Incarcatoare compacte pe roti Cat® 908M

Incarcatorul compact pe roti Cat® 908M ofera performante ridicate, cu o versatilitate remarcabila. Sistemul hidraulic si trenul de rulare reglate de operator din mers adapteaza raspunsul utilajului la sarcina in lucru. Nivelurile reduse de zgomot, cabina spatioasa si comenzile intuitive va ajuta sa lucrati confortabil intreaga zi.

Utilaj nou, second-hand sau de inchiriat, dumneavoastra alegeti!

Comfortable Cab

  • Joystick-ul sensibil necesita putin efort la actionare si include un comutator de inaintare/neutru/marsarier, declansatoare pentru blocarea diferentialului si flux continuu, precum si comenzi pentru cea de-a treia functie hidraulica.
  • Acces facil in cabina datorita balustradelor amplasate ergonomic, treptelor si platformei de mari dimensiuni.
  • Vizibilitate superioara asupra uneltei de lucru, gratie parbrizului lat si incarcatorului Cat cu bara in Z optimizata.
  • Niveluri reduse de zgomot.
  • Aer conditionat optional, cu functii de dezghetare/degivrare.
  • Optional, scaun incalzit cu suspensie pneumatica, reglaj pentru zona lombara si inclinare a spatarului..

Operare usoara

Sistemul electrohidraulic de ultima generatie asigura un control fin cu efort minim, cu cicluri de lucru rapide. Joystick-ul multifunctional mentine un nivel de concentrare ridicat asupra lucrului. Utilajul este usor de controlat prin apasarea unui buton, care va permite sa il configurati cum doriti, in functie de aplicatie. .

Articulatie de incarcare cu ridicare paralela

Incarcatorul Cat® cu bara in Z optimizata combina eficienta de sapare a unei bare in Z traditionale cu posibilitatile de conectare a altor unelte, pentru un nivel inalt de performanta si flexibilitate.

  • Ridicarea paralela si fortele mari de inclinare pe intreaga plaja de operare va permit sa manevrati sarcinile beneficiind de un control precis si un nivel inalt de siguranta si incredere.
  • Articulatia ofera o excelenta vizibilitate a muchiei de taiere a cupei si a varfurilor furcilor.

Performante ridicate

Transmisia hidrostatica controlata electronic asigura o putere reglabila la sol si un control excelent al vitezei la sol pentru cicluri de excavare rapide si flexibilitatea de a efectua eficient o multitudine de sarcini, inclusiv sarcini de basculare la rotire completa si forte de rupere mari, seria M oferind astfel solutii pentru orice aplicatie.

Specificatii tehnice

SPECIFICATII TEHNICE

Engine
Net Power 55.3 kW
Rated Net Power - 2,400 rpm - SAE J1349 54.7 kW
Engine Model Cat® C3.3B DIT*
Emissions *The Cat C3.3B DIT engine meets U.S. EPA Tier 4 Final/EU Stage V (Europe only) or U.S. EPA Tier 4 Final (North America only) emission standards.
Maximum Gross Power - ISO 14396 54.6 kW
Maximum Gross Power - SAE J1995 55 kW
Rated Net Power - 2,400 rpm - ISO 9249 (1977)/EEC 80/1269 55.3 kW
Weights
Operating Weight 6365 kg
Service Refill Capacities
Engine Crankcase 11.2 l
Fuel Tank 78 l
Hydraulic System - Including Tank 72 l
Cooling System 16.5 l
Operating Specifications
Rated Bucket Capacity 1.1 m³
Loader Hydraulic System
Maximum Flow - Implement Pump 82 l/min
Relief Pressure - Tilt Cylinder Rod 19000 kPa
Maximum Flow - Implement Pump - Auxiliary Function Standard Flow 82 l/min
Relief Pressure - Tilt Cylinder Head 31000 kPa
3rd Function Maximum Working Pressure 23500 kPa
Maximum Flow - Implement Pump - Auxiliary Function High Flow 126 l/min
Maximum Working Pressure - Implement Pump 23500 kPa
Operating Specifications
Reach - Full Lift and 45° Dump 931 mm
Full Turn Tipping Load 3770 kg
Tipping Load - Full Turn - ISO 14397-1 3606 kg
Clearance - Full Lift and 45° Dump 2463 mm
Steering Articulation Angle - Each Direction 39°
Tipping Load - Straight - ISO 14397-1 4427 kg
Dimensions with Bucket (Approximate) - Standard Lift - With ISO Coupler
Length - Wheel Base 2170 mm
Width - Tread Center 1570 mm
Departure Angle 33°
Operating Weight 6499 kg
Height - Ground to Cab** 2650 mm
Reach - Bucket at 45°* 770 mm
Clearance - Level Bucket** 3215 mm
Length - Overall* 5630 mm
Machine Width 1985 mm
Turning Radius - Inside of Tires 2080 mm
Clearance - Bucket at 45° * 2620 mm
Width - Bucket 2080 mm
Note (3) Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.
Height - Ground Clearance** 340 mm
Note (1) *Vary with bucket.
Dump Angle at Full Lift 45°
Height - Bucket Pin** 3410 mm
Note (2) **Vary with tire.
Articulation Angle 39°
Dig Depth** 101 mm
Turning Radius - Over Bucket 4530 mm
Dimensions with Bucket (Approximate) - Standard Lift - With SSL Coupler
Operating Weight 6497 kg
Machine Width 1985 mm
Length - Overall* 5780 mm
Height - Ground Clearance** 340 mm
Width - Tread Center 1570 mm
Clearance - Level Bucket** 3215 mm
Articulation Angle 39°
Turning Radius - Inside of Tires 2080 mm
Length - Wheel Base 2170 mm
Departure Angle 33°
Note (1) *Vary with bucket.
Clearance - Bucket at 45° * 2505 mm
Height - Ground to Cab** 2650 mm
Reach - Bucket at 45°* 866 mm
Note (2) **Vary with tire.
Turning Radius - Over Bucket 4534 mm
Dig Depth** 109 mm
Dump Angle at Full Lift 45°
Note (3) Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.
Height - Bucket Pin** 3410 mm
Width - Bucket 2080 mm
Engine
Maximum Gross Power 54.6 kW
Buckets
Bucket Capacities 0.75 m³-1.5 m³ (1.0 yd³-2.0 yd³)
Cab
ROPS SAE J1040 MAY94, ISO 3471-1994.
FOPS SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II.
Drive Train
Reverse - High Range 35 km/h
Loader Hydraulic System
Hydraulic Cycle Time - 1,000 rpm - Raise, Ground Level to Maximum Lift 9.6 s
Engine
Note (6) Stage V engine available for Europe only.
Loader Hydraulic System
Tilt Cylinder, Double Acting - Stroke 416 mm
Drive Train
Forward - High Range 35 km/h
Reverse - Range 1 10 km/h
Buckets
Note All capacities are applicable for each model. Bucket selection must be made with an understanding of the material density and application to ensure machine stability is maintained within the tipping loads stated per model and configuration.
Steering
Nominal Flow - Steering Pump 43.9 l/min
Loader Hydraulic System
Lift Cylinder, Double Acting - Bore Diameter 85 mm
Steering
Steering Cylinder, Double Acting - Rod Diameter 35 mm
Engine
Note (3) No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Note (5) The Cat C3.3B DIT Tier 4 Final/Stage V uses an active regeneration system which requires no operator interaction under normal conditions.
Steering
Steering AC Cycle Times - Full Left to Full Right - 2,620 rpm 3 s
Service Refill Capacities
Axles - Front N/A
Drive Train
Forward - Range 2 20 km/h
Tires
Option (1) 360/80 R20 TRI2 Nokian
Cab
Note (2) When properly installed and maintained, the cab offered by Caterpillar, when tested with doors, and windows closed as per work cycle procedures specified in ISO 6395 2008, results in operator sound exposure Leq (Equivalent sound pressure level) of...
Steering
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left <6 turns
Engine
Maximum Gross Power - DIN ISO 14396 55 kW
Tires
Option (5) 405/70 R20 SPT9 Dunlop
Drive Train
Reverse - Range 2 20 km/h
Engine
Note (2) Net power shown is the power available at the flywheel when the engine is equipped with alternator, air cleaner, diesel exhaust filter, and fan at minimum speed.
Tires
Note (2) In certain applications, the loader's productive capabilities may exceed the tires' tonnes-km/h (ton-mph) capabilities.
Note (1) Other tire choices available, contact your Cat dealer for details.
Loader Hydraulic System
Hydraulic Cycle Time - 1,000 rpm - Dump, at Maximum Lift Height 3 s
Tilt Cylinder, Double Acting - Rod Diameter 55 mm
Tires
Option (4) 400/70 R20 Bibload Michelin
Engine
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 260 N·m
Steering
Steering Articulation Angle - Each Direction 39°
Loader Hydraulic System
Hydraulic Cycle Time - 1,800 rpm - Float Down, Maximum Lift to Ground Level 2.6 s
Weights
Note Specifications shown are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, Dunlop 405/70 SPT9 tires, full fuel, comfort ROPS cab, standard flow hydraulics and skid-steer coupler. The 908M is...
Loader Hydraulic System
Lift Cylinder, Double Acting - Stroke 699 mm
Hydraulic Cycle Time - 1,800 rpm - Dump, at Maximum Lift Height 1.5 s
Engine
Displacement 3.3 l
Steering
Steering Cylinder, Double Acting - Bore Diameter 80 mm
Engine
Maximum Gross Torque - ISO 14396 261 N·m
Loader Hydraulic System
Boost Flow Maximum Pressure 22000 kPa
Buckets
General Purpose 0.8 m³ (1 yd³), 0.9 m³ (1.2 yd³), 1.0 m³ (1.3 yd³), 1.1 m³ (1.4 yd³), 1.3 m³ (1.7 yd³)
Tires
Note (3) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Steering
Maximum Working Pressure - Steering Pump 22000 kPa
Engine
Stroke 120 mm
Drive Train
Forward - Range 1 10 km/h
Engine
Bore 94 mm
Loader Hydraulic System
Lift Cylinder, Double Acting - Rod Diameter 50 mm
Engine - Tier 4 Final/Stage IV
Maximum Net Torque - SAE J1349 257 N·m
Steering
Maximum Steering Torque - 0° (Straight Machine) 57630 N·m
Tires
Option (3) 400/70 R20 XMCL Michelin
Loader Hydraulic System
Hydraulic Cycle Time - 1,000 rpm - Float Down, Maximum Lift to Ground Level 2.6 s
Buckets
Grapple 0.9 m³ (1.2 yd³) heaped
Loader Hydraulic System
Tilt Cylinder, Double Acting - Bore Diameter 100 mm
Service Refill Capacities
Axles - Rear N/A
Engine
Note (4) Flywheel per the SAE reference conditions with the fan at maximum speed.
Cab
Note (1) Cat cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Service Refill Capacities
Transmission - Gear Box 11 l
Buckets
Multi-Purpose 0.75 m³ (1.0 yd³), 0.9 m³ (1.2 yd³), 1.05 m³ (1.37 yd³)
Light Material 1.2 m³ (1.6 yd³), 1.5 m³ (2.0 yd³)
Steering
Maximum Steering Torque - 39° (Full Turn) 42570 N·m
Loader Hydraulic System
Hydraulic Cycle Time - 1,800 rpm - Total Cycle Time 9.6 s
Engine
Note (1) Net power ratings are tested at the reference conditions for the specified standard.
Tires
Option (6) 12.5-20 ATU Firestone
Steering
Steering Cylinder, Double Acting - Stroke 300 mm
Service Refill Capacities
Hydraulic Tank 46 l
Tires
Option (2) 375/75 R20 XZSL Michelin
Loader Hydraulic System
Hydraulic Cycle Time - 1,800 rpm - Raise, Ground Level to Maximum Lift 5.5 s
Doriti un sfat sau o recomandare?

Contactati-ne acum!

Sunati-ne
+40747185657
CONTACTATI-NE

STIRI SI NOUTATI