Algeria 
Belgium 
France 
Luxembourg 
Poland 
Incarcatoare frontale de talie mica Caterpillar 920
Utilaj nou, second-hand sau de inchiriat, dumneavoastra alegeti!
Articulatia de incarcare Cat cu bara in Z optimizata
Articulatia Cat optimizata cu bara in Z combina eficienta de sapare a unei bare in Z traditionale cu posibilitatile de conectare a altor unelte, pentru un nivel inalt de performanta si flexibilitate. Cu ridicare paralela si forte de basculare ridicate pentru intreaga gama de aplicatii, puteti gestiona sarcinile in siguranta si cu incredere, cu un control precis. Optiunea de ridicare la inaltime este disponibila pentru a extinde raza de actiune si inaltimea de descarcare pentru aplicatii mai solicitante.
Sistem hidraulic si comenzi
Sistemul electrohidraulic de ultima generatie asigura un control fin cu efort minim, cu cicluri de lucru rapide. Joystick-ul multifunctional mentine un nivel de concentrare ridicat asupra lucrului. Utilajul este usor de controlat prin apasarea unui buton, care va permite sa il configurati cum doriti, in functie de aplicatie. Optiunea de debit ridicat permite chiar si utilizarea celor mai exigente unelte de lucru.
Unelte de lucru
Modelul 920 este dotat cu cupele Cat din Seria Performance, precum si cu furci de paleti cu vizibilitate ridicata. Aceste unelte imbunatatesc productivitatea si sunt disponibile cu o Cupla portscula integrata Cat (IT), o interfata de cuplare ISO (extinsa) sau Fusion™. Uneltele mai vechi, cum ar fi periile, cupele tip graifar, cupele multifunctionale si alte unelte de lucru raman compatibile.
Service si intretinere
Intervalele extinse de service si accesul usor pentru service si intretinere fac ca verificarile zilnice sa fie rapide si usoare, permitandu-va sa incepeti lucrul cat mai repede.
Cabina
Vizibilitatea la 360 de grade este imbunatatita datorita camerei retrovizoare. Cabina Deluxe asigura confortul operatorului, cu un scaun incalzit cu suspensie pneumatica si comenzi usor de utilizat. Functiile disponibile, precum controlul atasamentelor, controlul agresivitatii sistemului hidrostatic, controlul cursei, forta de ridicarea si basculare, modul furca/cupa si Rimpull Control (forta de frecare), ii permit operatorului sa seteze utilajul foarte usor cu ajutorul tastaturii tactile.
Tren de rulare modernizat
Schimbarea lenta a treptei de viteza si acceleratia puternica se pot corela cu pedala de franare/inaintare lenta pentru decelerarea hidrostatica, pentru o desfasurare optima a lucrarilor. Controlul avansului lent si controlul electronic al turatiei motorului sunt extrem de utile atunci cand utilizati unelte de lucru precum periile si suflantele de zapada. Prin simpla apasare a unui buton, operatorul controleaza ritmul de lucru (lent sau accelerat).
Caracteristici standard de economisire a combustibilului
Datorita caracteristicilor standard de economisire a combustibilului, cum ar fi modul Eco, ventilatorul reversibil si oprirea automata a motorului la mers in gol, incarcatorul pe roti 920 este puternic si eficient din punct de vedere al consumului de combustibi.
Eficienta si putere
Eficient si puternic, cu sarcini ridicate de basculare la rotire completa, forte de rupere puternice si putere crescuta a motorului, utilajul ofera solutii pentru toate aplicatiile clientilor.
Motor Cat® C3.6
Respecta normele de emisii EPA Tier 4 Final pentru SUA/Nivel V pentru UE.
SPECIFICATII TEHNICE
| Engine | |
|---|---|
| Maximum Gross Power | 90 kW |
| Bore | 98 mm |
| Stroke | 120 mm |
| Displacement | 3.6 l |
| Maximum Gross Power - Maximum Engine Speed | 2350 r/min |
| Emissions | Engine meets Tier 4 Final/Stage V emission standards. |
| Note | Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator. |
| Rated Net Power - Rated Engine Speed | 2200 r/min |
| Rated Net Power - SAE J1349 | 90 kW |
| Maximum Gross Power - ISO 14396 (DIN) | 90 kW |
| Maximum Gross Power - ISO 14396 | 90 kW |
| Maximum Gross Torque - SAE J1995 | 505 N·m |
| Engine Model | Cat C3.6 |
| Maximum Gross Power - SAE J1995 | 92 kW |
| Rated Net Power - ISO 9249 (DIN) | 88 kW |
| Rated Net Power - ISO 9249 | 88 kW |
| Maximum Gross Torque - ISO 14396 | 500 N·m |
| Maximum Net Torque - ISO 9249 | 493 N·m |
| Weights | |
| Operating Weight | 9865 kg |
| Buckets | |
| Bucket Capacities | 1.3-1.9 m³ (1.7-2.5 yd³) |
| Bucket Capacities - General Purpose | 1.3-1.9 m³ (1.7-2.5 yd³) |
| Bucket Capacities - Light Material | 2.5-3.5 m³ (3.3-4.6 yd³) |
| Steering | |
| Maximum Working Pressure - Steering Pump | 22000 kPa |
| Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed | 2.3 s |
| Steering Articulation Angle - Each Direction | 40 ° |
| Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left | 3.4 turns |
| Maximum Flow - Steering Pump | 82 l/min |
| Loader Hydraulic System | |
| Relief Pressure - Tilt Cylinder | 32000 kPa |
| Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard | 95 l/min |
| Maximum Flow - Implement Pump | 165 l/min |
| Relief Pressure - Tilt Cylinder - 3rd Function Relief Pressure | 32000 kPa |
| Relief Pressure - Tilt Cylinder - 4th Function Relief Pressure | 32000 kPa |
| Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level | 2.7 s |
| Note | All cycle times listed are with cylinder snubbing turned off. |
| Maximum Working Pressure - Implement Pump | 28000 kPa |
| Hydraulic Cycle Time - Total Cycle Time | 11.5 s |
| Hydraulic Cycle Time - Rackback | 2.2 s |
| Maximum Flow - Implement Pump - 4rd Function, Maximum Flow | 95 l/min |
| Hydraulic Cycle Time - Dump, at Maximum Reach | 1.8 s |
| Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift | 4.8 s |
| Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High | 150 l/min |
| Service Refill Capacities | |
| Transmission | 3.2 l |
| Engine Crankcase | 10 l |
| Diesel Exhaust Fluid (DEF) Tank | 18 l |
| Axles - Rear | 17 l |
| Cooling System | 21.5 l |
| Hydraulic System - Including Tank | 98 l |
| Axles - Front | 17 l |
| Fuel Tank | 165 l |
| Hydraulic Tank | 55 l |
| Note | DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. |
| Transmission | |
| Note | *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1. |
| Forward and Reverse - Speed Range 3 | 40 km/h |
| Forward and Reverse - Speed Range 2* | 20 km/h |
| Forward and Reverse - Speed Range 1* | 10 km/h |
| Axles | |
| Rear | Oscillating ±11 degrees; Locking differential (standard) |
| Front | Fixed; Locking differential (standard) |
| Cab | |
| ROPS | ISO 3471:2008 |
| FOPS | EN ISO 3449:2008 (ISO 3449:2005) |
| Note (3) | The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A). |
| Note (2) | The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A). |
| Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
| Note (4) | *The measurements were conducted with the cab doors and windows closed. |
| Tires | |
| Other Choices Include | 17.5 R25 L3 XHA2; 20.5 R25 L3 XHA3; 17.5-25 L2/L3 SGL; 20.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 20.5 R25 L2 Snow; 17.5 R25 Solid |
| Standard Size | 17.5 R25 L2 XTLA |
| Note (1) | Other tire choices are available. Contact your Cat dealer for details. |
| Note (3) | Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. |
| Note (2) | In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities. |
Contactati-ne acum!
