditions.
Note (2) The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard.
Note (3) The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Sound Levels
Note (1) The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested...
Optimal Loader/Truck Pass Matching
Wheel Loader: 966M - Passes 4–5
Hydraulic Excavator: 374F - Passes 3–4
Hydraulic Excavator: 352F - Passes 5–6
Engine
Note (1) The references to Tier 4 Final/Stage V include U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards.
Note (5) DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard ISO 22241-1. Requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
Doriti un sfat sau o recomandare?

Contactati-ne acum!

Sunati-ne
+40747185657
CONTACTATI-NE