Miniincarcatoare compacte pe senile Cat® 239D3

Miniincarcatorul compact pe senile Cat® 239D3 dispune de un sistem cu ridicare radiala, care asigura performante excelente si o putere exceptionala a barei de tractiune. Trenul de rulare suspendat, standard, asigura capacitati superioare de tractiune, flotatie, stabilitate si viteza intr-o varietate de aplicatii si conditii de sol.

Utilaj nou, second-hand sau de inchiriat, dumneavoastra alegeti!

SILENTIOS SI CONFORTABIL

Cabina inchisa etans si presurizata, unica in industrie, ofera operatorului un mediu de operare mai curat si mai silentios, cu o vizibilitate excelenta asupra uneltei de lucru. Continuand tendinta lansata in industrie, seria D3 include, standard, si comenzi pe joystick-ul montat pe scaun, reglabil, pentru un confort sporit.

DEPLASARE UNIFORMA

O suspensie cu bare de torsiune independente, standard, combinata cu sistemul optional de suspensii active sensibil la viteza imbunatateste functionarea pe teren accidentat, pentru o capacitate de retinere a sarcinii mai buna, productivitate crescuta si un plus de confort.

CAPACITATE OPTIMIZATA A UTILAJULUI

Maximizati capacitatea si controlul asupra utilajului cu Ecranul Avansat disponibil, pentru reglaje direct de pe ecran la atasamente, la sistemul hidrostatic si controlul fluajului. in plus, utilajul dispune de setari in mai multe limbi, configuratii personalizabile, sistem de securitate si camera retrovizoare.

PERFORMANTA MAXIMA

Grupul motopropulsor de inalta performanta asigura rezultate si capacitati de productie maxime datorita Sistemului Electronic de Control al Cuplului motor, sistemului de deplasare standard cu doua viteze si acceleratiei electronice de mana/picior cu pedala de decelerare.

OPERARE MAI USOARA

Sistemul Cat® de „Nivelare Inteligenta” ofera tehnologii de top din industrie, integrare si functii precum mentinerea electronica a pozitiei cupei, revenirea uneltei de lucru la pozitia de incarcare si un dispozitiv de pozitionare a uneltei de lucru.

Specificatii tehnice

SPECIFICATII TEHNICE

Engine
Gross Power - SAE J1995 50.1 kW
Operating Specifications
Rated Operating Capacities - 35% Tipping Load 695 kg
Weights
Operating Weight 3372 kg
Dimensions
Vehicle Width (320 mm/12.6 in tracks) 1676 mm
Ground Clearance 195 mm
Length - With Bucket on Ground 3234 mm
Length - Without Bucket 2522 mm
Maximum Reach - With Arms Parallel to Ground 1356 mm
Turning Radius from Center - Bucket 2069 mm
Overall Length - Track 1808 mm
Reach - Maximum Lift/Dump 563 mm
Vehicle Width (400 mm/15.7 in tracks) 1756 mm
Maximum Overall Height 3645 mm
Bucket Pin Height - Carry Position 218 mm
Length - Track on Ground 1384 mm
Clearance at Maximum Lift and Dump 2057 mm
Bucket Pin Height - Maximum Lift 2825 mm
Departure Angle 34.5°
Rack Back Angle - Maximum Height 85.5°
Turning Radius from Center - Coupler 1159 mm
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery,...
Height - Top of Cab 2034 mm
Maximum Dump Angle 50.3°
Turning Radius from Center - Machine Rear 1458 mm
Operating Specifications
Tipping Load 1985 kg
Breakout Force - Tilt Cylinder 1775 kg
Rated Operating Capacity with Optional Counterweight 1090 kg
Ground Contact Area - With 320 mm/12.6 in Track 0.89 m²
Ground Pressure - With 320 mm/12.6 in Track 37.3 kPa
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery,...
Ground Contact Area - With 400 mm/15.7 in Track 1.11 m²
Ground Pressure - With 400 mm/15.7 in Track 30.6 kPa
Hydraulic System
Hydraulic Flow - High Flow - Loader Hydraulic Flow 99 l/min
Hydraulic Flow - Standard - Loader Hydraulic Pressure 23000 kPa
Hydraulic Flow - Standard - Loader Hydraulic Flow 69 l/min
Hydraulic Flow - High Flow - Loader Hydraulic Pressure 23000 kPa
Hydraulic Flow - High Flow - Hydraulic Power (Calculated) 38 kW
Hydraulic Flow - Standard - Hydraulic Power (Calculated) 26.5 kW
Cab
ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level I
Power Train
Travel Speed - Forward or Reverse - Two Speed 12.2 km/h
Travel Speed - Forward or Reverse - One Speed 8.1 km/h
Service Refill Capacities
Cooling System 12 l
Engine Crankcase 10 l
Fuel Tank 57 l
Hydraulic System 45 l
Hydraulic Tank 34 l
Engine
Displacement 2.2 l
Bore 84 mm
Stroke 100 mm
Weights
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery,...
Operating Specifications
Rated Operating Capacities - 50% Tipping Load 995 kg
Engine
Peak Torque - 1,500 rpm - SAE J1995 208 N·m
Net Power - SAE 1349 49.1 kW
Noise Level
Note (2) **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling...
Engine
Net Power - ISO 9249 49.6 kW
Noise Level
Outside Cab*** 103 dB(A)
Note (3) ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Engine
Engine Model Cat C2.2 CRDI
Net Power 49.1 kW
Noise Level
Inside Cab** 83 dB(A)
Air Conditioning System (if equipped)
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Doriti un sfat sau o recomandare?

Contactati-ne acum!

Sunati-ne
+40747185657
CONTACTATI-NE

STIRI SI NOUTATI