Incarcatoare frontale de talie mica Cat® 938M pentru deseuri

Incarcatorul Caterpillar 938M pentru deseuri stabileste standardul pentru productivitate, eficienta consumului de combustibil si confort pentru operator. Motorul C7.1 cu un cuplu ridicat si turatie joasa, impreuna cu un grup motopropulsor hidrostatic inteligent, asigura un consum eficient de combustibil. O gama completa de protectii si solutii de gestionare a reziduurilor este disponibila pentru a putea lucra in cele mai solicitante medii. Nivelurile de zgomot extrem de scazute, cabina spatioasa si comenzile intuitive va permit sa lucrati confortabil toata ziua, si chiar toata noaptea! Testati acum noul standard in domeniu!

Utilaj nou, second-hand sau de inchiriat, dumneavoastra alegeti!

Eficienta si putere

Motorul Cat® C7.1 are o functionare mai curata si mai silentioasa, performante si durabilitate superioare datorita cuplului mare si turatiei reduse. Sistemul Cat, exclusiv, de gestionare inteligenta a puterii monitorizeaza comenzile operatorului si puterea disponibila, pentru a mentine utilajul in functiune la eficienta maxima si pentru a oferi operatorului mai multe posibilitati de setare in functie de aplicatia specifica.

Gama de moduri de putere va permite sa alegeti intre eficienta maxima a consumului de combustibil sau putere crescuta si viteza hidraulica.

MODUL STANDARD

  • Economiseste combustibil si reduce nivelul sonor din cabina
  • Cele mai mari avantaje se observa in timpul aplicatiilor de incarcare si transport, de deszapezire si in aplicatiile rutiere

MODUL PERFORMANTA
  • Activat prin simpla apasare (HP+), creste puterea motorului cu pana la 10% si turatia motorului cu peste 12%
  • Creste durata ciclului hidraulic si productivitatea

Blocati si porniti la lucru cu diferentialul complet blocabil pe fata, actionat din mers, la cuplu maxim. Maximizati tractiunea cu diferentialul cu alunecare limitata pe puntea din spate, optional, pentru putere in panta.

Confort intreaga zi

Un mediu de operare spatios, silentios si confortabil va ajuta sa ramaneti relaxat si productiv pe tot parcursul zilei. Va bucurati de vizibilitate superioara la 360 de grade datorita parbrizului monobloc, articulatiei reproiectate si montajului simplificat al furtunurilor hidraulice. Comenzile montate pe scaun cu joystick pentru functii de ridicare si inclinare, alaturi de un comutator integrat de inaintare/neutru/marsarier, declansatoare pentru blocarea diferentialului, precum si comenzi optionale pentru cea de-a treia si cea de-a patra functie hidraulica.

  • Control automat al climatizarii cu incalzire la geamul din spate si oglinzile exterioare
  • Informatii rapide pe ecranul LCD mare
  • Scaun cu sistem de incalzire si racire, optional
  • Sistem antitangaj, optional
  • Amortizare electrohidraulica a cilindrului la cap de cursa
  • Vizibilitate suplimentara pe santier datorita camerei retrovizoare optionale* si sistemului optional integrat de detectare a obiectelor din spatele utilajului
*Standard in Europa.

Asistenta pentru clienti

Bazati-va pe dealerul dvs. Cat pentru a va ajuta la fiecare pas cu optiuni de vanzare, inchiriere sau reconditionare de utilaje noi sau rulate, pentru a raspunde nevoilor afacerii dvs..

Maximizati timpii de functionare ai utilajului dvs. cu piese disponibile la nivel global, tehnicieni calificati si contracte de asistenta pentru clienti.

Permiteti-ne sa va optimizam activitatea. Testati un incarcator pe roti de talie mica din seria M si alaturati-va familiei Caterpillar.

Configuratii specifice pentru aplicatii

PROTEJATI-VA INVESTITIA
Alegeti dintr-o gama completa de protectii optionale pentru a va proteja utilajul de mediul dur al aplicatiilor de manipulare a deseurilor. Aparatorile sunt concepute pentru a proteja componentele si sistemele principale ale utilajului, pentru a asigura continuitatea lucrului si optimizarea productiei.

UN AER SANATOS
Maximizati durata de viata a motorului si extindeti intervalele de curatare a filtrului cu un pre-filtru cu turbina. Pastrati aerul curat cu un ventilator reversibil, care curata unitatea de racire si alternatorul capsulat fara perii. Curatati aerul din cabina operatorului cu sistemul RESPA conceput pentru a elimina 90% din particulele din aer si pentru a filtra restul de 10%.

MAXIMIZATI DURATA DE VIATA A ANVELOPELOR
Reglati cuplul rotii in functie de conditiile de la sol si maximizati performanta, prelungind durata de viata a anvelopelor. La incarcatoarele Cat pentru deseuri, cuplul rotii este reglat de functia unica Rimpull Control (forta de frecare) conceputa pentru a reduce costurile de operare.

Service

Incepeti lucrul rapid datorita accesului la punctele de service de la nivelul solului si iluminarii optionale a compartimentului motorului. Cele trei usi mari de service ofera acces complet la filtre si punctele de service. Intervalele de service extinse pentru filtrele hidraulice si ale grupului motopropulsor reduc timpul de intretinere si maximizeaza timpul de functionare. Functiile de service suplimentare includ:

  • Product Link™ PRO standard cu abonament optional la VisionLink®.
  • Memento-uri de intretinere afisate pe ecranul secundar la intervale programate.
  • Filtru de particule diesel conceput pentru o durata de viata extra-lunga.
  • Serviciu de filtrare rapida a combustibilului cu pompa electrica de amorsare a combustibilului de la Caterpillar.
  • Contacte pentru surse externe de curent (pentru pornire de urgenta) echipate standard.
  • Sistem de racire pentru curatare indelungata, si racitoare cu 6 ventilatoare pe inch, echipate standard.
  • Lubrifiere automata integrata (optional) cu frecventa de ungere reglabila.

Experienta personalizata

Incarcatoarele pe roti pentru deseuri din seria M pastreaza in memorie setarile dvs. personale datorita codurilor unice de operator, pentru a spori siguranta utilajului.

Puteti adapta comenzile utilajului la nevoile dvs. specifice.

  • Selectati modul de putere al motorului
  • Reduceti uzura anvelopelor folosind functia Rimpull Control (forta de frecare)
  • Optimizati viteza la sol cu functia Creeper Control (controlul fluajului)
  • Comenzi electro-hidraulice reglabile
  • Setati directia de deplasare in functie de aplicatia executata

Specificatii tehnice

SPECIFICATII TEHNICE

Engine
Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance [HP+] Power Mode: Range 1-4) 136 kW
Maximum Rated Gross Power - ISO 14396 (Performance [HP+] Power Mode: Range 1-4) 140 kW
Maximum Rated Gross Power - ISO 14396 (DIN) 140 kW
Rated Net Power - 1,800 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance [HP+] Power Mode: Range 1-4) 137 kW
Maximum Rated Gross Power - ISO 14396 (DIN) (Performance [HP+] Power Mode: Range 1-4) 140 kW
Maximum Rated Gross Power - ISO 14396 140 kW
Engine Model Cat® C7.1
Maximum Rated Gross Power - Maximum Engine Speed (Performance [HP+] Power Mode: Range 1-4) 1800 r/min
Buckets
Bucket Capacities 3.0-5.0 m3 (3.9-6.5 yd3)
Weights
Operating Weight 17493 kg
Engine
Maximum Gross Power 142 kW
Bore 105 mm
Stroke 135 mm
Displacement 7.01 l
Cab
ROPS ISO 3471: 2008
FOPS ISO 3449: 2005 LEVEL II
Steering
Maximum Steering Torque - 0° (Straight Machine) 57630 N·m
Service Refill Capacities
Rear Axles 35 l
Cab
Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)* 101 dB(A)
Engine
Note (2) Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Steering
Maximum Steering Torque - 40° (Full Turn) 42570 N·m
Power Train
Note (1) Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Loader Hydraulic System
Lift Cylinder, Double Acting - Rod Diameter 65 mm
Service Refill Capacities
Fuel Tank 195 l
Loader Hydraulic System
Tilt Cylinder, Double Acting - Rod Diameter 90 mm
Engine
Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4) 843 N·m
Loader Hydraulic System
Relief Pressure - Tilt Cylinder 30000 kPa
Engine
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode: Range 1-3*) 852 N·m
Power Train
Front Axle - Traction Aid* Locking differential (standard)
Engine
Maximum Rated Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*) 129 kW
Service Refill Capacities
Transmission - Gear Box 11 l
Engine
Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*) 1600 r/min
Service Refill Capacities
Hydraulic System - Including Tank 170 l
Loader Hydraulic System
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure 28000 kPa
Steering
Maximum Working Pressure - Steering Pump 24130 kPa
Loader Hydraulic System
Note (1) Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Maximum Flow - Implement Pump 190 l/min
Engine
Maximum Rated Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*) 129 kW
Power Train
Rear Axle Oscillating
Service Refill Capacities
Engine Crankcase 20 l
Loader Hydraulic System
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift) 5.5/6.2 seconds
Transmission
Forward and Reverse - Range 2 13 km/h
Power Train
Note (3) *Differential front locking axle can be engaged on the go at full torque to 20 km/h (12.4 mph) on the 938M.
Steering
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed 2.3 s
Steering Cylinder, Double Acting - Bore Diameter 80 mm
Power Train
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65 ± 10.5 degrees
Loader Hydraulic System
Maximum Flow - Implement Pump - 3rd Function* 190 l/min
Lift Cylinder, Double Acting - Stroke 789 mm
Steering
Steering Cylinder, Double Acting - Stroke 399 mm
Loader Hydraulic System
Note (2) Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Steering
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited 3.1 s
Cab
Note (1) *Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab...
Engine
Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance [HP+] Power Mode: Range 1-4) 137 kW
Rated Net Power - 1,600 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) 126 kW
Power Train
Rear Axle - Traction Aid - Optional Limited slip differential
Transmission
Forward and Reverse - Range 4 40 km/h
Power Train
Rear Axle - Oscillation Angle by Tire Size - 23.5 R25 ± 7 degrees
Transmission
Note *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the touch screen display when equipped. Factory default is 7 km/h (4.4 mph).
Service Refill Capacities
Diesel Exhaust Fluid (DEF) Tank 19 l
Loader Hydraulic System
Relief Pressure - Tilt Cylinder - 3rd Function Relief Pressure 30000 kPa
Lift Cylinder, Double Acting - Bore Diameter 120 mm
Engine
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*) 879 N·m
Service Refill Capacities
Front Axles 35 l
Engine
Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*) 126 kW
Transmission
Forward and Reverse - Range 3 27 km/h
Engine
Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) 125 kW
Cab
Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)* 68 dB(A)
Loader Hydraulic System
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time 9.7/10.6 seconds
Operating Specifications
Full Turn Tip Load 9843 kg
Engine
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*) 843 N·m
Steering
Note (1) Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Service Refill Capacities
Cooling System 32 l
Engine
Note (4) Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).
Loader Hydraulic System
Maximum Working Pressure - Implement Pump 28000 kPa
Engine
Note (3) No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Service Refill Capacities
Hydraulic Tank 90 l
Loader Hydraulic System
Tilt Cylinder, Double Acting - Bore Diameter 150 mm
Note (3) *3rd function flow is fully adjustable from 20% to 100% of maximum flow through the touch screen display when equipped.
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level) 2.7/2.7 seconds
Engine
Emissions Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Steering
Steering Cylinder, Double Acting - Rod Diameter 50 mm
Loader Hydraulic System
Tilt Cylinder, Double Acting - Stroke 555 mm
Steering
Maximum Flow - Steering Pump 130 l/min
Engine
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Performance [HP+] Power Mode: Range 1-4) 852 N·m
Maximum Gross Torque - ISO 14396 (Performance [HP+] Power Mode: Range 1-4) 879 N·m
Note (1) *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Cab
Note (2) The Blue Angel environmental label is an optional attachment for Europe only.
Transmission
Forward and Reverse - Range 1* 1-13 km/h (0.6-8 mph)
Power Train
Brakes - Service Outboard wet disc
Steering
Note (2) Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Power Train
Note (2) Offset rims available to meet European roading requirements.
Brakes - Parking Spring applied hydraulically released
Front Axle Fixed
Loader Hydraulic System
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height) 1.5/1.7 seconds
Doriti un sfat sau o recomandare?

Contactati-ne acum!

Sunati-ne
+40747185657
CONTACTATI-NE

STIRI SI NOUTATI