Incarcatoare frontale de talie mica Cat® 926M pentru agregate

Incarcatorul frontal pe roti Cat 926M pentru agregate stabileste standardul pentru productivitate, eficienta consumului de combustibil si confort pentru operator. Motorul C7.1, cu un cuplu ridicat si turatie joasa, impreuna cu un grup motopropulsor hidrostatic inteligent, asigura un consum eficient de combustibil. O crestere a puterii motorului in intervalul 1 pentru lucrari de insilozare maximizeaza productivitatea, in timp ce cresterea puterii in intervalul 4 optimizeaza viteza de deplasare. Nivelurile de zgomot extrem de scazute, cabina spatioasa si comenzile intuitive va permit sa lucrati confortabil toata ziua, si chiar toata noaptea! Testati acum noul standard in domeniu.

Utilaj nou, second-hand sau de inchiriat, dumneavoastra alegeti!

Eficienta si putere

Profitati acum de eficienta unui consum de combustibil similar cu cel al utilajelor de tip hibrid, cu un grup motopropulsor hidrostatic inteligent care va permite cele mai mari economii de combustibil din industrie datorita turatiei reduse a motorului de doar 1.600 rot./min. in modul standard. Gratie tehnologiei exclusive Caterpillar Power-by-Range, care mareste puterea in intervalul 4 pentru o viteza imbunatatita in panta, beneficiati de putere exact atunci cand aveti nevoie. Pentru cele mai dificile si solicitante aplicatii agricole, Modul Performance va va permite sa cresteti puterea si viteza hidraulica in toate intervalele, pentru operare mai rapida. Motorul Cat® C7.1 respecta normele de emisii Nivel V pentru UE si este complet autonom, astfel incat dvs. sa va puteti concentra doar asupra lucrului.

Confort intreaga zi

Luati loc in incarcatorul frontal pe roti Cat 926M pentru agregate si bucurati-va de controlul automat al temperaturii, niveluri de zgomot extrem de scazute, vizibilitate panoramica excelenta si comenzi rapide de tip joystick, adaptabile la fiecare operator, montate pe scaunul cu suspensie, complet reglabil. Spatiul generos pentru operator, sistemul unic de suspensii cu cilindri hidraulici de la Caterpillar si comenzile simple si rapide fac ca acest scaun sa fie cel mai confortabil de pe santier.

Experienta personalizata

Controlati performantele utilajului prin intermediul butoanelor tactile si afisajului optional al ecranului tactil secundar. Reglati rapid debitul auxiliar pentru a optimiza viteza graifarului sau a uneltelor pentru insilozare, porniti ventilatorul reversibil pentru a respira aer curat in mediile cu mult praf, treceti in modul de control precis pentru un control imbunatatit la stivuirea baloturilor, programati pozitiile articulatiei pentru o incarcare usoara a furajelor, ajustati cuplul rotii pentru a-l adapta conditiilor de la sol cand curatati tarcuri si reglati viteza de deplasare in modul Ride Control pentru un transport lin. Incarcatorul pe roti Cat 926M pentru agregate este pregatit pentru provocarile oricarei aplicatii agricole!

Operare usoara

Mutati mai mult material cu cupele brevetate Caterpillar din Seria Performance si articulatia Cat optimizata cu bara in Z care combina eficienta de sapare a unei bare in Z traditionale cu posibilitatile de conectare a altor unelte. Functia de ridicare paralela pentru intreaga gama de aplicatii va permite sa incarcati in siguranta si cu un control precis de la baloturi la cantitati mari de produse agricole. Aplicatiile multifunctionale nu au fost niciodata mai usoare datorita pompelor dedicate pentru fiecare sistem si supapei de reglare a debitului controlata de un sistem inteligent de gestionare a puterii. Ridicati, dirijati si conduceti utilajul fara compromisuri.

Specificatii tehnice

SPECIFICATII TEHNICE

Engine
Maximum Rated Gross Power - ISO 14396 122 kW
Rated Net Power - 1,800 rpm - SAE J1349 at Maximum Fan Speed (Performance Power Mode: Range 1-4) 107 kW
Maximum Rated Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) 1800 r/min
Maximum Rated Gross Power - ISO 14396 (DIN) 122 kW
Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4) 117 kW
Maximum Rated Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4) 122 kW
Rated Net Power 115 kW
Maximum Rated Gross Power - ISO 14396 (Performance Power Mode: Range 1-4) 122 kW
Engine Model Cat® C7.1
Buckets
Bucket Capacities 2.1-4.2 m3 (2.7-5.5 yd3)
Weights
Operating Weight 12994 kg
Engine
Maximum Gross Power 122 kW
Cab
ROPS SAE J1040 MAY94, ISO 3471-1994
FOPS SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II
Loader Hydraulic System
Cycle Times - 1,600 rpm - Standard: Float Down (Maximum Lift to Ground Level) 2.6 s
Operating Specifications
Full Turn Tip Load 7382 kg
Transmission
Forward - Range 3 27 km/h
Engine
Bore (Performance Power Mode: Range 2-3) 105 mm
Loader Hydraulic System
Cycle Times - 1,600 rpm - Standard: Dump (at Maximum Lift Height) 1.7 s
Engine
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) 804 N·m
Steering
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed 2.4 s
Cab
Exterior Sound Power Level - ISO 6395:2008 101 dB(A)
Transmission
Reverse - Range 3 27 km/h
Loader Hydraulic System
Tilt Cylinder, Double Acting - Bore Diameter 130 mm
Service Refill Capacities
Fuel Tank 195 l
Engine
Rated Net Power - 1,600 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 2 -3) 106 kW
Transmission
Note * Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1.
Reverse - Range 4 40 km/h
Steering
Steering Cylinder, Double Acting - Bore Diameter 70 mm
Engine
Stroke - Performance Power Mode: Range 2-3 135 mm
Bore (Performance Power Mode: Range 1-4) 105 mm
Service Refill Capacities
Axles - Front 21 l
Engine
Maximum Rated Gross Power - Maximum Engine Speed (Performance Power Mode: Range 2-3) 1800 r/min
Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Maximum Fan Speed (Performance Power Mode: Range 1-4) 109 kW
Tires
Option (2) 20.5 R25, Radial (L-5)
Service Refill Capacities
Hydraulic Tank 90 l
Transmission
Forward - Range 4 40 km/h
Loader Hydraulic System
Tilt Cylinder, Double Acting - Rod Diameter 70 mm
Engine
Rated Net Power - 1,800 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance Power Mode: Range 2-3) 111 kW
Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4) 119 kW
Service Refill Capacities
Hydraulic System - Including Tank 160 l
Tires
Option (1) 20.5 R25, Radial (L-3)
Transmission
Reverse - Range 1* 13 km/h
Steering
Maximum Steering Torque - 0° (Straight Machine) 50375 N·m
Engine
Rated Net Power - 1,800 rpm - ISO 9249 (1977)/EEC 80/1269 at Maximum Fan Speed (Performance Power Mode: Range 1-4) 109 kW
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode: Range 1-4) 776 N·m
Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Maximum Fan Speed (Performance Power Mode: Range 2-3) 101 kW
Service Refill Capacities
Axles - Rear 21 l
Loader Hydraulic System
Cycle Times - 1,600 rpm - Standard: Raise (Ground Level to Maximum Lift) 6.2 s
Engine
Rated Net Power - 1,600 rpm - SAE J1349 at Maximum Fan Speed (Standard Power Mode: Range 2-3) 95 kW
Steering
Steering Articulation Angle - Each Direction 40°
Maximum Working Pressure - Steering Pump 24130 kPa
Maximum Steering Torque - 40° (Full Turn) 37620 N·m
Engine
Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4) 768 N·m
Loader Hydraulic System
Maximum Flow - Implement Pump - 3rd and 4th Function Maximum Flow* 150 l/min
Engine
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode: Range 1-4) 776 N·m
Power Train
Note * Differential front locking axle can be engaged on the go at full torque to 10 km/h.
Engine
Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 2-3) 106 kW
Maximum Rated Gross Power - ISO 14396 (Standard Power Mode: Range 2-3) 109 kW
Stroke - Standard Power Mode: Range 2-3 135 mm
Loader Hydraulic System
Relief Pressure - Tilt Cylinder 28000 kPa
Power Train
Front Axle Fixed
Transmission
Forward - Range 2 13 km/h
Engine
Displacement (Performance Power Mode: Range 1-4) 7.01 l
Loader Hydraulic System
Cycle Times - 1,800 rpm - Performance (HP+): Raise (Ground Level to Maximum Lift) 5.5 s
Engine
Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 2-3) 110 kW
Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 2-3) 105 kW
Rated Net Power - 1,600 rpm - SAE J1349 at Maximum Fan Speed (Standard Power Mode: Range 1-4) 105 kW
Bore (Standard Power Mode: Range 1-4) 105 mm
Emissions *Engine meets EU Stage IV emission standards.
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode: Range 2-3) 702 N·m
Service Refill Capacities
Cooling System 30 l
Loader Hydraulic System
Cycle Times - 1,800 rpm - Performance (HP+): Float Down (Maximum Lift to Ground Level) 2.6 s
Transmission
Forward - Range 1* 1-13 km/h (0.6-8 mph)
Service Refill Capacities
Engine Crankcase 20 l
Engine
Maximum Rated Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-4) 119 kW
Transmission
Reverse - Range 2 13 km/h
Engine
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 2-3) 694 N·m
Rated Net Power - 1,800 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance Power Mode: Range 1-4) 119 kW
Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 2-3) 111 kW
Service Refill Capacities
Transmission - Gear Box 8.5 l
Loader Hydraulic System
Cycle Times - 1,800 rpm - Performance (HP+): Total Cycle Time 9.6 s
Engine
Displacement (Performance Power Mode: Range 2-3) 7.01 l
Loader Hydraulic System
Lift Cylinder, Double Acting - Rod Diameter 60 mm
Engine
Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 2-3) 694 N·m
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 2-3) 721 N·m
Weights
Operating Weight - High Lift 13272 kg
Loader Hydraulic System
Note * 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display.
Power Train
Brakes - Parking Spring applied hydraulically released
Engine
Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Maximum Fan Speed (Standard Power Mode: Range 1-4) 106 kW
Loader Hydraulic System
Maximum Flow - Implement Pump 150 l/min
Cycle Times - 1,600 rpm - Standard: Total Cycle Time 10.5 s
Power Train
Brakes - Service Inboard wet disc
Loader Hydraulic System
Cycle Times - 1,800 rpm - Performance (HP+): Dump (at Maximum Lift Height) 1.5 s
Steering
Steering Cylinder, Double Acting - Stroke 438 mm
Engine
Stroke - Standard Power Mode: Range 1-4 135 mm
Maximum Rated Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 2-3) 114 kW
Operating Specifications
Full Turn Tip Load - High Lift 5509 kg
Steering
Steering Cylinder, Double Acting - Rod Diameter 40 mm
Loader Hydraulic System
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure 26000 kPa
Engine
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-4) 768 N·m
Steering
Maximum Flow - Steering Pump 130 l/min
Engine
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 2-3) 721 N·m
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-4) 804 N·m
Rated Net Power - 1,600 rpm - ISO 9249 (1977)/EEC 80/1269 at Maximum Fan Speed (Standard Power Mode: Range 2-3) 96 kW
Maximum Rated Gross Power - ISO 14396 (Standard Power Mode: Range 1-4) 119 kW
Tires
Option (3) 620/65 R25 Ag Tire
Option (4) 750/65 R25 Ag Tire*
Engine
Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Maximum Fan Speed (Standard Power Mode: Range 2-3) 96 kW
Rated Net Power - 1,600 rpm - ISO 9249 (1977)/EEC 80/1269 at Maximum Fan Speed (Standard Power Mode: Range 1-4) 106 kW
Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 2-3) 1600 r/min
Loader Hydraulic System
Lift Cylinder, Double Acting - Stroke 728 mm
Engine
Rated Net Power - 1,800 rpm - ISO 9249 (1977)/EEC 80/1269 at Maximum Fan Speed (Performance Power Mode: Range 2-3) 101 kW
Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-4) 116 kW
Displacement (Standard Power Mode: Range 1-4) 7.01 l
Rated Net Power - 1,800 rpm - SAE J1349 at Maximum Fan Speed (Performance Power Mode: Range 2-3) 100 kW
Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-4) 115 kW
Loader Hydraulic System
Maximum Working Pressure - Implement Pump 26000 kPa
Engine
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode: Range 2-3) 702 N·m
Steering
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.5
Service Refill Capacities
Diesel Exhaust Fluid (DEF) Tank 19 l
Engine
Maximum Rated Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 2-3) 109 kW
Displacement (Standard Power Mode: Range 2-3) 7.01 l
Power Train
Front Axle - Traction Aid* Locking differential standard
Cab
Operator Sound Pressure Level - ISO 6396:2008 68 dB(A)
Power Train
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25 ± 10.5 degrees
Steering
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited 2.8 s
Tires
Note * Base specification tire. Other tire choices available, contact your Cat dealer for details.
Loader Hydraulic System
Lift Cylinder, Double Acting - Bore Diameter 110 mm
Tilt Cylinder, Double Acting - Stroke 555 mm
Engine
Maximum Rated Gross Power - ISO 14396 (Performance Power Mode: Range 2-3) 114 kW
Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-4) 1600 r/min
Loader Hydraulic System
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure 28000 kPa
Engine
Rated Net Power - 1,600 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-4) 116 kW
Transmission
Notes Factory default is 7 km/h (4.4 mph).
Engine
Bore (Standard Power Mode: Range 2-3) 105 mm
Stroke - Performance Power Mode: Range 1-4 135 mm
Power Train
Rear Axle Oscillating
Rear Axle - Oscillation Angle by Tire Size - 750/65, 620/65, Skidder ± 7 degrees
Doriti un sfat sau o recomandare?

Contactati-ne acum!

Sunati-ne
+40747185657
CONTACTATI-NE

STIRI SI NOUTATI