- FOLDING CANOPY - SLIDING operator seats - Automatic LEVELLING devices - GRADE control, mechanical - DIGITAL ULTRASOUND GRADE control with 5 sensors - COMBINED ULTRASOUND GRADE control, electronic and mechanical - SLOPE control - DIGITAL SLOPE control - SKI 6.00 m (19' 8") for grade control - PAVING WIDTH REDUCTION elements to 1.00 m (40") - MECHANICAL EXTENSION ELEMENTS with auger extensions for laying widths up to 5.60 m (18' 4") - BURNERS ELECTRONIC IGNITION with automatic adjustment of screed temperature - Proportional augers speed with ULTRASOUND electronic CONTROL and DRIVE - ROTATING side SCREED BULKHEADS - MOTORIZED screed CAMBER ADJUSTMENT - TRACTION on ONE of the FRONT AXLES - SCREED CONTROLS on console panel - BACKUP ALARM - FUMES EXTRACTION - BIODEGRADABLE hydraulic oil - ANTIFREEZE for tires (up to -20°C)
Hopper and Feeding System
The independent movement of the two side wings is obtained by means of two hydraulic cylinders. The bottom plate of the hopper is built of wear-resisting steel. Two conveyors, independently controlled each side, are made of wear-resisting steel. Material conveyed to both sides is spread by two augers, each of them independently controlled and reversible. Four automatic stop feed devices control material supply by acting either on the two conveyors or the two augers.
The screed is equipped with an electrohydraulic device maintaining a constant screed pressure on the bituminous mix, independently from the mix bearing capacity and the paving width. It is also possible to transfer part of the screed weight to the drive axle of the machine, thus increasing remarkably its adherence to the ground.
The hydrostatic drive acts as the service brake; the safety and parking brakes is mechanical disk spring-applied system type and can be applied manually from the console panel. A positive disk braking system produces a proportional braking effect.
Driving Position and Controls
The machine is fitted with two adjustable seats and a sliding console panel. Sliding operator seats are available on request and can be positioned also outside the machine frame in order to guarantee maximum view from both sides of the machine. The console panel is fully equipped with all main operating controls and warning lights. Vibrator control is located at the rear of the machine. All solenoid valves of the hydraulic system can be manually operated and main machine components can be easily reached guaranteeing fast and efficient service interventions.
The screed consists of two central fixed plates and two lateral mobile plates, hydraulically operated, sliding on a telescopic cylindrical guide chromium plated. The smoothing plates are made of wear resisting undeformable steel. The easy modification of the plate axis allows modifications of shapes (V W ) with different angles (+4.5%; -2.5%) according to the job requirements. When the machine stops (for asphalt supply, etc.), the two screed jacks automatically lock in order to avoid undesired marks on the material laid.
Hydromechanic transmission. A variabledisplacement pump feeds the drive system fitted with a twodisplacement piston motor directly connected to the gearbox. An electric servo-control consents machine starting and stopping (for asphalt supply, etc.) with no preset working speed variation. Self-locking differential with final reduction gears in oil bath.
Triple axle carriage; two steering axles and one drive axle. Four large steering bogey wheels mounted to the front oscillating axle rocker arms. The rear tires assure a good adherence even on irregular terrain. Two oscillating and adjustable push rollers are fixed to the front part of the machine.
Fully equipped with work and travel for road circulation.