Waste Handler Track Loaders Caterpillar 953K WH

From loading and sorting to excavation and spreading cover material, the track loader is one of the most versatile pieces of equipment in your landfill or transfer station. Waste Handling arrangements feature added guarding and seals to gives you a purpose-built machine to take on the challenges of waste applications. A choice of buckets and track shoes allow you to further optimize the machine for greater performance and service life. The new Cat crawler loaders offer added fuel efficiency over the previous models, as well as greater comfort and improved implement and steering response.

Utilaj nou, second-hand sau de inchiriat, dumneavoastra alegeti!

Waste Hander Track Loaders

Fuel Efficiency

More fuel efficient Cat engines with ACERT technology and Eco Mode combine to give you a 10-25 percent reduction in fuel use.*


Smarter power train management gives you power when you need it and improved implement and steering response.*

Ease of Operation

Cab updates offer added comfort and convenience for operators. New handles and steps make access/egress even easier from the front or the back of the tracks.


Remote monitoring with Product Link™/VisionLink® helps you manage your fleet more effectively and profitably.

Note: Extreme Service model shown. Guarding and features may vary by machine model. Please consult your Cat dealer for details.

*Compared to previous models.

Specificatii tehnice


Engine Model Cat C7.1 ACERT
Engine Power - Maximum - ISO 14396 129 kW
Track Shoe Type Double Grouser
Track on Ground 2320 mm
Track Gauge 1836 mm
Service Refill Capacities
Fuel Tank 265 l
Cooling System 32 l
Operating Weight 15720 kg
Capacity - General Purpose Landfill 2.3 m³
Capacity - General Purpose 1.8 m³
Capacity - Performance Series 2.1 m³
Capacity - Multi-Purpose 1.6 m³
Capacity - Landfill 2.3 m³
Bucket Width - General Purpose 2485 mm
Bucket Width - Performance Series 2536 mm
Bucket Width - Landfill 2485 mm
Emissions U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4 or China Nonroad Stage III, India Bharat III, Eurasian Economic Union Stage IIIA UN ECE R96 Stage IIIA emission standards, equivalent to Tier 3/Stage IIIA
Engine Power - Maximum - ISO 14396 (DIN) 129 kW
Net Power - Rated - ISO 9249/SAE J1349 115 kW
Net Power - Rated - ISO 9249/SAE J1349 (DIN) 115 kW
Bore 105 mm
Stroke 135 mm
Displacement 7.01 l
Service Refill Capacities
DEF Tank 16 l
Bucket Width - Multi-Purpose 2471 mm
Dimensions (Approximate)
Ground Clearance 417 mm
Machine Height - Top of Cab 3155 mm
Length - Front of Track 4545 mm
Overall Machine Length* 6389 mm
Carry Position Approach Angle 15°
Digging Depth* 140 mm
Maximum Rollback - Ground 43°
Maximum Rollback - Carry Position 50°
Bucket Height - Carry Position 548 mm
Reach at Full Lift Height and 45° Dump* 1195 mm
Clearance at Full Lift Height and 45° Dump* 2694 mm
Maximum Rollback - Fully Raised 52°
Maximum Dump, Fully Raised 53°
Grading Angle 74°
Height - Bucket Hinge Pin 3610 mm
Overall Machine Height - Bucket Fully Raised 5487 mm
Height - Top of Seat with Headrest 2596 mm
Height - Top of Stack 2804 mm
Ramp Angle 29°
Note *With general purpose bucket and extra duty teeth.
Engine Power - Maximum - SAE J1995 132 kW
Note (1) Engine ratings at 1,800 rpm.
Note (2) All nonroad Tier 4 Interim and Final, Stage IIIB and IV and Korea Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) with 15 ppm (mg/kg) of sulfur or less, or up to B20 biodiesel blended with ULSD. B20 should meet ASTM...
Note (3) Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Weights - Waste Handler
Operating Weight* 15720 kg
Operating Weight 15433 kg
Shipping Weight* 14455 kg
Shipping Weight 14168 kg
Note *Machine equipped with Tier 4 Final/Stage IV emissions reduction technology.
Note Bucket equipped with teeth and segments.
Track Shoe Width - Standard Shoe/Center Hole 480 mm
Track Rollers/Shoes - Each Side 6 Rollers/37 Shoes - Each Side
Ground Contact Area - Standard Shoe/Center Hole 2.2 m²
Ground Pressure* - Standard Shoe/Center Hole** 60.7 kPa
Ground Pressure - Standard Shoe/Center Hole** 59.6 kPa
Grouser Height 35 mm
Link Pitch 190 mm
Note (1) *Machine equipped with Tier 4 Final/Stage IV emissions reduction technology.
Note (2) **ISO 16754:2008.
Note (3) Ground pressure is calculated using operating weight of machine with General Purpose bucket, teeth and segments.
Air Conditioning System
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.1 kg of refrigerant which has a CO2 equivalent of 1.573 metric tonnes.
Dimensions (Approximate)
Overall Machine Width without Bucket: With Standard Tracks - 480 mm (19.7 in) Shoes 2316 mm
Overall Machine Width without Bucket: With Wide Gauge Tracks - 800 mm (31.5 in) Shoes 2936 mm
Note Dimensions vary with bucket. Refer to Operating Specifications chart.
Doriti un sfat sau o recomandare?

Contactati-ne acum!