Algeria 
Belgium 
France 
Luxembourg 
Poland 
Incarcatoare compacte pe roti Cat® 907M
Incarcatorul compact pe roti Cat® 907M ofera performante ridicate, cu o versatilitate remarcabila. Sistemul hidraulic si trenul de rulare reglate de operator din mers adapteaza raspunsul utilajului la sarcina in lucru. Nivelurile reduse de zgomot, cabina spatioasa si comenzile intuitive va ajuta sa lucrati confortabil intreaga zi.
Utilaj nou, second-hand sau de inchiriat, dumneavoastra alegeti!
Comfortable Cab
- Joystick-ul sensibil necesita putin efort la actionare si include un comutator de inaintare/neutru/marsarier, declansatoare pentru blocarea diferentialului si flux continuu, precum si comenzi pentru cea de-a treia functie hidraulica.
- Acces facil in cabina datorita balustradelor amplasate ergonomic, treptelor si platformei de mari dimensiuni.
- Vizibilitate superioara asupra uneltei de lucru, gratie parbrizului lat si incarcatorului Cat cu bara in Z optimizata.
- Niveluri reduse de zgomot.
- Aer conditionat optional, cu functii de dezghetare/degivrare.
- Optional, scaun incalzit cu suspensie pneumatica, reglaj pentru zona lombara si inclinare a spatarului.
Operare usoara
Sistemul electrohidraulic de ultima generatie asigura un control fin cu efort minim, cu cicluri de lucru rapide. Joystick-ul multifunctional mentine un nivel de concentrare ridicat asupra lucrului. Utilajul este usor de controlat prin apasarea unui buton, care va permite sa il configurati cum doriti, in functie de aplicatie.
Articulatie de incarcare cu ridicare paralela
Incarcatorul Cat® cu bara in Z optimizata combina eficienta de sapare a unei bare in Z traditionale cu posibilitatile de conectare a altor unelte, pentru un nivel inalt de performanta si flexibilitate.
- Ridicarea paralela si fortele mari de inclinare pe intreaga plaja de operare va permit sa manevrati sarcinile beneficiind de un control precis si un nivel inalt de siguranta si incredere.
- Articulatia ofera o excelenta vizibilitate a muchiei de taiere a cupei si a varfurilor furcilor.
Performante ridicate
Transmisia hidrostatica controlata electronic asigura o putere reglabila la sol si un control excelent al vitezei la sol pentru cicluri de excavare rapide si flexibilitatea de a efectua eficient o multitudine de sarcini, inclusiv sarcini de basculare la rotire completa si forte de rupere mari, seria M oferind astfel solutii pentru orice aplicatie.
Specificatii tehnice
SPECIFICATII TEHNICE
| Engine | |
|---|---|
| Net Power | 55.3 kW |
| Rated Net Power - 2,400 rpm - SAE J1349 | 54.7 kW |
| Rated Net Power - 2,400 rpm - ISO 9249 (1977)/EEC 80/1269 | 55.3 kW |
| Maximum Gross Power - ISO 14396 | 54.6 kW |
| Maximum Gross Power - SAE J1995 | 55 kW |
| Emissions | *The Cat C3.3B DIT engine meets U.S. EPA Tier 4 Final/EU Stage V (Europe only) or U.S. EPA Tier 4 Final (North America only) emission standards. |
| Engine Model | Cat® C3.3B DIT* |
| Weights | |
| Operating Weight | 5750 kg |
| Service Refill Capacities | |
| Engine Crankcase | 11.2 l |
| Hydraulic System - Including Tank | 70 l |
| Fuel Tank | 78 l |
| Cooling System | 16.5 l |
| Operating Specifications | |
| Rated Bucket Capacity | 1 m³ |
| Loader Hydraulic System | |
| Relief Pressure - Tilt Cylinder Head | 31000 kPa |
| 3rd Function Maximum Working Pressure | 23500 kPa |
| Maximum Flow - Implement Pump - Auxiliary Function Standard Flow | 73 l/min |
| Relief Pressure - Tilt Cylinder Rod | 19000 kPa |
| Maximum Flow - Implement Pump | 73 l/min |
| Maximum Flow - Implement Pump - Auxiliary Function High Flow | 116 l/min |
| Maximum Working Pressure - Implement Pump | 23500 kPa |
| Operating Specifications | |
| Clearance - Full Lift and 45° Dump | 2429 mm |
| Reach - Full Lift and 45° Dump | 792 mm |
| Steering Articulation Angle - Each Direction | 39° |
| Full Turn Tipping Load | 3500 kg |
| Tipping Load - Full Turn - ISO 14397-1 | 3330 kg |
| Tipping Load - Straight - ISO 14397-1 | 4087 kg |
| Dimensions with Bucket (Approximate) - Standard Lift - With ISO Coupler | |
| Note (2) | **Vary with tire. |
| Departure Angle | 33° |
| Height - Ground to Cab** | 2586 mm |
| Clearance - Level Bucket** | 3027 mm |
| Length - Overall* | 5469 mm |
| Dump Angle at Full Lift | 45° |
| Dig Depth** | 95 mm |
| Machine Width | 1840 mm |
| Operating Weight | 5859 kg |
| Height - Ground Clearance** | 300 mm |
| Reach - Bucket at 45°* | 725 mm |
| Turning Radius - Inside of Tires | 2240 mm |
| Width - Tread Center | 1420 mm |
| Note (1) | *Vary with bucket. |
| Clearance - Bucket at 45° * | 2478 mm |
| Length - Wheel Base | 2170 mm |
| Note (3) | Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires. |
| Width - Bucket | 2045 mm |
| Height - Bucket Pin** | 3227 mm |
| Articulation Angle | 39° |
| Turning Radius - Over Bucket | 4489 mm |
| Dimensions with Bucket (Approximate) - Standard Lift - With SSL Coupler | |
| Clearance - Level Bucket** | 3035 mm |
| Width - Tread Center | 1420 mm |
| Machine Width | 1840 mm |
| Turning Radius - Inside of Tires | 2240 mm |
| Turning Radius - Over Bucket | 4473 mm |
| Length - Overall* | 5620 mm |
| Dig Depth** | 107 mm |
| Operating Weight | 5859 kg |
| Height - Bucket Pin** | 3227 mm |
| Note (2) | **Vary with tire. |
| Note (3) | Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires. |
| Clearance - Bucket at 45° * | 2359 mm |
| Width - Bucket | 2045 mm |
| Height - Ground to Cab** | 2586 mm |
| Dump Angle at Full Lift | 45° |
| Reach - Bucket at 45°* | 820 mm |
| Height - Ground Clearance** | 300 mm |
| Length - Wheel Base | 2170 mm |
| Articulation Angle | 39° |
| Departure Angle | 33° |
| Note (1) | *Vary with bucket. |
| Engine | |
| Maximum Gross Power | 54.6 kW |
| Buckets | |
| Bucket Capacities | 0.75 m³-1.5 m³ (1.0 yd³-2.0 yd³) |
| Cab | |
| ROPS | SAE J1040 MAY94, ISO 3471-1994. |
| FOPS | SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II. |
| Loader Hydraulic System | |
| Hydraulic Cycle Time - 1,000 rpm - Dump, at Maximum Lift Height | 3 s |
| Steering | |
| Maximum Steering Torque - 0° (Straight Machine) | 50375 N·m |
| Steering AC Cycle Times - Full Left to Full Right - 2,620 rpm | 3 s |
| Loader Hydraulic System | |
| Hydraulic Cycle Time - 1,800 rpm - Float Down, Maximum Lift to Ground Level | 2.6 s |
| Steering | |
| Nominal Flow - Steering Pump | 43.9 l/min |
| Service Refill Capacities | |
| Axles - Rear | N/A |
| Buckets | |
| Note | All capacities are applicable for each model. Bucket selection must be made with an understanding of the material density and application to ensure machine stability is maintained within the tipping loads stated per model and configuration. |
| Loader Hydraulic System | |
| Hydraulic Cycle Time - 1,000 rpm - Float Down, Maximum Lift to Ground Level | 2.6 s |
| Steering | |
| Maximum Steering Torque - 39° (Full Turn) | 37620 N·m |
| Steering Cylinder, Double Acting - Bore Diameter | 80 mm |
| Loader Hydraulic System | |
| Tilt Cylinder, Double Acting - Stroke | 417 mm |
| Engine | |
| Stroke | 120 mm |
| Tires | |
| Note (4) | Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. |
| Service Refill Capacities | |
| Axles - Front | N/A |
| Engine | |
| Bore | 94 mm |
| Drive Train | |
| Forward - Range 2 | 20 km/h |
| Forward - High Range | 35 km/h |
| Loader Hydraulic System | |
| Hydraulic Cycle Time - 1,800 rpm - Raise, Ground Level to Maximum Lift | 5.5 s |
| Hydraulic Cycle Time - 1,000 rpm - Raise, Ground Level to Maximum Lift | 9.6 s |
| Steering | |
| Steering Articulation Angle - Each Direction | 39° |
| Tires | |
| Option (2) | 340/80 R18 AT-R Firestone |
| Option (7) | 12.5/80 R18 Flexport™ |
| Drive Train | |
| Reverse - Range 2 | 20 km/h |
| Buckets | |
| Grapple | 0.9 m³ (1.2 yd³) heaped |
| Loader Hydraulic System | |
| Lift Cylinder, Double Acting - Rod Diameter | 50 mm |
| Engine | |
| Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 | 260 N·m |
| Loader Hydraulic System | |
| Hydraulic Cycle Time - 1,800 rpm - Total Cycle Time | 9.6 s |
| Lift Cylinder, Double Acting - Stroke | 695 mm |
| Service Refill Capacities | |
| Transmission - Gear Box | 8.5 l |
| Buckets | |
| Multi-Purpose | 0.75 m³ (1.0 yd³), 0.9 m³ (1.2 yd³), 1.05 m³ (1.37 yd³) |
| Light Material | 1.2 m³ (1.6 yd³), 1.5 m³ (2.0 yd³) |
| Tires | |
| Note (3) | In certain applications, the loader's productive capabilities may exceed the tires' tonnes-km/h (ton-mph) capabilities. |
| Note (1) | *Standard tire. |
| Loader Hydraulic System | |
| Lift Cylinder, Double Acting - Bore Diameter | 75 mm |
| Hydraulic Cycle Time - 1,800 rpm - Dump, at Maximum Lift Height | 1.5 s |
| Tires | |
| Option (1) | 335/80 R18 XZSL Michelin |
| Loader Hydraulic System | |
| Tilt Cylinder, Double Acting - Rod Diameter | 55 mm |
| Engine | |
| Note (4) | Flywheel per the SAE reference conditions with the fan at maximum speed. |
| Displacement | 3.3 l |
| Maximum Gross Torque - ISO 14396 | 261 N·m |
| Buckets | |
| General Purpose | 0.8 m³ (1 yd³), 0.9 m³ (1.2 yd³), 1.0 m³ (1.3 yd³), 1.1 m³ (1.4 yd³), 1.3 m³ (1.7 yd³) |
| Steering | |
| Maximum Working Pressure - Steering Pump | 22000 kPa |
| Drive Train | |
| Forward - Range 1 | 10 km/h |
| Engine | |
| Note (6) | Stage V engine available for Europe only. |
| Note (5) | The Cat C3.3B DIT Tier 4 Final/Stage V uses an active regeneration system which requires no operator interaction under normal conditions. |
| Loader Hydraulic System | |
| Tilt Cylinder, Double Acting - Bore Diameter | 90 mm |
| Tires | |
| Option (6) | 405/70 R18 SPT9 Dunlop* |
| Option (5) | 340/80 R18 Bibload Michelin |
| Steering | |
| Steering Cylinder, Double Acting - Rod Diameter | 35 mm |
| Service Refill Capacities | |
| Hydraulic Tank | 46 l |
| Drive Train | |
| Reverse - Range 1 | 10 km/h |
| Engine - Tier 4 Final/Stage IV | |
| Maximum Net Torque - SAE J1349 | 257 N·m |
| Tires | |
| Option (4) | 340/80 R18 TRI2 Nokian |
| Engine | |
| Maximum Gross Power - DIN ISO 14396 | 55 kW |
| Note (3) | No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems. |
| Drive Train | |
| Reverse - High Range | 35 km/h |
| Steering | |
| Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left | <6 turns |
| Tires | |
| Option (3) | 340/80 R18 XMCL Michelin |
| Steering | |
| Steering Cylinder, Double Acting - Stroke | 300 mm |
| Loader Hydraulic System | |
| Boost Flow Maximum Pressure | 22000 kPa |
| Cab | |
| Note (2) | When properly installed and maintained, the cab offered by Caterpillar, when tested with doors, and windows closed as per work cycle procedures specified in ISO 6395 2008, results in operator sound exposure Leq (Equivalent sound pressure level) of... |
| Engine | |
| Note (1) | Net power ratings are tested at the reference conditions for the specified standard. |
| Cab | |
| Note (1) | Cat cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
| Engine | |
| Note (2) | Net power shown is the power available at the flywheel when the engine is equipped with alternator, air cleaner, diesel exhaust filter, and fan at minimum speed. |
| Weights | |
| Note | Specifications shown are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, Dunlop 405/70 SPT9 tires, full fuel, comfort ROPS cab, standard flow hydraulics and skid-steer coupler. The 907M is... |
| Tires | |
| Note (2) | Other tire choices available, contact your Cat dealer for details. |
Doriti un sfat sau o recomandare?
Contactati-ne acum!
Sunati-ne
+40747185657
