Algeria 
Belgium 
France 
Luxembourg 
Poland 
Excavatoare de talie medie Cat® 325F L (2017)
Picture yourself behind the joysticks of one of the world's finest compact radius excavators, the Cat® 325F L. This machine features a highly efficient U.S. EPA Tier 4 Final/EU Stage IV C4.4 ACERT™ engine that's miserly on fuel paired with a state-of-the-art hydraulic system that's responsive to your every command.
Utilaj nou, second-hand sau de inchiriat, dumneavoastra alegeti!
Safety
- The roll-over protective structure (ROPS) cab is safe, comfortable, and as quiet as today's top on-road trucks.
- Handrails, anti-skid plating, and countersunk bolts reduce slipping and tripping.
- Four mirrors, a rearview and a side view camera enhance visibility to help make operators more effective and efficient.
- A full-length firewall separates the pump and engine compartments.
- A ground-level fuel cutoff switch shuts down the engine in case of emergency.
Versatility
- Compact radius helps you work in tight spaces.
- Demolition work is easy with a Cat hammer, grapple, shear, or multi-processor.
- Utility and finishing work are fast and flawless with a Cat compactor, thumb, finishing bucket or tilt bucket.
- Couplers let you swap between attachments in seconds without leaving the cab.
- See the whole attachment line for your machine at www.cat.com/attachments.
Maintenance
- Most routine service points are at ground level.
- Filters are consolidated in the pump compartment for added convenience.
- Wide service doors and a two-piece engine hood with gas cylinder assist allow for easy access.
- An electric fuel priming pump speeds up starts and fuel system maintenance.
Comfort
- The full-size roll-over protective structure (ROPS) certified cab is quiet and comfortable.
- Automatic climate control helps maintain consistent cab temperature.
- Joystick consoles and armrests are adjustable.
- Fully adjustable air suspension seat maximizes comfort levels during long periods of operation.
- The LCD monitor is easy to navigate and programmable in 44 languages.
- Standard rearview camera and right side cameras enhance visibility.
Performance
- The Cat C4.4 ACERT Tier 4 Final/Stage IV engine burns up to 22% less fuel than the Tier 3/Stage IIIA engine it replaces, and it can run on biodiesel up to B20.
- Maximum lift is 12 650 kg at 4.5 m out front at ground level – up to 8% more lift than the model it replaces.
- High-ambient cooling capability lets you work in extreme heat.
- The machine can work in altitude up to altitude capability up to 3000 m with no engine derating.
Technology
- Cat Grade Control Depth and Slope helps operators work more productively and accurately with less rework.
- Product Link™/VisionLink® connects owners to their equipment, providing access to machine location, hours, fuel consumption, idle time, events, and diagnostic codes.
Specificatii tehnice
SPECIFICATII TEHNICE
| Engine | |
|---|---|
| Engine Model | Cat C4.4 ACERT |
| Net Flywheel Power | 120 kW |
| Bore | 105 mm |
| Stroke | 127 mm |
| Displacement | 4.4 l |
| Power - ISO 9249 - Metric | 120 kW (163 PS/161 hp) |
| Power - ISO 14396 - Metric | 122 kW (166 PS/164 hp) |
| Weights | |
| Operating Weight | 27230 kg |
| Machine Weight | |
| Minimum Operating Weight | 25610 kg |
| Maximum Operating Weight | 27230 kg |
| Service Refill Capacities | |
| Fuel Tank Capacity | 328 l |
| Cooling System | 30 l |
| Engine Oil | 25 l |
| Final Drive - Each | 8 l |
| Swing Drive - Each | 8 l |
| DEF Tank | 19 l |
| Hydraulic System Oil Capacity - Including Tank | 280 l |
| Hydraulic Tank Oil | 128 l |
| Swing | |
| Swing Speed | 11.2 r/min |
| Drive | |
| Maximum Drawbar Pull | 203 kN |
| Maximum Travel Speed | 5.6 km/h |
| Hydraulic System | |
| Maximum Pressure - Swing | 25500 kPa |
| Pilot System - Maximum Pressure | 4100 kPa |
| Main System - Maximum Flow | 429 L/min [214.4 × 2 pumps] (113.3 gal/min [56.7 × 2 pumps]) |
| Pilot System - Maximum Flow | 18 l/min |
| Maximum Pressure - Equipment - Lift Mode | 38000 kPa |
| Maximum Pressure - Travel | 35000 kPa |
| Maximum Pressure - Equipment - Normal | 35000 kPa |
| Sound Performance | |
| Operator Sound Pressure Level - ISO 6396:2008 | 69 dB(A) |
| Exterior Sound Power Level - ISO 6395:2008 | 99 dB(A)* |
| Dimensions - Reach Boom - 5.7 m (18'8 | |
| Length - Center of Rollers | 3650 mm |
| Tail Swing Radius | 1720 mm |
| Shipping Height - Top of Cab | 3060 mm |
| Shipping Height - Top of Boom | 3180 mm |
| Shipping Length | 8920 mm |
| Upperframe Width | 2980 mm |
| Counterweight Clearance | 960 mm |
| SPECIFICATIONS | |
| Maximum Depth Cut for 2440 mm (8'0") Level Bottom | 6540 mm |
| Working Ranges - VA Boom* - 2.4 m Stub/3.3 m Fore; R2.9 Stick | |
| Maximum Digging Depth | 6510 mm |
| Working Ranges - Reach Boom - 5.7 m; R2.9 Stick | |
| Bucket Capacity | 1.19 m³ |
| Dimensions - VA Boom* - 2.4 m Stub/3.3 m Fore; R2.9 Stick | |
| Bucket Capacity | 1.3 m³ |
| Upperframe Width | 2980 mm |
| Shipping Length | 9180 mm |
| Dimensions - Reach Boom - 5.7 m (18'8 | |
| Track Gauge | 2380 mm |
| Sound Performance | |
| Note | *As per European Union Directive 2000/14/EC as amended by 2005/88/EC. |
| Dimensions - VA Boom* - 2.4 m Stub/3.3 m Fore; R2.9 Stick | |
| Shipping Height - Top of Cab | 3060 mm |
| Drive | |
| Gradeability | 30°/70% |
| Working Ranges - Reach Boom - 5.7 m; R2.9 Stick | |
| Maximum Cutting Height | 10960 mm |
| Working Ranges - VA Boom* - 2.4 m Stub/3.3 m Fore; R2.9 Stick | |
| Bucket Capacity | 1.3 m³ |
| Working Ranges - Reach Boom - 5.7 m; R2.9 Stick | |
| Maximum Digging Depth | 6710 mm |
| Working Ranges - VA Boom* - 2.4 m Stub/3.3 m Fore; R2.9 Stick | |
| Maximum Loading Height | 8540 mm |
| Working Ranges - Reach Boom - 5.7 m; R2.9 Stick | |
| Bucket Digging Force - ISO | 150 kN |
| Working Ranges - VA Boom* - 2.4 m Stub/3.3 m Fore; R2.9 Stick | |
| Bucket Digging Force - ISO | 140 kN |
| Stick Digging Force - ISO | 107 kN |
| Dimensions - VA Boom* - 2.4 m Stub/3.3 m Fore; R2.9 Stick | |
| Undercarriage Width - 600 mm Shoes | 2980 mm |
| Length - Center of Rollers | 3650 mm |
| Working Ranges - VA Boom* - 2.4 m Stub/3.3 m Fore; R2.9 Stick | |
| Maximum Reach - Ground Line | 10130 mm |
| Dimensions - VA Boom* - 2.4 m Stub/3.3 m Fore; R2.9 Stick | |
| Ground Clearance | 450 mm |
| Dimensions - Reach Boom - 5.7 m (18'8 | |
| Undercarriage Width - 700 mm Shoes | 3080 mm |
| Working Ranges - VA Boom* - 2.4 m Stub/3.3 m Fore; R2.9 Stick | |
| Maximum Vertical Wall Digging Depth | 5170 mm |
| Dimensions - VA Boom* - 2.4 m Stub/3.3 m Fore; R2.9 Stick | |
| Track Gauge | 2380 mm |
| Dimensions - Reach Boom - 5.7 m (18'8 | |
| Handrail Height | 3180 mm |
| Dimensions - VA Boom* - 2.4 m Stub/3.3 m Fore; R2.9 Stick | |
| Handrail Height | 3180 mm |
| Working Ranges - Reach Boom - 5.7 m; R2.9 Stick | |
| Maximum Reach - Ground Line | 9790 mm |
| Dimensions - Reach Boom - 5.7 m (18'8 | |
| Track Length | 4460 mm |
| Engine | |
| Note | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes. |
| Working Ranges - VA Boom* - 2.4 m Stub/3.3 m Fore; R2.9 Stick | |
| Note | *For Europe only. |
| Dimensions - VA Boom* - 2.4 m Stub/3.3 m Fore; R2.9 Stick | |
| Tail Swing Radius | 1720 mm |
| Counterweight Clearance | 960 mm |
| Dimensions - Reach Boom - 5.7 m (18'8 | |
| Undercarriage Width - 790 mm Shoes | 3170 mm |
| Dimensions - VA Boom* - 2.4 m Stub/3.3 m Fore; R2.9 Stick | |
| Shipping Height - Top of Boom | 3140 mm |
| Working Ranges - Reach Boom - 5.7 m; R2.9 Stick | |
| Maximum Loading Height | 7890 mm |
| Working Ranges - VA Boom* - 2.4 m Stub/3.3 m Fore; R2.9 Stick | |
| Minimum Loading Height | 3420 mm |
| Dimensions - VA Boom* - 2.4 m Stub/3.3 m Fore; R2.9 Stick | |
| Undercarriage Width - 790 mm Shoes | 3170 mm |
| Working Ranges - Reach Boom - 5.7 m; R2.9 Stick | |
| Stick Digging Force - ISO | 106 kN |
| Dimensions - VA Boom* - 2.4 m Stub/3.3 m Fore; R2.9 Stick | |
| Undercarriage Width - 700 mm Shoes | 3080 mm |
| Working Ranges - Reach Boom - 5.7 m; R2.9 Stick | |
| Maximum Vertical Wall Digging Depth | 5000 mm |
| Minimum Loading Height | 2960 mm |
| Dimensions - Reach Boom - 5.7 m (18'8 | |
| Undercarriage Width - 600 mm Shoes | 2980 mm |
| Ground Clearance | 450 mm |
| Working Ranges - VA Boom* - 2.4 m Stub/3.3 m Fore; R2.9 Stick | |
| Maximum Cutting Height | 11650 mm |
| SPECIFICATIONS | |
| Maximum Depth Cut for 2440 mm (8'0") Level Bottom | 6420 mm |
| Dimensions - VA Boom* - 2.4 m Stub/3.3 m Fore; R2.9 Stick | |
| Track Length | 4460 mm |
| Note | *For Europe only. |
| Dimensions - Reach Boom - 5.7 m (18'8 | |
| Bucket Capacity | 1.19 m³ |
Doriti un sfat sau o recomandare?
Contactati-ne acum!
Sunati-ne
+40747185657
