Miniexcavatoare Cat® 302.7D CR

302.7D CR Mini Hydraulic Excavator

Utilaj nou, second-hand sau de inchiriat, dumneavoastra alegeti!

Performance and Durability: Powerful hydraulics – Robust construction – Work tool ready

Auxiliary Hydraulics as Standard Fit

Machine is ‘ready to work.’ Hammer and two way lines complete with quick disconnect fittings are standard. Connections are located close to the tool to reduce hose lengths and any potential damage.

Additional lines options are available to further increase machine versatility.

Stick and bucket cylinder hoses are protected by routing them through the boom.

100% Pilot Controls

Delivers excellent machine control and lifetime ‘as new’ performance eliminating the need for linkage and cable maintenance.

Automatic Swing Lock

Safe transportation of the machine is aided by the Cat automatic swing lock which locks the machines upper body in place when the control console is raised or the engine is stopped.

Thumb Ready Stick (North American Builds)

Machine is configured with brackets and relief valves for simple and cost effective mounting of a hydraulic thumb.

Dozer Float

Ground levelling and finishing applications are fast and easier with the dozer float function engaged making site clean-up much more efficient.

Customer Support: Low operating costs with excellent services and options

Customer Support

Product supported through the Cat dealer and worldwide parts network aimed at minimizing downtime.

  • Finance options
  • Warranty options
  • Maintenance contracts
Help and advice in product and option selection to maximize efficiency and operating profitability

Work Tools

A range of tools is available to take advantage of the machines versatility. All tools are matched to the machine to optimize performance and deliver excellent value through high productivity and long life.

Serviceability/Maintenance: Easy access for both maintenance and daily inspection

Pivot Bushing

Steel bushings are fitted on all front linkage pivot points including the swing casting, boom, stick and bucket. Designed for long life and easy replacement.

Maintenance Access

Removable covers in the cab and at the rear of the machine provide easy access to hydraulic system components.

Side Mounted Engine

All daily service points are easily accessed through the large side cover. The engine position also reduces heat and noise transfer into the operator station (cab).

Compact Dimensions: Reduced damage – Operator confidence – Increased productivity

Compact Radius

Configured without the additional counterweight the 302.7D CR is a true zero tail swing machine with the upper body staying within the width of the undercarriage during rotation. This enables the operator to work within confined areas and concentrate on the work being performed without having to worry about the back of the machine.

Transport Weight

The 302.7D CR is designed with a transport weight below 2.7 tonnes (6,000 lb) with cab fitted.

This allows lower trailer transportation costs using a standard passenger vehicle (subject to national restrictions).

Additional Counterweight

An optional additional weight increases the machines lifting capability with only a small addition to the overhang.

An optional additional counterweight increases the machines lifting capacity with only a small addition to the overhang.

(This counterweight is fitted as standard for North America and Australia)

User Friendly Operation: Comfortable productivity

Cab Comfort

The Cat® 302.7D CR gives the operator a large comfortable space in which to work. The ergonomic control layout, travel pedals and adjustable wrist rests are engineered to minimize operator fatigue and increase productivity.

Simultaneous Operation

Both machine upper body swing and boom offset can be controlled simultaneously for faster machine positioning and object handling.

Adjustable Flow Control

Machines configured with proportional auxiliary hydraulics include adjustable hydraulic flow control for even greater tool control. Especially useful with tools such as angling buckets.

Split Front Window

The lower front window section slides into the upper section frame. Both sections are then raised and stored in the roof using a gas assisted mechanism.

This allows the operator to position the front window to suit their visibility and ventilation requirements with easy storage.

Specificatii tehnice


Net Power 15.2 kW
Engine Model Yanmar 3TNV76
Gross Power 17.9 kW
Rated Net Power - ISO 9249 15.2 kW
Displacement 1115 cm³
Note Engine meets U.S. EPA Tier 4 Final/EU Stage V emission standards.
Operating Weight 2830 kg
Operating Weight - With Cab 2830 kg
Operating Weight - With Canopy 2737 kg
Maximum Dig Height 4170/4300 mm (13 ft 8 in/14 ft 1 in)
Maximum Digging Depth 2544/2744 mm (8 ft 4 in/9 ft 0 in)
Tail Swing Radius 760 mm
Boom Swing Angle - Left 75 °
Height 2408 mm
Transport Length - Arm Lowered 4255 mm
Maximum Dozer Dig Depth 419 mm
Length - Undercarriage 2006 mm
Track Width 764 mm
Minimum Front Linkage Swing Radius 533 mm
Width 1570 mm
Maximum Dozer Lift Height 380 mm
Maximum Reach - Ground Level 4481/4681 (14 ft 8 in/15 ft 5 in)
Boom Swing Angle - Right 50 °
Maximum Vertical Dig Depth 1962/2152 mm (6 ft 5 in/7 ft 1 in)
Maximum Reach 4613/4805 mm (15 ft 1 in/15 ft 10 in)
Maximum Dumping Height 2840/2970 mm (9 ft 4 in/9 ft 8 in)
Travel System
Gradeability 30°/58%
Travel Speed 2.1 km/h/3.8 km/h (1.30 mph/2.36 mph)
Hydraulic System
Operating Pressure - Equipment 225 bar
Operating Pressure - Travel 225 bar
Operating Pressure - Swing 206 bar
Maximum Stick Force - Standard/Long 15.4 kN/13.6 kN (3,462 lbf/3,057 lbf)
Auxiliary Circuits - Secondary 30.8 L/min at 206 bar (8.1 gal/min at 2,988 psi)
Pump Flow at 2,500 rpm 89.4 l/min
Maximum Bucket Force 22.5 kN
Auxiliary Circuits - Primary 52.2 L/min at 225 bar (13.8 gal/min at 3,263 psi)
Width 1570 mm
Height 290 mm
Dig Depth 419 mm
Lift Height 380 mm
Service Refill Capacities
Fuel Tank Capacity 35.2 l
Hydraulic Tank Capacity 26.5 l
Doriti un sfat sau o recomandare?

Contactati-ne acum!