Incarcatoare frontale de talie mica Cat® 926M Waste Handler

The Cat® 926M Waste Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. A complete range of guarding and debris management solutions are available to meet the needs of the most demanding environments. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience the new industry benchmark.

Utilaj nou, second-hand sau de inchiriat, dumneavoastra alegeti!

Efficiently Powerful

Power on Demand

A choice of Power Modes allows you to choose between maximum fuel efficiency or boosted power along with hydraulic speed to get your work done even quicker.

Standard Power Mode

  • Saves up to 10% fuel compared to previous K Series models while running at an efficient 1,600 rpm.
  • Recommended for load and carry to maximize fuel efficiency.
  • Power-by-range logic increases power in speed Range 4 automatically to maximize travel speed and grade climbing performance.
  • Reduces cab sound levels down to a whisper quiet 64 dB(A) typical.

Performance Power Mode

  • Enabled at the push of a button (HP+).
  • Boosts engine power by up to 10% in all speed ranges.
  • Boosts engine speed by over 12%.
  • Increases hydraulic cycle times and productivity.

Six Cylinders of Efficient Power

The Cat® C7.1 engine provides more efficient, quieter operation while delivering superior performance and durability through a high torque, low speed design. The engine meets U.S. EPA Tier 4 Final and EU Stage IV emission standards with a Clean Emissions Module that is designed to manage itself so you can concentrate on your work.

  • No downtime for regeneration with a passive low temperature system that keeps you on the job.
  • Fit for Life Diesel Particulate Filter that is designed to exceed the engine overhaul life.
  • Extended fluid fill intervals with minimal use of Diesel Exhaust Fluid (DEF) with up to four fuel tank fills per DEF fill.
  • Configurable auto idle shut down based on time and ambient temperature to further reduce fuel burn and keep operating costs low.
  • Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test)

Power to the Ground

Lock up and go with fully locking front differential axles that can be engaged on the move at full torque with the pull of a trigger on the seat mounted joystick. Maximize your traction with optional Limited Slip Differential on the rear axle to keep you climbing.

Independent service brakes on front and rear axles provide robust stopping performance while a push button electronic park brake allows you to safely secure the machine with ease.

Customize Your Experience

Work as one with your machine by customizing the controls.

Flexible Power Train

A smooth, step-less electronically controlled hydrostatic transmission provides adjustable power to the ground with excellent groundspeed control and customizable feel.

  • Select your Power Train Mode:
    • Torque Converter (TC) for smooth rollout.
    • Hystat for aggressive engine braking.
    • Default mode which blends the best of Hystat and Torque Converter characteristics.
  • Reduce tire wear using Rimpull control which enables you to match available tractive power to underfoot conditions
  • Set Directional Shift Response, soft and smooth for material handling applications or sharp for aggressive operation.

Adjustable Electro Hydraulic Controls

Easily customize the hydraulic performance through touch screen display to optimize your efficiency.

  • Optimize hydraulic modulation with Fine Mode control when working with forks.
  • Quicker Hydraulic response for fine grading at speed and quick functions through Lift and Tilt response settings.
  • Fully adjustable ride control activation speed along with 3rd function auxiliary flow for powering a roll out bucket.

Operator Profiles and Coded Start

  • The M Series Wheel Loaders will remember you and your personal settings with unique operator codes to make this machine truly yours and keep it secure on the job site.

Application Specific Configuration

Guard Your Investment

Choose from a complete range of optional guarding to protect your machine from the harsh environment of a waste handling application. The machine guarding is purpose built to protect the machine's major components and systems to keep you on the job and maximize production rates.

Breathe Clean

Maximize your engine life and extend filter cleaning intervals with a turbine pre-cleaner. Keep cool with a reversing fan to purge the single plane, widely spaced core cooling package and brush-less sealed alternator. Breath clean with a powered RESPA system for the operator environment designed to eliminate 90% of the particulate in the air and filter the remaining 10%.

Maximize Tire Life

Fine tune your wheel torque to match the underfoot conditions and maximize performance while extending tire life. Cat Waste Handlers feature wheel torque adjustments through an exclusive Rimpull Control feature designed to keep your operating costs low.

Customer Support

Renowned Cat Dealer Support

Rely on your Cat dealer to help you every step of the way with new or used machine sales, rental or rebuild options to meet your business needs.

Maximize your machine uptime with unsurpassed worldwide parts availability, trained technicians and customer support agreements.

Let us earn your business. Experience an M Series Small Wheel Loader and join the Caterpillar family.

Work Made Easy

Optimized Z-bar Linkage

The Caterpillar patented optimized Z-bar linkage combines the digging efficiency of a traditional Z-bar with integrated tool carrier capabilities for great performance and versatility.

  • Perfect Parallelism functionality available in Fork Mode gives truly predictable performance while high tilt forces throughout the working range help you safely and confidently handle loads with precise control.
  • Visibility to bucket corners and fork tips at ground level remain excellent while sight lines at maximum lift are improved with a Generation II lift arm design.

Quick Loading, Performance Series Buckets

Performance Series Buckets deliver up to 10% higher fill factors and better material retention for significant productivity and fuel efficiency improvements. The buckets feature a longer floor to take a bigger bite of the pile, an open throat to heap higher and curved side bars to help with material retention. This optimized shape is echoed across the General Purpose, Light Material, and High Dump bucket families.

Smooth and Predictable Multi-Function Performance

M Series machines feature an electro-hydraulic control system that is governed by the Intelligent Power Management system for peak efficiency. The load-sensing, variable flow system senses work demand and adjusts flow and pressure to match the operators request.

  • Multi-Function without compromise through Caterpillar's exclusive dedicated hydraulic systems featuring three pumps:
    • 1st pump for Intelligent Hydrostatic drive
    • 2nd pump for implements
    • 3rd pump for steering system
Drive, Lift and Steer simultaneously with smooth predictable control. The M Series simply does what you ask it to.
  • Programmable in-cab kick-outs are easy to set on the go for tilt, lower and lift. This feature is ideal for applications where the work cycle is repeatable allowing you to quickly return to programed set points such as ground and level.
  • Fine tune hydro-mechanical performance with fully adjustable 3rd function flow through the touch screen display (when equipped) for a perfect marriage between machine and attachments.

Enjoy All Day Comfort

Have a Seat and Experience:

  • Seat-mounted controls featuring a low effort joystick for lift and tilt functions along with integrated Forward/Neutral/Reverse switch, differential lock trigger and optional third and fourth auxiliary functions.
  • Superior all around visibility with single piece front windshield, new parabolic external mirrors, redesigned Generation II linkage and clean hydraulic lines routing.
  • Automatic climate control with heated rear glass and external mirrors for a quick defrost.
  • Fully adjustable controls including steering column, joystick and seat suspension.
  • Information at a glance with large primary LCD display and optional full color touch screen display.
  • An extra eye on the job site with optional integrated rear object detection and optional* rearview camera.
  • A heated and cooled seat option for added comfort in a wide range of climates.
*Standard in Europe.

An easy day at work with:

  • A spacious, safe, quiet operator environment featuring ergonomic controls, seat belt notification and optional Bluetooth™ radio with integrated microphone plus an auxiliary port.
  • Easy access to vital machine parameters with the optional touch screen display that works in conjunction with the standard soft touch panel to allow real time adjustments to machine features and an integrated help button with over 25 languages.
  • Comfortable soft stops at cylinder end stroke conditions and programmable kickout points with Caterpillar's exclusive electro-hydraulic cylinder snubbing.
  • An even smoother ride with optional Ride Control when working unloaded and loaded with excellent material retention.
  • Early starts and late finishes are made easier with optional LED lighting package that includes engine compartment lighting to illuminate the way for checking oil, and coolant level along with refueling the machine in dark conditions.

Configured for Success

The Way You Want It

A complete range of optional equipment and work tools gives you the versatility to configure a Waste Handler to be successful in your business. Get with your Caterpillar dealer to configure yours.

Guards:

  • Windshield
  • Tilt cylinder
  • Lights
  • Fender deflectors
  • Drive shaft
  • Hitch
  • Steering cylinders
  • Side power train
  • Lower power train
  • Crank case

Debris Packages:

  • Reversing fan
  • Sealed alternator
  • Turbine precleaner
  • RESPA precleaner

Work Tools:

  • Full range of tools

Operator Environment:

  • Seat, deluxe or premium
  • Deluxe cab (with touch screen display)

Other Options:

  • Autolube
  • High lift linkage
  • Coupler: Fusion™ and ISO 23727
  • Auxiliary hydraulics: 3rd and 4th
  • Window washing access
  • Ride control
  • Fenders: extended and full coverage
  • Counterweights
  • Cold start package
  • Rear object detection
  • Blue Angel certification
  • Beacon
  • LED auxiliary lights
  • CPM – Cat Production Measurement
  • TPM – Tire Pressure Monitoring

Specificatii tehnice

SPECIFICATII TEHNICE

Engine
Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance [HP+] Power Mode: Range 1-4) 110 kW
Maximum Rated Gross Power - ISO 14396 (DIN) 114 kW
Maximum Rated Gross Power - ISO 14396 114 kW
Maximum Rated Gross Power - Maximum Engine Speed (Performance [HP+] Power Mode: Range 1-4) 1800 r/min
Maximum Rated Gross Power - ISO 14396 (DIN) (Performance [HP+] Power Mode: Range 1-4) 114 kW
Maximum Rated Gross Power - ISO 14396 (Performance [HP+] Power Mode: Range 1-4) 114 kW
Rated Net Power - 1,800 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance [HP+] Power Mode: Range 1-4) 111 kW
Engine Model Cat® C7.1
Buckets
Bucket Capacities 3.0-5.0 m3 (3.9-6.5 yd3)
Weights
Operating Weight 14175 kg
Engine
Maximum Gross Power 114 kW
Bore 105 mm
Stroke 135 mm
Displacement 7.01 l
Cab
ROPS ISO 3471: 2008
FOPS ISO 3449: 2005 LEVEL II
Steering
Maximum Flow - Steering Pump 130 l/min
Power Train
Front Axle - Traction Aid* Locking differential (standard)
Steering
Steering Cylinder, Double Acting - Bore Diameter 70 mm
Service Refill Capacities
Hydraulic Tank 90 l
Steering
Maximum Steering Torque - 40° (Full Turn) 37620 N·m
Engine
Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) 105 kW
Emissions Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode: Range 1-3*) 702 N·m
Service Refill Capacities
Fuel Tank 195 l
Engine
Maximum Gross Torque - ISO 14396 (Performance [HP+] Power Mode: Range 1-4) 721 N·m
Loader Hydraulic System
Maximum Flow - Implement Pump - 3rd Function* 150 l/min
Cab
Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)* 68 dB(A)
Service Refill Capacities
Engine Crankcase 20 l
Engine
Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*) 106 kW
Loader Hydraulic System
Tilt Cylinder, Double Acting - Stroke 555 mm
Operating Specifications
Full Turn Tip Load 7376 kg
Engine
Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance [HP+] Power Mode: Range 1-4) 111 kW
Loader Hydraulic System
Note (3) *3rd function flow is fully adjustable from 20% to 100% of maximum flow through the touch screen display when equipped.
Engine
Note (2) Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Power Train
Rear Axle - Oscillation Angle by Tire Size - 17.5 R25 ± 13.5 degrees
Engine
Note (4) Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).
Rated Net Power - 1,600 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) 106 kW
Service Refill Capacities
Cooling System 30 l
Steering
Maximum Steering Torque - 0° (Straight Machine) 50375 N·m
Engine
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*) 721 N·m
Power Train
Note (1) Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Brakes - Service Inboard wet disc
Steering
Maximum Working Pressure - Steering Pump 24130 kPa
Loader Hydraulic System
Maximum Working Pressure - Implement Pump 26000 kPa
Engine
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Performance [HP+] Power Mode: Range 1-4) 702 N·m
Steering
Note (1) Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Service Refill Capacities
Front Axles 21 l
Hydraulic System - Including Tank 160 l
Power Train
Brakes - Parking Spring applied hydraulically released
Transmission
Forward and Reverse - Range 4 40 km/h
Forward and Reverse - Range 1* 1-13 km/h (0.6-8 mph)
Engine
Note (1) *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Power Train
Note (3) *Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 926M.
Service Refill Capacities
Diesel Exhaust Fluid (DEF) Tank 19 l
Transmission - Gear Box 8.5 l
Cab
Note (1) *Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab...
Transmission
Forward and Reverse - Range 2 13 km/h
Engine
Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4) 694 N·m
Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*) 1600 r/min
Loader Hydraulic System
Lift Cylinder, Double Acting - Rod Diameter 60 mm
Note (1) Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Steering
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed 2.4 s
Cab
Note (2) The Blue Angel environmental label is an optional attachment for Europe only.
Power Train
Front Axle Fixed
Engine
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*) 694 N·m
Cab
Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)* 101 dB(A)
Steering
Steering Cylinder, Double Acting - Rod Diameter 40 mm
Note (2) Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited 2.8 s
Engine
Maximum Rated Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*) 109 kW
Loader Hydraulic System
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift) 5.5/6.2 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level) 2.6/2.6 seconds
Maximum Flow - Implement Pump 150 l/min
Steering
Steering Cylinder, Double Acting - Stroke 438 mm
Transmission
Note *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the touch screen display when equipped. Factory default is 7 km/h (4.4 mph).
Service Refill Capacities
Rear Axles 21 l
Loader Hydraulic System
Relief Pressure - Tilt Cylinder - 3rd Function Relief Pressure 28000 kPa
Tilt Cylinder, Double Acting - Bore Diameter 130 mm
Tilt Cylinder, Double Acting - Rod Diameter 70 mm
Power Train
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65 ± 10.5 degrees
Rear Axle - Traction Aid - Optional Limited slip differential
Transmission
Forward and Reverse - Range 3 27 km/h
Loader Hydraulic System
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure 26000 kPa
Lift Cylinder, Double Acting - Stroke 728 mm
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time 9.6/10.5 seconds
Power Train
Rear Axle Oscillating
Note (2) Offset rims available to meet European roading requirements.
Loader Hydraulic System
Note (2) Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Engine
Note (3) No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Loader Hydraulic System
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height) 1.5/1.7 seconds
Relief Pressure - Tilt Cylinder 28000 kPa
Engine
Maximum Rated Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*) 109 kW
Loader Hydraulic System
Lift Cylinder, Double Acting - Bore Diameter 110 mm
Doriti un sfat sau o recomandare?

Contactati-ne acum!

Sunati-ne
+40747185657
CONTACTATI-NE

STIRI SI NOUTATI