Camioane articulate Cat® 745

Modelul Cat® 745 este echipat cu o cabina cu design de top, reproiectata pe baza informatiilor primite de la operatori din toata lumea pentru a spori confortul si usurinta de exploatare. Imbunatatirile includ comenzi noi, functii de protectie a transmisiei, sistemul de asistare cu troliu, sistemul avansat de control automat al tractiunii, sistemul de avertizare a rasturnarii cu asistenta de stabilitate si modul Eco, pentru optimizarea consumului de carburant.

Utilaj nou, second-hand sau de inchiriat, dumneavoastra alegeti!

Specificatii tehnice

SPECIFICATII TEHNICE

Engine
Engine Model Cat C18
Bore 145 mm
Stroke 183 mm
Displacement 18.1 l
Net Power - ISO 14396 376 kW
Net Power - SAE J1349 370 kW
Gross Power - SAE J1995 381 kW
Engine Model - U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), Korea Tier 4 Final Cat® C18
Weights
Rated Payload 41 t
Body Capacities
Heaped (SAE 2:1) 25 m³
Struck 18.5 m³
Tailgate Heaped SAE 2:1 26.5 m³
Tailgate Struck 19.5 m³
Transmission
Forward - 1 6.1 km/h
Forward - 2 8.1 km/h
Forward - 3 11.2 km/h
Forward - 4 14.1 km/h
Forward - 5 18.7 km/h
Forward - 6 22.9 km/h
Forward - 7 31.5 km/h
Reverse - 1 6.4 km/h
Reverse - 2 14.6 km/h
Sound Levels
Interior Cab 72 dB(A)
Operating Weights
Rear Axle - Rated Load 17550 kg
Front Axle - Empty 19738 kg
Total - Loaded 74363 kg
Rear Axle - Empty 6682 kg
Rear Axle - Loaded 24232 kg
Total - Rated Load 41000 kg
Front Axle - Rated Load 5900 kg
Center Axle - Rated Load 17550 kg
Total - Empty 33363 kg
Front Axle - Loaded 25638 kg
Center Axle - Loaded 24494 kg
Center Axle - Empty 6944 kg
Body Plate
Type High Strength Brinell HB450 Wear Resistant Steel
Service Refill Capacities
Fuel Tank 550 l
Cooling System 90 l
Engine Crankcase 52 l
Steering/Hoist Hydraulic System 140 l
Transmission - OTG 75 l
DEF Tank 25 l
Brake Cooling Tank 67 l
Body Hoist
Raise (automatic) 13 s
Raise (manual) 12 s
Steering
Lock to Lock 4.8 seconds @ 60 rpm
Standards
Brakes ISO 3450 – 2011
Cab - FOPS ISO 3449 Level II – 2005
Cab - ROPS ISO 3471 – 2008
Steering ISO 5010 – 2007
Turning Circle
Turning Dimensions - Aisle Width 5917 mm
Turning Dimensions - Inside Radius 4413 mm
Turning Dimensions - Clearance Radius 9082 mm
Turning Dimensions - SAE Turning Radius 8625 mm
Note Dimensions are for machines equipped with 29.5R25 tires.
Turning Dimensions - Steer Angle - Left/Right 45 deg
Transmission
Forward - 8 37.9 km/h
Service Refill Capacities
Final Drive - Each 5 l
Body Plate
Base 14 mm
Engine
Note (4) DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API...
Note (1) The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard.
Sound Levels
Note (1) The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested...
Body Hoist
Lower (automatic) 10 s
Service Refill Capacities
Axles - Each 60 l
Engine
No Engine De-rating Required Below 3050 m
Transmission
Forward - 9 54.8 km/h
Body Plate
Chute 14 mm
Optimal Loader/Truck Pass Matching
Hydraulic Excavator: 390 - Passes 4
Engine
Note (2) The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Sound Levels
Note (2) Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Engine
Note (3) Net power when the fan is at maximum speed is 348 kW (467 hp) per the SAE reference conditions.
Peak Engine Torque Gross (SAE J1995) 2618 N·m
Body Hoist
Lower (manual) 10 s
Optimal Loader/Truck Pass Matching
Wheel Loader: 982 - Passes 4
Body Plate
Side 11 mm
Optimal Loader/Truck Pass Matching
Wheel Loader: 972 - Passes 43926
Engine
Peak Engine Torque Speed 1200 r/min
Body Plate
Front 7 mm
Engine
Peak Engine Torque Net (SAE J1349) 2558 N·m
Emissions The 745 meets Tier 4 Final and Stage V emission standards.
Optimal Loader/Truck Pass Matching
Hydraulic Excavator: 374 - Passes 5
Note An optimum system match gives you a major productivity advantage. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.
Wheel Loader: 980 - Passes 43926
Doriti un sfat sau o recomandare?

Contactati-ne acum!

Sunati-ne
+40747185657
CONTACTATI-NE

STIRI SI NOUTATI