Camioane rigide de talie mare Cat® 777G

Seria G reprezinta o noua era pentru aceasta clasa de marime de la Cat. Cu contributia dvs., am proiectat si fabricat un camion fiabil, economic si care ofera operatorilor dvs. confort, incredere si control. Obiectivul nostru este succesul dvs. pe termen lung si, cu camioanele din seria G, suntem pe drumul cel bun.

Utilaj nou, second-hand sau de inchiriat, dumneavoastra alegeti!

Specificatii tehnice

SPECIFICATII TEHNICE

Engine
Engine Model Cat® C32
Gross Power - SAE J1995 765 kW
Net Power - SAE J1349 704 kW
Net Power - ISO 9249 704 kW
Net Power - 80/1269/EEC 704 kW
Bore 146 mm
Stroke 162 mm
Displacement 32.1 l
Note (1) Power rating applies at 1,800 rpm when tested under the specified condition for the specified standard.
Note (3) No engine derating required up to 4600 m (15,000 ft) for Tier 2 Equivalent.
Net Torque 5286 N·m
Engine Power - ISO 14396 755 kW
Note (2) Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).
Cylinders 12
Peak Torque - Speed 1200 r/min
Engine Speed 1800 r/min
Weights - Approximate
Target Gross Machine Weight 164654 kg
Operating Specifications
Nominal Payload Class (100%) 90.8 t
Top Speed - Loaded 67.1 km/h
Body Capacity - SAE 2:1 64.1 m³
Note (1) Capacity with flat floor X Body with liner.
Note (2) Refer to the Caterpillar 10/10/20 Payload Policy for maximum gross vehicle weight limitations.
Maximum Working Payload (110%) 99.8 t
Maximum Allowable Payload (120%)* 109 t
Target Payload (100%) 90.8 t
Transmission
Forward - 1 10.9 km/h
Forward - 2 14.8 km/h
Forward - 3 20.1 km/h
Forward - 4 27.2 km/h
Forward - 5 36.9 km/h
Forward - 6 49.4 km/h
Forward - 7 67.1 km/h
Reverse 12.4 km/h
Note Maximum travel speeds with standard 27.00R49 (E4) tires.
Final Drives
Differential Ratio 2.736:1
Planetary Ratio 7.0:1
Total Reduction Ratio 19.1576:1
Brakes
Brake Standards ISO 3450-2011
Brake Surface Area - Front 40846 cm²
Brake Surface Area - Rear 102116 cm²
Body Hoists
Pump Flow - High Idle 458 l/min
Relief Valve Setting - Raise 18950 kPa
Relief Valve Setting - Lower 3450 kPa
Body Raise Time - High Idle 15 s
Body Lower Time - Float 13 s
Body Lower Time - High Idle 13 s
Capacity - Dual Slope - 100% Fill Factor
Struck 41.9 m³
Note (1) Contact your local Cat dealer for body recommendation.
Note (2) *ISO 6483:1980
Heaped (SAE 2:1)* 60.2 m³
Weight Distributions - Approximate
Front Axle - Empty 46 %
Front Axle - Loaded 33 %
Rear Axle - Empty 54 %
Rear Axle - Loaded 67 %
Suspension
Rear axle - Oscillation 5.4 °
Empty Loaded Cylinder Stroke Front 74.7 mm
Empty Loaded Cylinder Stroke Rear 66 mm
Service Refill Capacities
Fuel Tank (1) 1136 l
Cooling System 228 l
Steering System - Including Tank 53.6 l
Torque Converter - Transmission System 138.5 l
Differentials 227 l
Final Drive - Each 76 l
Brake Hoist System 322 l
Fuel Tank (2) 1325 l
Crankcase 109 l
Brake Hoist System - Includes Tank 444 l
Tires
Note (2) Caterpillar recommends the customer evaluate all job conditions and consult the tire manufacturer for proper tire selection.
Note (1) Productive capabilities of the 777G truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production.
Standard Tire 27.00R49 (E4)
ROPS
ROPS Standards Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria.
FOPS Standards Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria.
Sound
Sound Standards (2) The exterior sound pressure level for the standard machine measured at a distance of 15 m (49 ft) according to the test procedures specified in SAE J88:2008, mid‑gear moving operation is 84 dB(A) for Tier 2 Equivalent.
Sound Standards (3) Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.
Sound Standards (1) The operator Equivalent Sound Pressure Level (Leq) is 73 dB(A) when SAE J1166 FEB2008 is used to measure the value for an enclosed cab. This is a work cycle sound exposure level. The cab was properly installed and maintained. The test was...
Steering
Turning Diameter - Front 25.3 m
Steering Standards ISO 5010:2007
Steer Angle 30.5 °
Turning Circle - Clearance Diameter 28.4 m
Capacity - X Body - 100% Fill Factor
Struck 43.1 m³
Note (1) Contact your local Cat dealer for body recommendation.
Note (2) *ISO 6483:1980
Capacity - Coal Bodies - 100% Fill Factor
SAE 2:1 - For use with material densities of 1160 kg/m3 (1,950 lb/yd3) 89 m³
SAE 2:1 - For use with material densities less than 950 kg/m3 (1,600 lb/yd3) 126 m³
SAE 2:1 - For use with material densities of 1040-1160 kg/m3 (1,750-1,950 lb/yd3) 106 m³
SAE 2:1 - For use with material densities of 950-1040 kg/m3 (1,600-1,750 lb/yd3) 110 m³
Engine
Net Power 683 kW
Doriti un sfat sau o recomandare?

Contactati-ne acum!

Sunati-ne
+40747185657
CONTACTATI-NE

STIRI SI NOUTATI