Miniincarcatoare compacte pe senile Cat® 299D3 XE

Miniincarcatorul compact pe senile Cat 299D3 XE cu motorul sau puternic, sistemul hidraulic performant, capacitati de ridicare superioare, sistem cu ridicare verticala si suspensia cu bare de torsiune, asigura performante maxime pentru productivitatea uneltei de lucru, excavare, incarcarea camioanelor si manipularea materialelor, intr-o varietate de aplicatii si conditii de sol.

Utilaj nou, second-hand sau de inchiriat, dumneavoastra alegeti!

SILENTIOS SI CONFORTABIL

Cabina inchisa etans si presurizata, unica in industrie, ofera operatorului un mediu de operare mai curat si mai silentios, cu o vizibilitate excelenta asupra uneltei de lucru. Continuand tendinta lansata in industrie, seria D3 include, standard, si comenzi pe joystick-ul montat pe scaun, reglabil, pentru un confort sporit.

DEPLASARE UNIFORMA

O suspensie cu bare de torsiune independente, standard, combinata cu sistemul optional de suspensii active sensibil la viteza imbunatateste functionarea pe teren accidentat, pentru o capacitate de retinere a sarcinii mai buna, productivitate crescuta si un plus de confort.

CAPACITATE OPTIMIZATA A UTILAJULUI

Maximizati capacitatea si controlul asupra utilajului cu Ecranul Avansat disponibil, pentru reglaje direct de pe ecran la atasamente, la sistemul hidrostatic si controlul fluajului. in plus, utilajul dispune de setari in mai multe limbi, configuratii personalizabile, sistem de securitate si camera retrovizoare.

PERFORMANTA MAXIMA

Grupul motopropulsor de inalta performanta asigura rezultate si capacitati de productie maxime datorita Sistemului Electronic de Control al Cuplului motor, sistemului de deplasare standard cu doua viteze si acceleratiei electronice de mana/picior cu pedala de decelerare.

OPERARE MAI USOARA

Sistemul Cat® de „Nivelare Inteligenta” ofera tehnologii de top din industrie, integrare si functii precum mentinerea electronica a pozitiei cupei, revenirea uneltei de lucru la pozitia de incarcare si un dispozitiv de pozitionare a uneltei de lucru.

Specificatii tehnice

SPECIFICATII TEHNICE

Engine
Gross Power - SAE J1995 82 kW
Operating Specifications
Rated Operating Capacities - 35% Tipping Load 1620 kg
Weights
Operating Weight 5333 kg
Dimensions
Length - Track on Ground 1767 mm
Overall Length - Track 2270 mm
Height - Top of Cab 2125 mm
Ground Clearance 245 mm
Departure Angle 33°
Maximum Dump Angle 54°
Maximum Overall Height 4032 mm
Bucket Pin Height - Carry Position 180 mm
Turning Radius from Center - Coupler 1476 mm
Reach - Maximum Lift/Dump 852 mm
Length - Without Bucket 3189 mm
Turning Radius from Center - Machine Rear 1881 mm
Turning Radius from Center - Bucket (racked) 2314 mm
Bucket Pin Reach - Maximum Lift 493 mm
Clearance at Maximum Lift and Dump 2399 mm
Rack Back Angle - Maximum Height 81°
Vehicle Width (400 mm/15.7 in tracks) 1931 mm
Bucket Pin Height - Maximum Lift 3208 mm
Length - With Bucket on Ground 3931 mm
Maximum Reach - With Arms Parallel to Ground 1319 mm
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1...
Hydraulic System
Standard Flow Mode - Loader Hydraulic Pressure 23000 kPa
Note *When equipped with Cat 400 Series work tools.
Standard Flow Mode - Hydraulic Power - Calculated 33 kW
Standard Flow Mode - Loader Hydraulic Flow 86 l/min
Hydraulic Flow - XE - Hydraulic Power (calculated) 70 kW
Hydraulic Flow - XE - Maximum Loader Hydraulic Flow* 150 l/min
Hydraulic Flow - XE - Maximum Loader Hydraulic Pressure 28000 kPa
Cab
ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level I
Power Train
Travel Speed - Forward or Reverse - One Speed 8.4 km/h
Travel Speed - Forward or Reverse - Two Speed 13.5 km/h
Service Refill Capacities
Cooling System 16 l
Engine Crankcase 13 l
Fuel Tank 120 l
Hydraulic System 55 l
Hydraulic Tank 39 l
Diesel Exhaust Fluid (DEF) Tank 19 l
Engine
Net Power - SAE 1349 79 kW
Displacement 3.8 l
Bore 100 mm
Stroke 120 mm
Net Power - ISO 9249 80 kW
Net Power 79 kW
Peak Torque - 1,500 rpm - SAE J1995 374 N·m
Engine Model Cat C3.8 DIT (turbo)
Operating Specifications
Ground Contact Area 1.41 m²
Ground Pressure 37.3 kPa
Tipping Load 4625 kg
Breakout Force - Tilt Cylinder 3298 kg
Breakout Force - Lift Cylinder 2795 kg
Rated Operating Capacity with Optional Counterweight 2431 kg
Ground Pressure - With 450 mm/17.7 in Track 33 kPa
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1...
Rated Operating Capacities - 50% Tipping Load 2315 kg
Ground Contact Area - With 450 mm/17.7 in Track 1.59 m²
Noise Level
Inside Cab* 83 dB(A)
Outside Cab** 104 dB(A)
Note (2) *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling...
Weights
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1...
Noise Level
Note (3) **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Dimensions
Roll Back Angle 25°
Noise Level
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Air Conditioning System (if equipped)
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Doriti un sfat sau o recomandare?

Contactati-ne acum!

Sunati-ne
+40747185657
CONTACTATI-NE