Underground Mining Load Haul Dump (LHD) Loaders Caterpillar R1700G
Engineered for performance, designed for comfort, built to last.
Customer Support – Cat dealer services keep underground mining equipment productive.
Cat dealers offer solutions, services and products that help lower costs, enhance productivity and manage your operation efficiently. From the selection of Cat equipment until the day you rebuild, trade or sell it, the support you get from your Cat dealer makes the difference that counts.
Cat dealers will provide the level of support you need, on a global scale. Dealer expert technicians have the knowledge, experience, training and tooling to handle your repair and maintenance needs, when and where you need them.
When Cat products reach the field, they are supported 24/7 by a worldwide network of reliable and prompt parts distribution facilities, dealer service centers, and technical training facilities to keep your equipment up and running.
Cat equipment is designed and built to provide maximum productivity and operating economy throughout its working life. Cat dealers offer a wide range of service plans that will maximize return on your investment, including:
- Preventive Maintenance Programs
- Diagnostic Programs, such as Scheduled Oil Sampling and Technical Analysis
- Rebuild and Reman Options
- Customer Support Agreements
Cat dealers offer a range of advanced technology products designed to improve efficiency, productivity and lower costs. VIMS™ Gen 3 and Command for Underground options available from factory.
Today’s complex products require operators have a thorough understanding of machine systems and operating techniques to maximize efficiency and profitability. Your Cat dealer can arrange training to improve productivity, decrease downtime, reduce operating costs, enhance safety, and improve your return on investment.
Application and site-specific factors, such as: material density, loading position, grades, speeds, and haul road design influence operating and maintenance costs. Your Cat dealer can provide you with the understanding to optimize productivity and the total cost of ownership.
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com.
Power Train – Engine – The Cat C11 engine is designed for power, reliability and efficiency.
The Cat C11 engine provides unequalled lugging force while digging, tramming and traversing steep grades. Torque rise effectively matches transmission shift points for maximum efficiency and fast cycle times. Mechanically Actuated, Electronic Unit Injection (MEUI™) high-pressure, direct injection fuel system electronically monitors operator demands and sensor inputs to optimize engine performance. Air-to-air aftercooling provides improved fuel economy by packing cooler, denser air into cylinders for more complete combustion of fuel and lower emissions. Oil coiled pistons increase heat dissipation and promote longer piston life. The crankshaft is forged and induction hardened for long-term durability.
The Cat C11 engine features the optional Ventilation Reduction (VR) Package. The VR Package incorporates selective engine hardware and software to minimize diesel particulate matter in the engine exhaust. Engines equipped with the VR Package feature a significant ventilation rate reduction, maintains fuel consumption, and maintained or improved product performance. VR Package availability is subject to regional regulatory compliance. Engines that emit equivalent to U.S. EPA Tier 3 and EU Stage IIIA are also available.
A Cat Diesel Particulate Filter can be used with the VR engine package. This filter compliments the VR engine by further reducing particulate matter in the exhaust. Requires the use of 15 PPM ultra low sulfur diesel and CJ-4 low ash engine oil.
Power Train – Transmission – More power to the ground for greater productivity.
Power Shift Transmission
The Cat four-speed planetary power shift transmission is matched with the Cat C11 engine to deliver constant power over a wide range of operating speeds.
Designed for rugged underground mining conditions, the proven planetary power shift transmission is built for long life between overhauls.
High capacity torque converter delivers more power to the wheels for superior power train efficiency.
Electronic Auto Shift Transmission
The electronic auto shift transmission increases operator efficiency and optimizes machine performance. The operator can choose between manual or auto shift modes.
Using the left brake pedal, the operator can engage the service brakes and neutralize the transmission, maintaining high engine rpm for full hydraulic flow, enhancing digging and loading functions.
Cat final drives work as a system with the planetary power shift transmission to deliver maximum power to the ground. Built to withstand the forces of high torque and impact loads, double reduction final drives provide high torque multiplication to further reduce drive train stress.
Oscillating Rear Axle
Oscillating rear axle ensures four-wheel ground contact for maximum traction and stability at all times.
Fully enclosed oil immersed disc brakes incorporate independent service and parking brake pistons. Hydraulic actuated independent circuits provide improved performance and reliability.
Safety – Designed with safety as the first priority.
Caterpillar has been and continues to be proactive in developing mining machines that meet or exceed safety standards. Safety is an integral part of all machine and systems designs.
Engine Shut Off Switch
A secondary engine shutoff switch is located at ground level.
Integral ROPS Cab
Integral to the cab and frame, the ROPS is resiliently mounted to the frame to isolate the operator from vibration for a more comfortable ride.
Four corner oil-cooled braking system provides excellent control. The service brake system is actuated by modulated hydraulic pressure, while the parking brake function is spring applied and hydraulic released. This system assures braking in the event of loss of hydraulic pressure.
Standard Safety Features
Anti-skid upper deck surfaces, ground level compartment sight gauges, increased visibility, 3-point access to cab and machine, push out safety glass, suspension seat, inertia reel retractable seat belt, lift arm support pins, hot and cold side of engine, steering frame lock, hinged belly guards.
For more complete information on safety, please visit www.cat.com/safety.
Structures – Rugged Cat structures – the backbone of the R1700G’s durability.
The frame is engineered to withstand extreme forces generated during loading and tramming cycles. Precision manufacturing process ensures all structures are consistently built to high quality. Deep penetration and consistent welds throughout the frame ensures structures are solidly fused to provide sturdy platform for the linkage and the axles. The design and manufacturing quality of Cat LHD frames have been proven by our customers, many of whom reuse frames during machine rebuilds to get 2nd and 3rd lives out of their LHD’s.
Spread hitch design widens the distance between upper and lower hitch plates to distribute forces and increase bearing life. Thicker hitch plates reduce deflection. The wide opening provides easy service access. Upper and lower hitch pins pivot on roller bearings to distribute horizontal and vertical loads over a greater surface area. Shim adjusted preload reduces maintenance time. An on-board steering frame lock pin is fitted to prevent articulation during maintenance and service.
Sealed colleted pins are fitted to all major bucket and lift arm hinge points for longer pin and bushing life. This reduces maintenance costs and extends service intervals. The sealed joints retain lubrication and prevent contaminant entry.
Z-bar Loader Linkage
Proven Z-bar loader linkage geometry generates powerful breakout force and an increased rack back angle for better bucket loading and material retention. Heavy duty steel lift arms with cast steel cross tube ensures extreme loads encountered during loading and tramming are efficiently dissipated for long service life.
Buckets – Rugged performance and reliability in tough underground mining applications.
Cat LHD buckets deliver unmatched productivity and structural reliability to help lower your cost-per-ton. Buckets are available in a range of sizes to suit most material types and densities.
Optional Wear Packages
Weld-on wear plates in high wear areas are standard. Additional wear packages, including sacrificial wear strips and Cat heel shrouds protect the edges from damage and reduce the need for costly bucket rebuilds.
Cat underground loader buckets are available in two styles to meet a range of loading, hauling and dumping conditions.
- Dump buckets
- Ejector buckets
Optional Cutting Edges
Cat half arrow and cast half arrow cutting edges extend bucket life in high wear applications.
An additional weld-on GET option is the Cat weld-on GET. Available weld-on GET offers more wear material to maximize system wear life and bucket protection. Downtime is also reduced by an even wear rate between corners and edge segments, allowing both to be replaced at the same time.
The Cat Bolt-On Half Arrow (BOHA) GET System allows a step up over the Cat Weld On (CWO) offering. With an industry recognized bolt-on retention system, this GET is designed for extreme conditions in abrasive environments where traditional Weld-on GET is subject to high wear rates.
Cat Mechanically Attached Shrouds (MAS) are also available on the R1700G buckets to provide non weld-on option for hardware selection to better suit application.
The MAS can be further protected with the installation of the Cat Mechanically Attached Wear Plates (MAWPS) to protect the bucket base and cutting edge.
Hydraulics – Cat hydraulics deliver the power and control to keep material moving.
Powerful Cat hydraulics deliver exceptional digging and lifting forces and fast cycle times.
Lift and Tilt System
High hydraulic flow rates provide fast hydraulic cylinder response and powerful lift forces. Large-bore tilt and lift cylinders deliver exceptional strength, performance and durability.
Low effort, pilot operated joystick implement control with simultaneous lift and tilt functions optimizes operating efficiency. Optional hydraulic controls enable an ejector bucket to be controlled from a switch on the bucket control joystick.
STIC™ control system integrates steering and transmission functions into a single controller for maximum responsiveness and smooth control.
Optional Ride Control
The optional ride control system uses a nitrogen filled oil accumulator in the hydraulic lift circuit to act as a shock absorber for the bucket and lift arms. The lift arm and bucket response to movement is dampened over rough ground, reducing fore and aft pitch, improving cycle times and load retention. A smoother, more comfortable ride gives operators the confidence to travel at higher speeds during load and carry operations.
Cat Hydraulic Hose
Field proven Cat high pressure XT hydraulic hoses are exceptionally strong and flexible for maximum system reliability and long life in the most demanding conditions. Reusable couplings with O-ring face seals provide superior, leak free performance and prolong hose assembly life.
Operator Comfort – Ergonomically designed for all-day comfort, control and productivity.
The operator station is ergonomically designed for total machine control in a comfortable, productive and safe environment. All controls, levers, switches and gauges are positioned to maximize productivity and minimize operator fatigue.
Integral to the cab and frame, the Rollover Protective Structure (ROPS) and the Falling Objects Protective Structure (FOPS), are resiliently mounted to the frame to isolate the operator from vibration for a more comfortable ride.
Optional Enclosed Cab
Optional sound-suppressed ROPS cab provides a quiet, secure working environment. Large window openings offer excellent visibility in all directions. Enclosed design provides fresh, pressurized, temperature-controlled air circulation for a more comfortable working environment.
STIC Steering and Transmission Integrated Control
STIC provides effortless control of the machine by a single controller. Simple side-to-side motion articulates the machine. Directional shifting (forward/neutral/reverse) is controlled using a three position rocker switch. The thumb operated buttons control gear selection.
Cat Electronic Monitoring System (Cat EMS) continuously provides critical machine data to keep the machine performing at top production levels.
Low-effort pilot operated joystick controls integrate steering, transmission and implement functions for smoother, faster cycles with less operator fatigue.
Serviceability – More time for production.
Easy access to daily service points simplifies servicing and reduces time spent on regular maintenance procedures.
Allows convenient servicing to all tanks, filters, lubrication points and compartment drains. Electric fuel priming. Engine oil and fuel filters installed on cold side of engine.
Radial seal air filters are easy to change, reducing time required for air filter maintenance.
Fluid level checks are made easier with sight gauges.
Cat Electronic Technician (Cat ET) service tool enables quick electronic diagnosis of machine performance and key diagnostic data for effective maintenance and repairs.
Sealed Electrical Connectors
Electrical connectors are sealed to lock out dust and moisture. Harnesses are covered for protection. Wires are color and number coded for easy diagnosis and repair.
Scheduled Oil Sampling
S·O·SSM helps avoid minor repairs becoming major ones. Sample point adapters fitted standard to machine.
|Engine Model||Cat® C11|
|Gross Power - SAE J1995||263 kW|
|Rated Power||1800 r/min|
|Gross Power - Tier 3 Engine - SAE J1995 (1st-3rd Gear/4th Gear)||242/263 kW (324/353 hp)|
|Note (1)||Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard.|
|Gross Power - Equivalent to U.S. EPA Tier 3/EU Stage IIIA - SAE J1995 (1st-3rd gear/4th gear)||242/263 kW (324/353 hp)|
|Note (5)||Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available.|
|Note (2)||Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 inHg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).|
|Note (3)||Engine derate will commence at an altitude of 3050 m (10,006 ft).|
|Note (4)||Optional Ventilation Reduction package available.|
|Gross Power - VR Engine - SAE J1995||263 kW|
|Nominal Payload Capacity||12500 kg|
|Breakout Force - SAE||20885 kg|
|Static Tipping Load - Full Turn - Lift Arms Horizontal||26306 kg|
|Gross Machine Mass - Truck Loading||53000 kg|
|Gross Machine Mass - Tramming||54500 kg|
|Static Tipping Load - Straight Ahead - Lift Arms Horizontal||31781 kg|
|Nominal Payload Capacity - Tramming||14000 kg|
|Nominal Payload Capacity - Truck Loading||12500 kg|
|Loaded - Front Axle||37077 kg|
|Empty - Front Axle||16940 kg|
|Loaded - Tramming||52500 kg|
|Empty - Rear Axle||21560 kg|
|Loaded - Rear Axle||13923 kg|
|Forward - 1||4.7 km/h|
|Forward - 2||8.3 km/h|
|Forward - 3||14.3 km/h|
|Forward - 4||24.1 km/h|
|Reverse - 1||5.4 km/h|
|Reverse - 2||9.4 km/h|
|Reverse - 3||16.4 km/h|
|Reverse - 4||25.3 km/h|
|Hydraulic Cycle Times|
|Total Cycle Time||12.1 s|
|Lower, Empty, Float Down||2.4 s|
|Ejector Bucket||5.7 m³|
|Dump Bucket - 1||4.6 m³|
|Dump Bucket - 2||5 m³|
|Dump Bucket - 4||6.6 m³|
|Dump Bucket - 3 - Standard Bucket||5.7 m³|
|Bucket Capacity||4.6-8.8 m³ (6.0-11.5 yd³)|
|Dump Bucket - 5||7.3 m³|
|Dump Bucket - 6||8.8 m³|
|Inner Clearance Radius**||3229 mm|
|Outside Clearance Radius**||6878 mm|
|Tire Size||26.5 × 25|
|Service Refill Capacities|
|Front Differential and Final Drives||90 l|
|Engine Crankcase - With Filter||34 l|
|Rear Differential and Final Drives||90 l|
|Fuel Tank||569 l|
|Cooling System||63 l|
|Secondary Fuel Tank - If Equipped||446 l|
|Hydraulic Tank||125 l|
|Standards||ROPS/FOPS Certified Cab|
|Note||**Clearance Dimensions are for reference only.|