Miniincarcatoare pe roti Cat® 236D3
Utilaj nou, second-hand sau de inchiriat, dumneavoastra alegeti!
SILENTIOS sI CONFORTABIL
Cabina inchisa etans si presurizata, unica in industrie, ofera operatorului un mediu de operare mai curat si mai silentios, cu o vizibilitate excelenta asupra uneltei de lucru. Continuand tendinta lansata in industrie, seria D3 include, standard, si comenzi pe joystick-ul montat pe scaun, reglabil, pentru un confort sporit.
PERFORMANTA MAXIMA
Grupul motopropulsor de inalta performanta asigura rezultate si capacitati de productie maxime datorita Sistemului Electronic de Control al Cuplului motor, sistemului de deplasare standard cu doua viteze si acceleratiei electronice de mana/picior cu pedala de decelerare.
OPERARE MAI USOARA
Sistemul Cat® de „Nivelare Inteligenta” ofera tehnologii de top din industrie, integrare si functii precum mentinerea electronica a pozitiei cupei, revenirea uneltei de lucru la pozitia de incarcare si un dispozitiv de pozitionare a uneltei de lucru. .
CAPACITATE OPTIMIZATA A UTILAJULUI
Maximizati capacitatea si controlul asupra utilajului cu Ecranul Avansat disponibil, pentru reglaje direct de pe ecran la atasamente, la sistemul hidrostatic si controlul fluajului. in plus, utilajul dispune de setari in mai multe limbi, configuratii personalizabile, sistem de securitate si camera retrovizoare.
DEPLASARE UNIFORMA
Sistemul standard de suspensii active sensibil la viteza imbunatateste functionarea pe teren accidentat, pentru o capacitate de retinere a sarcinii mai buna, productivitate crescuta si un plus de confort. *Fotografia afisata poate prezenta un utilaj diferit de cel la care se face referire.
SPECIFICATII TEHNICE
Engine | |
---|---|
Gross Power - SAE J1995 | 55.4 kW |
Operating Specifications | |
Rated Operating Capacity | 820 kg |
Weights | |
Operating Weight | 2979 kg |
Dimensions | |
Wheel Base | 1105 mm |
Height - Top of Cab | 2082 mm |
Vehicle Width over Tires | 1676 mm |
Ground Clearance | 195 mm |
Departure Angle | 26° |
Maximum Dump Angle | 48° |
Maximum Reach - With Arms Parallel to Ground | 1353 mm |
Turning Radius from Center - Machine Rear | 1639 mm |
Bucket Pin Height - Maximum Lift | 3122 mm |
Length - Without Bucket | 2767 mm |
Rack Back Angle - Maximum Height | 91° |
Turning Radius from Center - Bucket | 2107 mm |
Turning Radius from Center - Coupler | 1314 mm |
Clearance at Maximum Lift and Dump | 2359 mm |
Reach - Maximum Lift/Dump | 408 mm |
Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no... |
Bumper Overhang - Behind Rear Axle | 1021 mm |
Maximum Overall Height | 3977 mm |
Length - With Bucket on Ground | 3487 mm |
Bucket Pin Height - Carry Position | 190 mm |
Hydraulic System | |
Hydraulic Flow - Standard - Loader Hydraulic Flow | 76 l/min |
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure | 23000 kPa |
Hydraulic Flow - Standard - Hydraulic Power (Calculated) | 29 kW |
Hydraulic Flow - Standard - Loader Hydraulic Pressure | 23000 kPa |
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow | 112 l/min |
Hydraulic Flow - High Flow - Hydraulic Power (Calculated) | 43 kW |
Cab | |
ROPS | ISO 3471:2008 |
FOPS | ISO 3449:2005 Level I |
Power Train | |
Travel Speed - Forward or Reverse - Two Speed Option | 17.1 km/h |
Travel Speed - Forward or Reverse - One Speed | 11.2 km/h |
Service Refill Capacities | |
Chain Box - Each Side | 8.8 l |
Cooling System | 14 l |
Engine Crankcase | 11 l |
Fuel Tank | 94 l |
Hydraulic System | 50 l |
Hydraulic Tank | 39 l |
Engine | |
Net Power - SAE 1349 | 54.6 kW |
Displacement | 3.3 l |
Stroke | 120 mm |
Bore | 94 mm |
Net Flywheel Power | 54.6 kW |
Engine Model | Cat 3.3B DIT (turbo) |
Peak Torque - 1,500 rpm - SAE J1995 | 265 N·m |
Net Power - ISO 9249 | 55.1 kW |
Operating Specifications | |
Tipping Load | 1635 kg |
Breakout Force - Tilt Cylinder | 2269 kg |
Rated Operating Capacity with Optional Counterweight | 910 kg |
Noise Level | |
Outside Cab** | 101 dB(A) |
Note (2) | *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling... |
Weights | |
Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no... |
Noise Level | |
Note (3) | **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
Inside Cab* | 83 dB(A) |
Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
Operating Specifications | |
Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no... |
Air Conditioning System (if equipped) | |
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. |
Contactati-ne acum!