Compactoare de sol vibratoare Cat® CP433E

CS433E Vibratory Soil Compactor

Utilaj nou, second-hand sau de inchiriat, dumneavoastra alegeti!

Operator's Station

Based on the 500D-Series Soil Compactors operator's station, the 400E-Series Soil Compactors feature exceptional operator comfort and unmatched visibility to drum and tire edges. A tilting steering column, propel lever wrist rest, grouped control gauges and conveniently located control switches enhance operator productivity and reduce operator fatigue. Four heavy-duty isolation mounts provide a smooth ride.

Cab

The cab on the 400E-Series Soil Compactors is engineered to provide the operator unparalleled viewing area and comfort. Integrated, factory installed air conditioning is optional. The cab may be an option in some areas and standard in others. Consult your dealer for specifics.

Engine

Powered by the 75 kW (100 hp) Caterpillar® 3054C engine, the CS433E and CP433E provide exceptional performance on flat or aggressive terrain. It meets Stage II emmission regulations. The turbocharged engine maintains power in high altitudes.

Leveling Blade

An optional foot-controlled leveling blade for the CS433E and CP433E increases machine utilization to tackle backfilling, material knockdown and light dozing applications.

Dual Propel Pumps

The exclusive dual pump propel system provides a separate balanced hydraulic flow to both the rear drive axle and the front drum drive motor. This system enables the operator to achieve unmatched gradeability and maintain machine control while compacting on a grade or using the optional leveling blade. Dual pumps also minimize drum and wheel spin-out in low traction conditions.

Serviceability

The newly designed one-piece fiberglass hood tilts forward to allow access to the engine and daily maintenance points. Sealed-for-life bearings in the articulation hitch never need to be greased. Engine lubrication change interval of 500 hours. The operator's station tilts forward to provide access to the hydraulic pumps.

Padfoot Conversion Kit

An optional two-piece padfoot conversion kit (for the CS models only) expands the application range to work in either cohesive or semi-cohesive materials. Simple changing procedure minimizes your conversion time.

Vibratory System

A pod-style weight housing ensures peak vibratory performance and minimal service. The pod is replaceable and features bearing lubrication change intervals of 3 years/3000 hours.

Visibility

The one-piece sloped hood design provides exceptional operator visibility to the outside edge of the rear tires and to the rear of the machine.

Specificatii tehnice

SPECIFICATII TEHNICE

Engine
Gross Power 75 kW
Engine Model Cat 3054C
Net Power - ISO 9249 72 kW
Weights
Operating Weight - With Cab 7390 kg
Operating Weight - With ROPS/FOPS 7390 kg
Operating Weight 7390 kg
Operating Specifications
Drum Width 1600 mm²
Turning Radius - Inside Drum Edge 3050 mm²
Static Linear Load 20.3 kg
Dimensions
Overall Length 4900 mm²
Width - With Blade 2100 mm²
Overall Length - With Blade 5300 mm²
Compaction Width 1.6 m
Drum Diameter - Over Drum 1200 mm²
Overall Width 1800 mm²
Service Refill Capacities
Fuel Tank Capacity 160 l
Vibratory System
Nominal Amplitude - High 1.67 mm²
Centrifugal Force - Maximum 134 kN
Doriti un sfat sau o recomandare?

Contactati-ne acum!

Sunati-ne
+40747185657
CONTACTATI-NE

STIRI SI NOUTATI