Waste Handler Track Loaders Caterpillar 973K WH

From loading and sorting to excavation and spreading cover material, the track loader is one of the most versatile pieces of equipment in your landfill or transfer station. Waste Handling arrangements feature added guarding and seals to gives you a purpose-built machine to take on the challenges of waste applications. A choice of buckets and track shoes allow you to further optimize the machine for greater performance and service life. The new Cat crawler loaders offer added fuel efficiency over the previous models, as well as greater comfort and improved implement and steering response.

Utilaj nou, second-hand sau de inchiriat, dumneavoastra alegeti!

Waste Hander Track Loaders

Fuel Efficiency

More fuel efficient Cat engines with ACERT technology and Eco Mode combine to give you a 10-25 percent reduction in fuel use.*


Smarter power train management gives you power when you need it and improved implement and steering response.*

Ease of Operation

Cab updates offer added comfort and convenience for operators. New handles and steps make access/egress even easier from the front or the back of the tracks.


Remote monitoring with Product Link™/VisionLink® helps you manage your fleet more effectively and profitably.

Note: Extreme Service model shown. Guarding and features may vary by machine model. Please consult your Cat dealer for details.

*Compared to previous models.

Specificatii tehnice


Engine Model Cat C9.3 ACERT
Operating Weight 29175 kg
Capacity - General Purpose Landfill 4.9 m³
Emissions Tier 4 Final/EU Stage IV/Korea Tier 4
Engine Power - Maximum - ISO 14396 (DIN) 228 kW
Net Power - Rated - ISO 9249/SAE J1349 (DIN) 205 kW
Bore 115 mm
Stroke 149 mm
Displacement 9.3 l
Note (1) Engine ratings at 1,800 rpm.
Note (2) All nonroad Tier 4 Interim and Final, Stage IIIB and IV and Korea Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) with 15 ppm (mg/kg) of sulfur or less, or up to B20 biodiesel blended with ULSD. B20 should meet ASTM...
Note (3) Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Service Refill Capacities
Fuel Tank 384 l
Cooling System 44 l
DEF Tank 35 l
Weights - Waste Handler
Operating Weight 29175 kg
Shipping Weight 26710 kg
Capacity - General Purpose 3.2 m³
Capacity - Performance Series 3.8 m³
Capacity - Multi-Purpose 3 m³
Capacity - Landfill 4.9 m³
Bucket Width - General Purpose 2974 mm
Bucket Width - Performance Series 2982 mm
Bucket Width - Multi-Purpose 2946 mm
Bucket Width - Landfill 2974 mm
Note Bucket equipped with teeth and segments.
Track Shoe Type Double Grouser
Track Shoe Width - Standard Shoe/Center Hole 550 mm
Track Rollers/Shoes - Each Side 7 Rollers/40 Shoes - Each Side
Track on Ground 2930 mm
Ground Contact Area - Standard Shoe/Center Hole 3.66 m²
Ground Pressure - Standard Shoe/Center Hole** 77.6 kPa
Grouser Height 49 mm
Track Gauge 2160 mm
Link Pitch 215.9 mm
Note (1) **ISO 16754:2008.
Note (2) Ground pressure is calculated using operating weight of machine with General Purpose bucket, teeth and segments.
Air Conditioning System
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.
Dimensions (Approximate)
Overall Machine Width without Bucket: With Standard Tracks - 480 mm (19.7 in) Shoes 2710 mm
Overall Machine Width without Bucket: With Wide Gauge Tracks - 800 mm (31.5 in) Shoes 3145 mm
Ground Clearance 469 mm
Machine Height - Top of Cab 3510 mm
Length - Front of Track 5323 mm
Overall Machine Length* 7579 mm
Carry Position Approach Angle 15°
Digging Depth* 158 mm
Maximum Rollback - Ground 43°
Maximum Rollback - Carry Position 47°
Bucket Height - Carry Position 483.5 mm
Reach at Full Lift Height and 45° Dump* 1366 mm
Clearance at Full Lift Height and 45° Dump* 2952 mm
Maximum Rollback - Fully Raised 59°
Maximum Dump, Fully Raised 49°
Grading Angle 85°
Height - Bucket Hinge Pin 4218 mm
Overall Machine Height - Bucket Fully Raised 6262 mm
Height - Top of Seat with Headrest 2988 mm
Height - Top of Stack 3069 mm
Ramp Angle 29°
Note *With general purpose bucket and extra duty teeth.
Note Dimensions vary with bucket. Refer to Operating Specifications chart.
Doriti un sfat sau o recomandare?

Contactati-ne acum!