Algeria 
Belgium 
France 
Luxembourg 
Poland 
Waste Handling Dozers Caterpillar D8T WH
From pushing trash to spreading cover, and cell construction to closing, Cat® Waste Handlers are designed and manufactured from the frame up to take on the demands of landfill work.
Utilaj nou, second-hand sau de inchiriat, dumneavoastra alegeti!
Technology
- Cat Slope Indicate (Standard) shows cross slope and mainfall on the primary machine display to help operators work more confidently.
- Cat GRADE with 3D (Optional) is an integrated grade control system that helps operators grade with more accuracy and efficiency. Antennas mount on top of the cab – not on the blade – so they are safely out of the way of landfill debris.
- Cat AccuGrade™ (Optional) is a dealer-installed aftermarket grade-control system that provides increased grading versatility and the ability to scale capacity to changing needs, providing a choice of lasers for 2D flat-plane and slope work, Global Navigation Satellite System (GNSS) control for complex 3D cuts and contours, and/or systems using a Universal Total Station (UTS) for fine and finish grading.
- Cat AccuGrade Ready Option (ARO) (Optional) allows you to easily install or upgrade to Cat AccuGrade 2D and 3D grade-control systems to add versatility and resale value to your machine.
- Remote monitoring with Product Link™*/VisionLink® helps you manage your fleet more effectively and profitably.
Durability
- Specialized guarding throughout the machine helps protect major components like the chassis, fuel tank and hydraulic tank from impact and airborne debris.
- Final drive guarding helps prevent wire wrap and helps keep dirt and debris away from the Duo-Cone™ seals.
- Pivot shaft seal guards help prevent debris from entering and damaging seals.
- Striker bars help prevent debris from damaging the machine, and added seals help reduce the amount of material entering engine and transmission compartments.
- Rotating bushings on tilt cylinders helps wrapping material to roll off hoses.
- Heavy duty hinged radiator guard protects radiator and fan from penetration by material coming straight in or from under the blade.
- Cooling system designed for high debris environments, with automatic reversing fan and swing-out access for cleanout with an air wand.
- Laminated thermal shields and insulated Clean Emissions Module.
- Hinged belly guard for easy cleaning.
- Landfill blades and center-hole track shoes help you optimize your waste handler for the job.
- Lights mounted up and away from main debris area for protection, while still giving you plenty of light on the work area.
Ease of Operation
- Comfortable, quiet operator station with excellent visibility and air handling features to help keep dust out/provide air filtration.
- Enhanced AutoShift allows your operator to select optimum ground speed for the job and helps save fuel by automatically choosing the more efficient gear based on load.
- Low effort, responsive controls for precision and ease of operation.
- Selectable electro-hydraulic maps let you set implement response to match operator preferences and application.
- Rear vision camera available to enhance visibility behind the machine.
- Meets U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4 emission standards with emissions technology that is transparent – no action required from the operator, no stopping for regeneration.
Specificatii tehnice
SPECIFICATII TEHNICE
| Engine | |
|---|---|
| Engine Model | Cat C15 ACERT™ |
| Flywheel Power | 252 kW |
| Bore | 137 mm |
| Stroke | 172 mm |
| Displacement | 15.2 l |
| Net Power - 1,900 rpm - ISO 9249/SAE J1349 (DIN) | 233 kW |
| Net Power - Maximum - ISO 9249/SAE J1349 DIN at 1,700 rpm | 252 kW |
| Net Power - 1,900 rpm - ISO 9249/SAE J1349 | 233 kW |
| Net Power - Maximum - ISO 9249/SAE J1349 at 1,700 rpm | 252 kW |
| Weights | |
| Operating Weight | 39366 kg |
| Shipping Weight | |
| Standard Waste Handler | 33324 kg |
| Operating Weights | |
| LGP Waste Handler | 41586 kg |
| Shipping Weight | |
| LGP Waste Handler | 35367 kg |
| Operating Weights | |
| Standard Waste Handler | 39366 kg |
| Dimensions - Standard | |
| Machine Height - Grouser Tip - Exhaust Stack | 3472 mm |
| Machine Height - Grouser Tip - Length of Track on Ground | 3206 mm |
| Dimensions - LGP | |
| Without Trunnions - Standard Shoe Width | 3302 mm |
| Dimensions - Non-Suspended | |
| Machine Height - Grouser Tip - Ground Clearance | 606 mm |
| Dimensions - Standard | |
| Height - Top of Roof-Mounted Precleaner | 3706 mm |
| Dimensions - Non-Suspended | |
| Height - Top of Roof-Mounted Precleaner | 3706 mm |
| Machine Height - Grouser Tip - Length of Track on Ground | 3258 mm |
| Dimensions - LGP | |
| Length - Basic Tractor - Tag Link Trunnion to Tip - Rear Grouser* | 4647 mm |
| Dimensions - Non-Suspended | |
| Height - Grouser | 78 mm |
| Note | *With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in. |
| Dimensions - Standard | |
| Width - Tractor - Over Trunnions | 3057 mm |
| Machine Height - Grouser Tip - EROPS (Top of Railing) | 3566 mm |
| Dimensions - LGP | |
| Width - Tractor - Over Trunnions | 3311 mm |
| Length - Basic Tractor - With Striker Bars with Two Counterweights* | 5256 mm |
| Dimensions - Standard | |
| Track Gauge | 2083 mm |
| Dimensions - Non-Suspended | |
| Machine Height - Grouser Tip - EROPS (Top of Railing) | 3575 mm |
| Dimensions - Standard | |
| Height - Grouser | 78 mm |
| Dimensions - Non-Suspended | |
| Track Gauge | 2083 mm |
| Machine Height - Grouser Tip - Exhaust Stack | 3463 mm |
| Dimensions - Standard | |
| Machine Height - Grouser Tip - Ground Clearance | 613 mm |
| Dimensions - Non-Suspended | |
| Width - Tractor - Over Trunnions | 3057 mm |
| Dimensions - LGP | |
| Height - Top of Roof-Mounted Precleaner | 3706 mm |
| Dimensions - Standard | |
| Length - Basic Tractor - With Striker Bars with Two Counterweights* | 5256 mm |
| Dimensions - LGP | |
| Track Gauge | 2337 mm |
| Dimensions - Non-Suspended | |
| Length - Basic Tractor - With Striker Bars with Two Counterweights* | 5256 mm |
| Without Trunnions - Standard Shoe Width | 2693 mm |
| Dimensions - Standard | |
| Without Trunnions - Standard Shoe Width | 2693 mm |
| Dimensions - LGP | |
| Machine Height - Grouser Tip - Exhaust Stack | 3295 mm |
| Dimensions - Standard | |
| Length - Basic Tractor - Tag Link Trunnion to Tip - Rear Grouser* | 4647 mm |
| Note | *With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in. |
| Dimensions - Non-Suspended | |
| Length - Basic Tractor - Tag Link Trunnion to Tip - Rear Grouser* | 4647 mm |
| Dimensions - LGP | |
| Height - Grouser | 78 mm |
| Blades - Capacity (SAE J1265) | |
| 8 U Landfill | 21.2 m³ |
| Blades - Width - Over End Bits | |
| 8 SU LGP Landfill | 4531 mm |
| 8 SU Landfill | 3931 mm |
| Blades - Capacity (SAE J1265) | |
| 8 SU LGP Landfill | 22.1 m³ |
| Blades - Width - Over End Bits | |
| 8 U Landfill | 4251 mm |
| Blades - Capacity (SAE J1265) | |
| 8 SU Landfill | 19.6 m³ |
| Transmission | |
| 2 Forward | 6.1 km/h |
| 1 Reverse | 4.5 km/h |
| 3 Forward | 10.6 km/h |
| Dimensions - LGP | |
| Machine Height - Grouser Tip - Ground Clearance | 613 mm |
| Transmission | |
| 3 Reverse | 14.2 km/h |
| Dimensions - LGP | |
| Machine Height - Grouser Tip - Length of Track on Ground | 3206 mm |
| Note | *With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in. |
| Transmission | |
| 1 Forward | 3.4 km/h |
| Dimensions - LGP | |
| Machine Height - Grouser Tip - EROPS (Top of Railing) | 3566 mm |
| Engine | |
| Note (3) | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.5 kg of refrigerant which has a CO2 equivalent of 3.575 metric tonnes. |
| Transmission | |
| 2 Reverse | 8 km/h |
| Engine | |
| Emissions | Tier 4 Final/Stage IV/Korea Tier 4 |
| Note (2) | Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. |
| Note (1) | All non road Tier 4 Interim and Final, Stage IIIB and IV, and Korea Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend... |
Doriti un sfat sau o recomandare?
Contactati-ne acum!
Sunati-ne
+40747185657
