Incarcatoare compacte pe roti Cat® 914

Incarcatorul frontal compact pe roti Cat® 914 dispune de un motor C3.6, o articulatie optimizata Cat cu bara Z, o serie de unelte de lucru, un sistem electro-hidraulic de ultima generatie, o transmisie adaptata, vizibilitate maxima din cabina, intervale extinse de intretinere si un acces excelent pentru service, precum si functii standard ce conduc la reducerea consumului de combustibil.

Utilaj nou, second-hand sau de inchiriat, dumneavoastra alegeti!

TRANSMISIE ADAPTATA

Schimbarea fina a treptelor de viteza si accelerarea puternica se combina cu franarea hidrostatica modulata in pedala de inching/franare, ducand la o anume cadenta pentru mutarea materialului. Deplasarea la viteza foarte redusa (optiunea creeper) si controlul electronic al turatiei motorului usureaza operarea uneltelor de lucru precum periile hidraulice si frezele de zapada. Operatorul alege intre schimbarea fina sau agresiva a treptelor doar prin simpla apasare a unui buton.

UNELE DE LUCRU

914 poate fi echipat cu unelte exclusive Cat, cupe din seria Performance și furci pentru paleți. Aceste unelte de lucru sporesc productivitatea și sunt disponibile fie cu un stil de cuplare integrat Toolcarrier (IT), fie ISO (lat). Uneltele de cuplare din seriile mai vechi, cum ar fi: periile, graiferele, cupele multifuncționale și alte unelte de lucru rămân în continuare compatibile.

ARTICULATIE OPTIMIZATA CAT CU BARA IN Z

Pentru o performanta si o versatilitate ridicate, articulatia de brat optimizata Cat cu bara Z combina eficienta de sapare a unei bare traditionale in Z cu capacitatile unui utilaj purtator de unelte de lucru (tool carrier). Cu cinematica paralela si forte mari de inclinare pe intreaga sa plaja de operare, puteti manipula in siguranta si cu incredere sarcinile, avand un control precis.

INTRETINERE

Intervalele de service extinse si accesul excelent pentru efectuarea lucrarilor de intretinere fac verificarile zilnice rapide si usoare, permitandu-va sa reincepeti lucrul mai repede.

Motor Cat® C3.6

Motor conform standardelor de emisii EU Stage V.

SISTEM HIDRAULIC SI COMENZI

Sistemul electro-hidraulic de ultima generatie asigura un control fin cu efort redus, cu timpi de ciclu rapizi. Joystick-ul multifunctional ii permite operatorului sa se concentreze pe lucru. Acesta poate regla capacitatea de reactie a utilajului printr-o simpla apasare de buton, ceea ce permite configurarea utilajului exact asa cum o doreste, in functie de aplicatie. Optiunea High Flow (debit mare) permite folosirea celor mai solicitante unelte de lucru.

Cabina

Vizibilitatea in jurul utilajului este imbunatatita si mai mult datorita camerei retrovizoare. Cabina Deluxe asigura operatorului confortul necesar, fiind dotata cu scaun incalzit cu suspensie pneumatica si comenzi usor de utilizat. Functiile disponibile, precum Implement & Hystat Aggressiveness, Ride Control, Lift & Tilt Kickouts, modul Furci/Cupa si Rimpull Control ii permit operatorului sa personalizeze utilajul prin intermediul tastaturii tactile.

FUNCTII STANDARD DE ECONOMISIRE A CONSUMULUI DE COMBUSTIBIL

Functiile standard de economisire a consumului de combustibil, precum modul Eco, ventilatorul de racire la cerere si Auto Engine Idle Shutdown, fac ca modelul 914 sa fie atat puternic, cat si eficient din punctul de vedere al consumului de combustibil.

EFICIENT SI PUTERNIC

Eficient si puternic datorita sarcinilor sale mari de basculare, fortelor mari de rupere si puterii eficiente a motorului, utilajul reprezinta o solutie echilibrata pentru toate aplicatiile clientilor.

Specificatii tehnice

SPECIFICATII TEHNICE

Engine
Maximum Gross Power 82 kW
Maximum Net Torque - ISO 9249 443 N·m
Engine Model Cat C3.6
Maximum Gross Torque - ISO 14396 450 N·m
Maximum Gross Power - ISO 14396 (DIN) 82 kW
Rated Net Power - ISO 9249 73 kW
Maximum Gross Power - Maximum Engine Speed 2350 r/min
Maximum Net Torque - SAE J1349 446 N·m
Emissions Engine meets Tier 4 Final/Stage V emission standards.
Rated Net Power - SAE J1349 74 kW
Maximum Gross Power - ISO 14396 82 kW
Maximum Gross Power - SAE J1995 83 kW
Bore 98 mm
Rated Net Power - ISO 9249 (DIN) 73 kW
Rated Net Power - Rated Engine Speed 2200 r/min
Stroke 120 mm
Displacement 3.6 l
Maximum Gross Torque - SAE J1995 454 N·m
Note Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Weights
Operating Weight 8668 kg
Buckets
Bucket Capacities 1.3-1.9 m3 (1.7-2.5 yd3)
Bucket Capacities - General Purpose 1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities - Light Material 2.5-3.5 m³ (3.3-4.6 yd³)
Steering
Maximum Flow - Steering Pump 82 l/min
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.75 turns
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed 2.8 s
Maximum Working Pressure - Steering Pump 22500 kPa
Steering Articulation Angle - Each Direction 40 °
Loader Hydraulic System
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure 21000 kPa
Maximum Flow - Implement Pump 148 l/min
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard 90 l/min
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure 21000 kPa
Hydraulic Cycle Time - Total Cycle Time 12.5 s
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift 5.2 s
Maximum Flow - Implement Pump - 4th Function, Maximum Flow 90 l/min
Hydraulic Cycle Time - Dump, at Maximum Reach 1.4 s
Relief Pressure - Tilt Cylinder 34000 kPa
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High 120 l/min
Maximum Working Pressure - Implement Pump 28000 kPa
Hydraulic Cycle Time - Rackback 2.2 s
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level 3.7 s
Service Refill Capacities
Cooling System 21.5 l
Fuel Tank 165 l
Note DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Axles - Rear Center Differential 7.5 l
Hydraulic System - Including Tank 98 l
Diesel Exhaust Fluid (DEF) Tank 18 l
Engine Crankcase 10 l
Hydraulic Tank 55 l
Transmission 3.2 l
Axles - Front Center Differential 7.5 l
Transmission
Note *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward and Reverse - Speed Range 3 40 km/h
Forward and Reverse - Speed Range 1* 10 km/h
Forward and Reverse - Speed Range 2* 20 km/h
Tires
Other Choices Include 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid
Note (1) Other tire choices are available. Contact your Cat dealer for details.
Standard Size 17.5 R25 L2 XTLA
Note (3) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (2) In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Cab
ROPS ISO 3471:2008
FOPS EN ISO 3449:2008 (ISO 3449:2005)
Note (4) *The measurements were conducted with the cab doors and windows closed.
Note (2) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note (3) The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Axles
Rear Oscillating ±11 degrees; Locking differential (Standard)
Front Fixed; Locking differential (standard)
Doriti un sfat sau o recomandare?

Contactati-ne acum!

Sunati-ne
+40747185657
CONTACTATI-NE