Cilindri compactori cu doi tamburi Cat® CB54B - Split Drum

The Cat® CB54B is a 10 ton roller with 1700 mm (67") tandem vibratory drums. It excels on a variety of asphalt mix designs as well as other granular materials. It features exceptional visibility and control, smooth operating powertrain, versatile vibratory systems, Cat Compaction Control, and the industry leading water spray system.

Utilaj nou, second-hand sau de inchiriat, dumneavoastra alegeti!

Exceptional Visibility and Control

Comfortable Operating Station

The machine controls and LCD display are integrated with the pivoting adjustable seat, and move with the operator. Seating options include vinyl for open-platform configurations and cloth for cab, both can be equipped with a heated option. An optional deluxe highback air-ride seat is also available. Other comfort features include a vibration-absorbing floor mat, 12-volt power receptacle that supports communication devices, wide-width seat belt, cup holders and a lockable storage compartment.

Fingertip Control

The multi-function propel lever with integrated controls for water spray on/off, drum offset, vibratory control, and optional edge cutter height adjustment enables the operator to work with confidence.

LCD Display

The back-lit LCD display includes machine data and diagnostics. It is integrated with the seat, so it remains in same position even as the seat pivots. A built-in lockable anti-vandalism cover offers protection. The display provides multiple language options, split-screen capability, and indicators for ground speed, vibrations per minute, and fuel level.

Convenient Console

The console is integrated with the seat, providing fingertip access. Soft keys with tactile feel provide instant feedback to the operator for intuitive operation. The armrests are adjustable and can be tailored to the operator for additional comfort.

Smooth Operating Powertrain

Cat® C4.4 Engine

The C4.4 engine provides 98 kW (131 hp) of power and meets U.S. EPA Tier 4 Interim and EU Stage IIIB emission standards. It features an electronic control module (ECM), providing optimal performance through precisely synchronized timing and fuel delivery. The ECM enables advanced troubleshooting and diagnostic capabilities using Electronic Technician (Cat ET). Cat dealers are the single-source providers of all machine and engine warranty service (a Cat exclusive).

High Capacity Cooling System

The large capacity cooling system keeps the operating temperatures low, even in extreme conditions. Two high volume fans direct warm air away from the operator for a more comfortable operating environment.

Vibratory System

Split Drum Design

The exclusive split-drum design delivers excellent mat quality in urban environments when frequent turning is required. When turning, the outside drum half rotates faster than the inside drum, eliminating the potential for shoving and tearing that occurs on standard vibratory drum designs. The exclusive axle-type pod design utilizes tapered roller bearings that support each drum half and eliminates any potential for contact between the two halves.

Dual Amplitude/Dual Frequency Vibratory System

The dual amplitude, dual frequency vibratory system can be tailored to thin and thick lifts. A single switch automatically matches amplitude and frequency for simple operation.

Performance Features

The vibratory system offers multiple options that help fine-tune performance. The automatic speed control feature makes it easier to maintain consistency and impact spacing requirements. Also, an auto vibe function helps prevent over-compaction and contributes to uniformity.

Cat® Compaction Control

Temperature Sensors

Dual infra-red sensors mounted on the front and rear of the machine deliver real-time readings that keep the operator informed of when to begin rolling and when to stop. This system helps operators avoid tender-zones that often occur in the 104º-110º C (219º-230º F) temperature range.

Pass-Count Mapping

Pass-count mapping helps operators achieve target density and increase roller efficiency. The system records and monitors pass patterns in order to display coverage. The system also helps operators optimize drum overlap, simplify nighttime operation, eliminate second guessing and prevent incomplete passes such as stopping short.

Temperature Mapping

Temperature mapping provides a visual readout of mat temperature in order to keep the machine in the proper temperature range. The system records and monitors temperature for future analysis of the proper temperature range.

Specificatii tehnice

SPECIFICATII TEHNICE

Weights
Operating Weight 10670 kg
Operating Weight - At Rear Drum with ROPS/FOPS 5170 kg
Operating Weight - At Front Drum with ROPS/FOPS 5240 kg
Operating Weight - With Cab 10670 kg
Maximum Weight at Front Drum 5310 kg
Operating Weight - With ROPS/FOPS 10410 kg
Maximum Weight at Rear Drum 5360 kg
Operating Specifications
Standard Compaction Width 1700 mm
Curb Clearance 934 mm
Turning Radius - Inside Drum Edge 4378 mm
Ground Clearance 268 mm
Static Linear Load 31.2 kg/cm
Travel Speed - Maximum 12 km/h
Maximum Compaction Width 1870 mm
Engine
Gross Power 98 kW
Bore 105 mm
Stroke 127 mm
Engine Model Cat® C4.4 with ACERT Technology
Dimensions
Overall Length 4565 mm
Wheel Base 3300 mm
Height - With ROPS/FOPS 2982 mm
Compaction Width 1700 mm
Overall Width 1872 mm
Drum Diameter 1198 mm
Drum Width 1700 mm
Vibratory System
Drum Width 1700 mm
Drum Diameter 1198 mm
Frequency 53.3 Hz
Vibration Selection Independent per drum, front only, rear only, both
Eccentric Weight Drive Hydraulic direct, auto reversing
Nominal Amplitude - Low 0.33 mm
Nominal Amplitude - High 0.61 mm
Centrifugal Force per Drum - Maximum 86.7 kN
Centrifugal Force per Drum - Minimum 75.5 kN
Service Refill Capacities
Fuel Tank Capacity 208 l
Water Spray Tank Capacity 837 l
Doriti un sfat sau o recomandare?

Contactati-ne acum!

Sunati-ne
+40747185657
CONTACTATI-NE

STIRI SI NOUTATI