Incarcatoare frontale de talie mica Cat® 926M

Incarcatorul frontal pe roti Cat 926M stabileste standardul pentru productivitate, eficienta consumului de combustibil si confort pentru operator. Articulatia imbunatatita si optimizata cu bara in Z ofera performantele rapide de incarcare ale unei bare in Z traditionale, combinate cu paralelismul si capabilitatile de manevrare a sarcinii intalnite la transportoarele de unelte. Motorul C7.1 ACERT, cu un cuplu ridicat si turatie joasa, impreuna cu un grup motopropulsor hidrostatic inteligent, asigura un consum eficient de combustibil. Motorul respecta normele de emisii Tier 4 Final/Nivel V cu un modul ecologic pentru emisii curate cu auto-gestionare, astfel incat dvs. sa va puteti concentra asupra lucrului. Testati acum noul standard in domeniu.

Utilaj nou, second-hand sau de inchiriat, dumneavoastra alegeti!

Eficienta si putere

Motorul Cat® C7.1, cu un cuplu ridicat si turatie joasa, impreuna cu un grup motopropulsor hidrostatic inteligent, asigura un consum eficient de combustibil. Motorul respecta normele de emisii Tier 4 Final/Nivel V cu un modul ecologic pentru emisii curate cu auto-gestionare, astfel incat dvs. sa va puteti concentra asupra lucrului. Profitati acum de noul standard din industrie.

Gama de moduri de putere va permite sa alegeti intre eficienta maxima a consumului de combustibil sau putere crescuta si viteza hidraulica.

MODUL STANDARD

  • Economiseste combustibil si reduce nivelul sonor din cabina
  • Cele mai mari avantaje se observa in timpul aplicatiilor de incarcare si transport, de deszapezire si in aplicatiile rutiere

MODUL PERFORMANTA
  • Activat prin simpla apasare (HP+), creste puterea motorului cu pana la 10% si turatia motorului cu peste 12%
  • Creste durata ciclului hidraulic si productivitatea

Blocati si porniti la lucru cu diferentialul complet blocabil pe fata, actionat din mers, la cuplu maxim. Maximizati tractiunea cu diferentialul cu alunecare limitata pe puntea din spate, optional, pentru putere in panta.

Operare usoara

ARTICULATIA OPTIMIZATA CU BARA IN Z

Articulatia optimizata cu bara in Z combina eficienta de sapare a unei bare in Z traditionale cu posibilitatile de conectare a altor unelte, pentru un nivel inalt de performanta si flexibilitate. Vizibilitatea la colturile cupei si dintii furcii la nivelul solului ramane excelenta, iar campul vizual la ridicare maxima este maximizat datorita bratului de ridicare de Generatia a III-a. Ridicati mai sus si ajungeti mai departe datorita articulatiei optionale la ridicare inalta, disponibila pe toate cele trei modele.

CUPELE CU INCARCARE RAPIDA DIN SERIA PERFORMANCE

Cupele din seria Performance au o capacitate de umplere cu pana la 10% mai mare comparativ cu modelele anterioare si o capacitate de retentie a materialelor mai buna, imbunatatind semnificativ productivitatea si eficienta consumului de combustibil. Cupele au o podea mai lunga pentru a prelua o sarcina mai mare, o deschidere mai larga si bare laterale curbate pentru o mai buna retentie a materialului.

Asistenta pentru clienti

Bazati-va pe dealerul dvs. Cat pentru a va ajuta la fiecare pas cu optiuni de vanzare, inchiriere sau reconditionare de utilaje noi sau rulate, pentru a raspunde nevoilor afacerii dvs.

Maximizati timpii de functionare ai utilajului dvs. cu piese disponibile la nivel global, tehnicieni calificati si contracte de asistenta pentru clienti.

Permiteti-ne sa va optimizam activitatea. Testati un incarcator pe roti de talie mica din seria M si alaturati-va familiei Caterpillar.

Service

Incepeti lucrul rapid datorita accesului la punctele de service de la nivelul solului si iluminarii optionale a compartimentului motorului. Cele trei usi mari de service ofera acces complet la filtre si punctele de service. Intervalele de service extinse pentru filtrele hidraulice si ale grupului motopropulsor reduc timpul de intretinere si maximizeaza timpul de functionare. Functiile de service suplimentare includ:

  • Product Link™ PRO standard cu abonament optional la VisionLink®.
  • Memento-uri de intretinere afisate pe ecranul secundar la intervale programate.
  • Filtru de particule diesel conceput pentru o durata de viata extra-lunga.
  • Serviciu de filtrare rapida a combustibilului cu pompa electrica de amorsare a combustibilului de la Caterpillar.
  • Contacte pentru surse externe de curent (pentru pornire de urgenta) echipate standard.
  • Sistem de racire pentru curatare indelungata, si racitoare cu 6 ventilatoare pe inch, echipate standard.
  • Lubrifiere automata integrata (optional) cu frecventa de ungere reglabila.

Confort intreaga zi

Un mediu de operare spatios, silentios si confortabil va ajuta sa ramaneti relaxat si productiv pe tot parcursul zilei. Va bucurati de vizibilitate superioara la 360 de grade datorita parbrizului monobloc, articulatiei reproiectate si montajului simplificat al furtunurilor hidraulice. Comenzile montate pe scaun cu joystick pentru functii de ridicare si inclinare, alaturi de un comutator integrat de inaintare/neutru/marsarier, declansatoare pentru blocarea diferentialului, precum si comenzi optionale pentru cea de-a treia si cea de-a patra functie hidraulica.

  • Control automat al climatizarii cu incalzire la geamul din spate si oglinzile exterioare
  • Informatii rapide pe ecranul LCD mare
  • Scaun cu sistem de incalzire si racire, optional
  • Sistem antitangaj, optional
  • Amortizare electrohidraulica a cilindrului la cap de cursa
  • Vizibilitate suplimentara pe santier datorita camerei retrovizoare optionale* si sistemului optional integrat de detectare a obiectelor din spatele utilajului

*Standard in Europa.

Experienta personalizata

Incarcatoarele pe roti din seria M pastreaza in memorie setarile dvs. personale datorita codurilor unice de operator, pentru a spori siguranta utilajului.

Puteti adapta comenzile utilajului la nevoile dvs. specifice.

  • Selectati modul de putere al motorului
  • Reduceti uzura anvelopelor folosind functia Rimpull Control (forta de frecare)
  • Optimizati viteza la sol cu functia Creeper Control (controlul fluajului)
  • Comenzi electro-hidraulice reglabile
  • Setati directia de deplasare in functie de aplicatia executata

Specificatii tehnice

SPECIFICATII TEHNICE

Engine
Maximum Gross Power 116 kW
Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4) 694 N·m
Maximum Gross Power - 1,600 rpm - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*) 110 kW
Maximum Gross Power - 1,800 rpm - ISO 14396 (Performance Power Mode: Range 1-4) 114 kW
Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) 105 kW
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*) 694 N·m
Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4) 110 kW
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*) 721 N·m
Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4) 113 kW
Maximum Gross Power - 1,800 rpm - ISO 14396 (DIN) (Performance Power Mode: Range 1-4) 116 kW
Maximum Gross Power - 1,600 rpm - ISO 14396 (Standard Power Mode: Range 1-3*) 109 kW
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) 721 N·m
Displacement (Performance Power Mode: Speed Range 1-4) 7.01 l
Displacement (Standard Power Mode: Speed Range 1-3*) 7.01 l
Engine Model Cat C7.1 ACERT**
Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*) 107 kW
Note (1) Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Note (2) No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Note (3) *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Note (4) **The Cat C7.1 ACERT engine meets Tier 4 Final/Stage V off-highway emission standards.
Rated Net Power - 1,800 rpm - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4) 111 kW
Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4) 702 N·m
Maximum Net Torque - ISO 9249:2007 (Standard Power Mode: Range 1-3*) 702 N·m
Rated Net Power - 1,600 rpm - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) 106 kW
Buckets
Bucket Capacities 1.9-5.0 m³ (2.5-6.5 yd³)
Bucket Capacities - General Purpose 1.9-2.5 m³ (2.5-3.2 yd³)
Bucket Capacities - Light Material 3.1-5.0 m³ (4.0-6.5 yd³)
Weights
Operating Weight 12944 kg
Cab
ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level II
Service Refill Capacities
Engine Crankcase 20 l
Loader Hydraulic System
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Total Cycle Time 10.5 s
Cab
Note (2) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, are:
– Standard cab: 68 ±3 dB(A)
– Deluxe cab: 66 ±2 dB(A)
Sound
Note (1) European Union Directive “2000/14/EC.”
Steering
Maximum Flow - Steering Pump 130 l/min
Transmission
Forward and Reverse - Range 4 40 km/h
Forward and Reverse - Range 1* 1-13 km/h (0.6-8 mph)
Forward and Reverse - Range 2 13 km/h
Loader Hydraulic System
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Total Cycle Time 9.5 s
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Float Down, Maximum Lift to Ground Level 2.6 s
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Float Down, Maximum Lift to Ground Level 2.6 s
Steering
Maximum Working Pressure - Steering Pump 24130 kPa
Transmission
Forward and Reverse - Range 3 27 km/h
Steering
Steering Cycle Times - Full Left to Full Right - At 1,800 rpm: 90 rpm Steering Wheel Speed 2.4 s
Loader Hydraulic System
Maximum Flow - Implement Pump 150 l/min
Service Refill Capacities
Fuel Tank 195 l
Axles
Front Fixed; Locking differential (standard)
Service Refill Capacities
Front Axles 21 l
Steering
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.5 turns
Service Refill Capacities
Rear Axles 21 l
Tires
Note (1) Other tire choices are available. Contact your Cat dealer for details.
Service Refill Capacities
Cooling System 30 l
Loader Hydraulic System
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Raise, Ground Level to Maximum Lift 6.2 s
Steering
Maximum Steering Torque - 0° (Straight Machine) 50375 N·m
Loader Hydraulic System
Maximum Working Pressure - Implement Pump 26000 kPa
Air Conditioning System
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.
Service Refill Capacities
Transmission - Gear Box 8.5 l
Steering
Maximum Steering Torque - 40° (Full Turn) 37620 N·m
Loader Hydraulic System
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Dump, at Maximum Lift Height 1.7 s
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Dump, at Maximum Lift Height 1.5 s
Service Refill Capacities
Note DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Tires
Other Choices Include 20.5 R25, radial (L-2); 20.5 R25, radial (L-5); 20.5-25 12PR (L-2); 20.5-25 12PR (L-3); 20.5-25 16PR (L-5); 17.5 R25, radial (L-2); 17.5 R25, radial (L-3); 17.5 R25, radial (L-5); 550/65 R25 radial (L-3); Skidder/Agriculture
Loader Hydraulic System
Maximum Flow - Implement Pump - 4th Function Maximum Flow* 150 l/min
Cab
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Service Refill Capacities
Hydraulic Tank 90 l
Transmission
Note *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display, when equipped. Factory default is 7 km/h (4.4 mph).
Cab
Note (3) *The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Loader Hydraulic System
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure 28000 kPa
Tires
Note (2) In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Loader Hydraulic System
Note (1) *3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display, when equipped.
Relief Pressure - Tilt Cylinder 28000 kPa
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure 26000 kPa
Tires
Note (3) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Loader Hydraulic System
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Raise, Ground Level to Maximum Lift 5.5 s
Service Refill Capacities
Hydraulic System - Including Tank 160 l
Steering
Steering Articulation Angle - Each Direction 40°
Axles
Rear Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)
Tires
Standard Size 20.5 R25, radial (L-3)
Service Refill Capacities
Diesel Exhaust Fluid (DEF) Tank 19 l
Sound
Average Exterior Sound Pressure (ISO 6395:2008) 101 dB(A)
Loader Hydraulic System
Maximum Flow - Implement Pump - 3rd Function Maximum Flow* 150 l/min
Sound
Operator Sound Pressure (ISO 6396:2008) 72 dB(A)
Doriti un sfat sau o recomandare?

Contactati-ne acum!

Sunati-ne
+40747185657
CONTACTATI-NE

STIRI SI NOUTATI