Incarcatoare frontale de talie mica Cat® 926M pentru agregate

Incarcatorul frontal pe roti Cat 926M pentru agregate stabileste standardul pentru productivitate, eficienta consumului de combustibil si confort pentru operator. Motorul C7.1 cu un cuplu ridicat si turatie joasa, impreuna cu un grup motopropulsor hidrostatic inteligent, asigura un consum eficient de combustibil. Articulatia optimizata cu bara in Z si cupele ultra-rezistente din seria Performance cresc capacitatea si durata de viata a cupelor. Nivelurile de zgomot extrem de scazute, cabina spatioasa si comenzile intuitive va permit sa lucrati confortabil toata ziua, si chiar toata noaptea! Testati acum noul standard in domeniu.

Utilaj nou, second-hand sau de inchiriat, dumneavoastra alegeti!

Eficienta si putere

Motorul Cat® C7.1 are o functionare mai curata si mai silentioasa, performante si durabilitate superioare datorita cuplului mare si turatiei reduse. Sistemul Cat, exclusiv, de gestionare inteligenta a puterii monitorizeaza comenzile operatorului si puterea disponibila, pentru a mentine utilajul in functiune la eficienta maxima si pentru a oferi operatorului mai multe posibilitati de setare in functie de aplicatia specifica.

Gama de moduri de putere va permite sa alegeti intre eficienta maxima a consumului de combustibil sau putere crescuta si viteza hidraulica.

MODUL STANDARD

  • Economiseste combustibil si reduce nivelul sonor din cabina
  • Cele mai mari avantaje se observa in timpul aplicatiilor de incarcare si transport, de deszapezire si in aplicatiile rutiere

MODUL PERFORMANTA
  • Activat prin simpla apasare (HP+), creste puterea motorului cu pana la 10% si turatia motorului cu peste 12%
  • Creste durata ciclului hidraulic si productivitatea

Blocati si porniti la lucru cu diferentialul complet blocabil pe fata, actionat din mers, la cuplu maxim. Maximizati tractiunea cu diferentialul cu alunecare limitata pe puntea din spate, optional, pentru putere in panta.

Application Specific Configuration

INCREASED PAYLOAD
Additional counterweight improves stability without reducing ground clearance or departure angle to maximize performance.

LONG LIFE SAND AND GRAVEL BUCKETS
Performance Series Buckets deliver higher fill factors and better material retention for significant productivity and fuel efficiency improvements. The buckets feature a long floor, open throat, curved side bars and additional serviceable wear plates including corner guards.

PROTECT YOUR POWER TRAIN
Increase your fording depths with optional elevated breathers. Remote mounted high on the machine for the front and rear axles and hydrostatic gear box. Allows settling pond clean out without contamination.

Experienta personalizata

Incarcatoarele pe roti pentru agregate din seria M pastreaza in memorie setarile dvs. personale datorita codurilor unice de operator, pentru a spori siguranta utilajului.

Puteti adapta comenzile utilajului la nevoile dvs. specifice.

  • Selectati modul de putere al motorului
  • Reduceti uzura anvelopelor folosind functia Rimpull Control (forta de frecare)
  • Optimizati viteza la sol cu functia Creeper Control (controlul fluajului)
  • Comenzi electro-hidraulice reglabile
  • Setati directia de deplasare in functie de aplicatia executata

Service

Incepeti lucrul rapid datorita accesului la punctele de service de la nivelul solului si iluminarii optionale a compartimentului motorului. Cele trei usi mari de service ofera acces complet la filtre si punctele de service. Intervalele de service extinse pentru filtrele hidraulice si ale grupului motopropulsor reduc timpul de intretinere si maximizeaza timpul de functionare. Functiile de service suplimentare includ:

  • Product Link™ PRO standard cu abonament optional la VisionLink®.
  • Memento-uri de intretinere afisate pe ecranul secundar la intervale programate.
  • Filtru de particule diesel conceput pentru o durata de viata extra-lunga.
  • Serviciu de filtrare rapida a combustibilului cu pompa electrica de amorsare a combustibilului de la Caterpillar.
  • Contacte pentru surse externe de curent (pentru pornire de urgenta) echipate standard.
  • Sistem de racire pentru curatare indelungata, si racitoare cu 6 ventilatoare pe inch, echipate standard.
  • Lubrifiere automata integrata (optional) cu frecventa de ungere reglabila.

Confort intreaga zi

Un mediu de operare spatios, silentios si confortabil va ajuta sa ramaneti relaxat si productiv pe tot parcursul zilei. Va bucurati de vizibilitate superioara la 360 de grade datorita parbrizului monobloc, articulatiei reproiectate si montajului simplificat al furtunurilor hidraulice. Comenzile montate pe scaun cu joystick pentru functii de ridicare si inclinare, alaturi de un comutator integrat de inaintare/neutru/marsarier, declansatoare pentru blocarea diferentialului, precum si comenzi optionale pentru cea de-a treia si cea de-a patra functie hidraulica.

  • Control automat al climatizarii cu incalzire la geamul din spate si oglinzile exterioare
  • Informatii rapide pe ecranul LCD mare
  • Scaun cu sistem de incalzire si racire, optional
  • Sistem antitangaj, optional
  • Amortizare electrohidraulica a cilindrului la cap de cursa
  • Vizibilitate suplimentara pe santier datorita camerei retrovizoare optionale* si sistemului optional integrat de detectare a obiectelor din spatele utilajului

*Standard in Europa.

Asistenta pentru clienti

Bazati-va pe dealerul dvs. Cat pentru a va ajuta la fiecare pas cu optiuni de vanzare, inchiriere sau reconditionare de utilaje noi sau rulate, pentru a raspunde nevoilor afacerii dvs.

Maximizati timpii de functionare ai utilajului dvs. cu piese disponibile la nivel global, tehnicieni calificati si contracte de asistenta pentru client.

Permiteti-ne sa va optimizam activitatea. Testati un incarcator pe roti de talie mica din seria M si alaturati-va familiei Caterpillar.

Specificatii tehnice

SPECIFICATII TEHNICE

Engine
Maximum Rated Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4) 116 kW
Maximum Rated Gross Power - ISO 14396 114 kW
Maximum Rated Gross Power - ISO 14396 (DIN) 116 kW
Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4) 110 kW
Rated Net Power 110 kW
Rated Net Power - 1,800 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance Power Mode: Range 1-4) 111 kW
Maximum Rated Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) 1800 r/min
Maximum Rated Gross Power - ISO 14396 (Performance Power Mode: Range 1-4) 114 kW
Engine Model Cat® C7.1
Buckets
Bucket Capacities 3.0-5.0 m³ (3.9-6.5 yd³)
Weights
Operating Weight 13270 kg
Engine
Maximum Gross Power 116 kW
Bore 105 mm
Stroke 135 mm
Displacement 7.01 l
Cab
ROPS ISO 3471:2008
Service Refill Capacities
Diesel Exhaust Fluid (DEF) Tank 19 l
Engine
Emissions The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage IV off-highway emission standards.
Steering
Steering Cylinder, Double Acting - Stroke 438 mm
Loader Hydraulic System
Relief Pressure - Tilt Cylinder 28000 kPa
Tilt Cylinder, Double Acting - Stroke 555 mm
Engine
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*) 721 N·m
Maximum Rated Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*) 109 kW
Note (2) Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Loader Hydraulic System
Maximum Flow - Implement Pump 150 l/min
Engine
Rated Net Power - 1,600 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) 106 kW
Operating Specifications
Full Turn Tip Load 7870 kg
Loader Hydraulic System
Maximum Working Pressure - Implement Pump 26000 kPa
Transmission
Forward and Reverse - Range 2 13 km/h
Service Refill Capacities
Engine Crankcase 20 l
Steering
Maximum Steering Torque - 0° (Straight Machine) 50375 N·m
Note (1) Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Engine
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*) 694 N·m
Loader Hydraulic System
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time 9.6/10.5 seconds
Steering
Maximum Working Pressure - Steering Pump 24130 kPa
Loader Hydraulic System
Tilt Cylinder, Double Acting - Bore Diameter 130 mm
Power Train
Rear Axle - Traction Aid - Optional Limited slip differential
Engine
Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*) 1600 r/min
Note (3) No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Transmission
Forward and Reverse - Range 3 27 km/h
Loader Hydraulic System
Tilt Cylinder, Double Acting - Rod Diameter 70 mm
Power Train
Note (3) *Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 926M.
Service Refill Capacities
Hydraulic Tank 90 l
Power Train
Front Axle Fixed
Loader Hydraulic System
Lift Cylinder, Double Acting - Rod Diameter 60 mm
Engine
Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*) 107 kW
Loader Hydraulic System
Lift Cylinder, Double Acting - Bore Diameter 110 mm
Steering
Maximum Flow - Steering Pump 130 l/min
Engine
Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) 105 kW
Service Refill Capacities
Hydraulic System - Including Tank 160 l
Transmission
Forward and Reverse - Range 1* 1-13 km/h (0.6-8 mph)
Service Refill Capacities
Cooling System 30 l
Power Train
Rear Axle - Oscillation Angle by Tire Size - 17.5 R25 ± 13.5 degrees
Engine
Maximum Rated Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*) 110 kW
Steering
Steering Cylinder, Double Acting - Bore Diameter 70 mm
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed 2.4 s
Cab
FOPS ISO 3449:2005 LEVEL II
Engine
Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4) 113 kW
Power Train
Note (2) Offset rims available to meet European roading requirements.
Front Axle - Traction Aid* Locking differential (standard)
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65 ± 10.5 degrees
Steering
Steering Cylinder, Double Acting - Rod Diameter 40 mm
Loader Hydraulic System
Maximum Flow - Implement Pump - 4th Function Maximum Flow* 150 l/min
Steering
Note (2) Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Engine
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) 721 N·m
Power Train
Note (1) Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Service Refill Capacities
Rear Axles 21 l
Transmission
Forward and Reverse - Range 4 40 km/h
Steering
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited 2.8 s
Maximum Steering Torque - 40° (Full Turn) 37620 N·m
Loader Hydraulic System
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure 28000 kPa
Service Refill Capacities
Fuel Tank 195 l
Loader Hydraulic System
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure 26000 kPa
Engine
Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4) 694 N·m
Power Train
Brakes - Service Inboard wet disc
Cab
Note (1) *Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab...
Loader Hydraulic System
Lift Cylinder, Double Acting - Stroke 728 mm
Service Refill Capacities
Front Axles 21 l
Loader Hydraulic System
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height) 1.5/1.7 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift) 5.5/6.2 seconds
Note (2) Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Service Refill Capacities
Transmission - Gear Box 8.5 l
Cab
Declared Sound Levels Declared Sound Levels
– Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)*
– Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)*
Power Train
Rear Axle Oscillating
Loader Hydraulic System
Note (1) Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Power Train
Brakes - Parking Spring applied hydraulically released
Transmission
Note * Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).
Loader Hydraulic System
Note (3) * 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.
Engine
Note (1) *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Loader Hydraulic System
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level) 2.6/2.6 seconds
Maximum Flow - Implement Pump - 3rd Function Maximum Flow* 150 l/min
Engine
Maximum Net Torque - ISO 9249:2007 (Standard Power Mode: Range 1-3*) 702 N·m
Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4) 702 N·m
Weights
Note Aggregate Handler machine equipped with side guards and roading fenders.
Operating Specifications
Note Aggregate Handler machine equipped with side guards and roading fenders.
Doriti un sfat sau o recomandare?

Contactati-ne acum!

Sunati-ne
+40747185657
CONTACTATI-NE

STIRI SI NOUTATI